Inside the Simplex 4100ES
Vložit
- čas přidán 5. 09. 2024
- Here is a quick overview of the inside of the Simplex 4100ES. Quite a few people have been asking to see what the inside looks like. Keep in mind that not every ES looks exactly the same inside since you are able to add different cards and power supplies. Enjoy!
Wow, what a panel. Thank you for sharing this with the community.
My pleasure!
Our condo just did a upgrade from 4100 to 4100es, as the display was going out…
Thanks for the walk thru! That 4100es sticker for the front sure is pricy! Lol
Awesome! Definitely a panel that someday I want to get, but it's a monster of a panel (not to mention it also costs a pretty penny). Very thorough and informational video though, and great work!
Thank you very much!
@@davidredpath4781 do a system test with the old school light and strobe plates
Cheers for doing the request! Brilliant and useful video!
Thanks! Glad it helped!
So great to be in class 🙌
Thank you sir to see this demo
Thank You very much. Keep doing this
Great Video, Dave!
Much appreciated
How warm and cold rest? And when is it correct to use them. I often come across to low battery trouble and even when i replace them the panel will not clear pressing the rest bottom, so we usually reboot the panel.
Is there another step to avoid the reboot and clean the trouble?
What to do for cutdown hooters supply in simplex 4100es??
Dang that's a lot of fancy stuff inside
Haha yea
Is it possible to swap out sps without having to program anything just power it down swapping out the old card putting in a new card then firing it back up ?
Yes, as long as the DIP switches are set correctly, you are able to replace part to part
@@davidredpath4781 awesome thanks so much ...we keep having a trouble of the sps it comes and goes .I just want to swap it out with a anew one without the headache of having them come out for any type of programing.
Hello Sir. Great Video. How can we get in contact with you please have a few questions if you do not mind.
Like the edification on this system. Q: jumping class A with class B , can you wire up using only class B ?
Pls can u make a video for 4007es hybrid, and how to connect an analog tyco speaker to it. Thanks
Don’t have a 4007ES
Hello David, can you do an example of a verification on a FA 1000 fire alarm system?
If I ever am in front of one…
what would make the system say troubled
Looking good man!
Thanks man
Great explaination video
How do you determine what voltage the panel takes so when you wire up a speaker, you don't end up damaging it.
i need contact for second stage, which terminal?
Thank you for sharing sir new supporters here
Thank you!
Nice panel!
Sure is! Thank you!
Can you add a second mic to this system
New subscriber here, we have a 4100 simplex panel here in our mall, would like to ask if what suppose to be the problem if im reading less 24v (10.2v) on the auxilliary 24v terminals?
i got one stuck in a reboot loop. how do i reset it
Nice video!
Thank you!
I have a question. If I want to make a mini voice evacuation system, I need an circuit board with auxiliary and an amplifier of simplex 4100ES? Am I correct?
No, you need the full panel.
Which NACs are the ones where addressable notification appliances like.l a 49AV-WRF or 4906-9228 get wired to???
You need an EPS for that. I do not have one in this panel.
Help me to know about the trouble terms like "no answer, bad answer ,disable mode,off,open circuit mode
No answer is when a device goes missing on the SLC loop. A bad answer would be when a device communicates with the FACP, but it is insufficient. A disable trouble is when you disable a point or a circuit on the system. An open circuit trouble is when there has been a break in the field wiring and the panel cannot see the EOL resistor.
Thank you!
Sure!
Their is not a lot of support and information on the 4100es. I really wish that the programming software is not proprietary.
Where's the loop connection
Cool panel. I have a few questions for you. 1. Since it is an es panel, does that mean you have idnac nacs that use addressable truealert es notification appliances? 2. Is software required to program the panel? 3. Or can you do programming at the panels keypad? Thanks!
Hey Caleb,
1. Yes since it is an ES panel, you do have that option to use IDNAC devices. In order to do that, you need an EPS. I only have an SPS at the moment. 2. Yes, software is required to program the panel, but it is proprietary and I don’t have it. It does not allow you to program through the front keypad. I have a friend who works for Simplex so he is the one that programmed it for me.
@@davidredpath4781 Thank you! I now have a clear understanding. Thank you for your help and merry Christmas!
Good info
Hi David, thanks for the excellent video. just curious is there by any chance that you would know why this Simplex 4100 ES control panel is constantly rebooting?
You need to contact JCI to get that fixed
Yeah it's fucked
Hi Bro I have a problem with my panel it's start and shutdown and then again restart continuesly the same to thing happen .can you plz tell me the solution.
Call tech support because they can better diagnose it than I can
It's actually a Simplex 4100U
Nope. It’s a 4100ES. CPU card makes it an ES
@@davidredpath4781 it is in a 4100U casing
@@mrmaddocs68752 right. What’s your point?
I have a home panel 4008 and need help to hook up sounder base 4098-9794 connected idnet but not sure where to hook up the sounder side?
You need auxiliary power for the sounder base
@@davidredpath4781 thanks I was trying the NAC terminals but didn’t work Aux Power now system normal 👍
What is that module you have there I would like to add some conventional smokes to my simplex 4008? Is it inexpensive way to do this like addressable module? Thanks great channel
Hi Dean, thank you for tuning in! What part are you referring to specifically? To answer your question about the 4008, you would need to use addressable modules to operate your conventional smokes.
@@davidredpath4781 trying to put 4098-9601 SD and 4098-9755 base on system but there are a lot of addressable modules I just want to make sure I don’t buy the wrong one and waste money. This is a four wire base could I do 2 wire base?
@@deanrohrbach6184 if you buy a two wire base, then you should be able to use it
How does the 4100U can change the tones and the voice on speaker strobes?
That would be done in programming.
Awesome! I came across something weird in a building a few days ago, this building had a 4010es and a 4003ec. Do you have any idea as to how those operate? I am assuming they are similar to the original 4010 and 4003.
I have an idea how they operate but I don’t know 100%
Well the 4003EC is Identical to the Wheelock safepaths so if you know how to operate a Safepath , you can operate A Simplex 4003EC. (Vice versa)
@@SomeDudeWithAnExitSign ok, I believe the 4003ec uses Simplex tones and massages not wheelock right?
@@George-yc7eq yes it dose have simplex tones and messages. Other then the tones and messages it’s still a Safepath at the end of the day.
Can you do a video of how to wire up one of your addressable simplex panels?
please PA system interface vedio send?
How can we change the voice and how do we change the slow whoop to fast whoop
Great question, you have to work for simplex in order to do that. I was able to have my panel programmed, because my buddy works for Simplex. I do not have the programming software because it’s proprietary. Hence why my buddy had to program it.
@@davidredpath4781 lucky I wish I could get a lot of free devices like a lot of you do how do you guys get a lot of free devices
Can you do a vid on how to program a simplex 4008 panel?
If I ever come in contact with one I will.
I might be able to do a video on that sometime
Do you need the XPS of is it optional?
It is optional. You will not find it on a one bay panel.
Loop not see loop where fitting
@@saidalavim4362 what?????
How is the Flex amp powered?
Through the 566-084 PDI board
Are you Anywhere near La I could really use your service
I’m on the east coast
We're a fire system for a fire alarm in
3 2 1
That’s a 4100u. Not an ES
I’ve said this before. It is a 4100ES. The CPU card is an ES. The stickers on the panel are wrong.
I don't get it; you, the title, & the description all say "4100ES", yet the cabinet, dress panel, & maybe even the circuitry are clearly that of a 4100U (plus the fact that if it really _is_ a 4100ES, it should say "Simplex" & "4100ES" near the top of the cabinet, but this one doesn't).
So the CPU card was replaced which now makes it a 4100ES. Just need to get stickers.
@@davidredpath4781 Okay then...
@@TheCarson116 Maybe if you watched the video you'll see that in the video David explains that it is infact a 4100ES but he just needs stickers to make it an ES.
looks like a "U"
Has an ES card in it.
@@davidredpath4781Oh, ya they throw me off a bit because they make an ES look like a U. And I used to work there.
install mode active trouble point
abnormal
simplex 4100es fire alarm
simplex 4100es fire alarm
master class a rui trouble
trouble point
abnormal
thats hot
Ikr
my roblox map uses one of these but it has 9838s and 4903 9102s on it lol and its march time for code
Cool man
So many wires.
This is nothing compared to the ones I have seen in the field
@@davidredpath4781 If you were to quiz me on this stuff. I would fail right away. Lol.
Simplex is the worst! Horrible!
Nah est and Siemens is the worst imo