Graffiti airbrush name design - how to cut a custom stencil.
Vložit
- čas přidán 5. 09. 2024
- In this video you will see my process for cutting a custom stencil - right on the shirt! Thanks for checking it out!
Check out my website jeffcopelandart.com
IG Jeff_Copeland_art
Tiktok @jeffcopelandart
This cutting technique is one that I normally use on custom pieces - like car portraits and stuff. It works really well as long as you use a NEW blade.
Jeff , looks really great. Nice and clean.
I’ve had really great success with “GLAD - Press -n- Seal”
No glue residue and much, MUCH less pressure needed to cut it.
I highly recommend the stuff.
Randy Bennett
Cool, I'll have to try it out. Thanks 👍
How long have you been airbrush painting?
Sir L
More than 20 years 😁
Have you ever tried lightest to darkest?
Do you do or practice airbrush exercises?
An are you purposely going slow for the video?
Ur controll is amazing bro keep up the good work
Thabks
I like the masking idea and its outcome!
Thanks
Sick. Eddie Davis told me to slightly break off tip of the blade before cutting so as not to score into the shirt...very nice technique, Jeff!
👍
Nice work. I was a little skeptical at first cause I've seen so many airbrush people that think they're the shit, but have crappy line work, and when I saw your blowout on the top of the O in the first 30seconds I was like here we go again. But your paint reduction was spot on, the line work was good, not too many double passes, and yeah I always use a fresh blade (buy them by the 100) for frisketing techniques. So bravo from a airbrush instructor who's been doing this awhile in the fine art realm.
Thanks. I struggle a bit with the video camera being in the way - I'm always spraying at an extreme angle. Otherwise I'm just painting slow so (hopefully) everyone can follow what I'm doing.
Hey,, did you ever try to 'sharpen' the dull blade with a 1000 grit sand paper? i use it all the times for cutting flames out of regular masking tape (Golden, 3M, ...). pulling three times away from the blade and it is fresh again to go for one gas tank....should work for shirts as well. Just sharp enough to not destroy the underlying clearcoat/paint layer. This trick saved me shit loads of money over the years. no need for 'sterile blades' ;)
Michael Endres actually sometimes I'll strap a blade on newspaper if it's dull. Otherwise if I am being frugal I'll just snap off a 1/8" off the tip, and voila a newish blade.
Crewchief 227 i did not know that newspaper does the trick as well. I have the same sheet of sanding paper for years. Breaking the blade does not work for me. I broke it by accident and then ended up with a ridge....but thanks for the tip. I will try it when i am in desperate need of a sharp blade ;)
I did some shirt paintings long time ago in the early 90's but the trick with the clothespin was totally new to me. Never saw this before. Very cool. thanks. Btw, never had the patience to do such lettering correctly ;) good stuff.
strange that you haven't seen that technique before, I learned it in '84, the splatter design was used a lot by Terry Hill, also done it to get asphalt look on car portraits. try it some time.
.Another nice and clean design.
Trying to learn this as a hobby , thanks for sharing the vide.
you're welcome!
Love ur work
Thanks
Awesome Job
Thanks!
Nice work boss
Very pretty boss
what type of pencil do u use to draw on the shirts. it's so clean. I've used a regular pencil and it seems like when I airbrush on top u can still see the pencil line. thanks for your amazing airbrush videos.
That's a great technique with the paper. How you didn't cut a hole in the shirt ill never know
As long as you use a new blade it's pretty easy.
Wlily savvj
Ficou muito lindo essa pintura Jeff
Thanks man!
That was awesome
🔥🔥
THIS IS ON POINT BUT THE MUSIC IS KILLIN ME. IM WAITIN FOR TRIBAL PEOPLE TO POP OUT AND EAT YOU...LOL
Hey Jeff, what is the brand and model of airbrush that you recommend???? Thanks you!
👍👍👍
🔥 thanks for the tip fam I’m thinking about leaning how to airbrush you got mad skills bro keep up the Excellent work
Nice
Thanks!
Did you cut it??? Not able to see that
What air u use thats nice work im trying to get into that myself beginner
Thanks. I use Iwata eclipse hp-bcs airbrushes.
what is the paint that you have used in this work?
I use Etac and Aqua Flow paint
I love aqua flow !!!,smells nice!
Hi ,how do you thin the paint? What brand do you use ?
For shirts I use E'tac paint. It can be thinned with a few drops of water
What kind of spray glue do you use?
Some general purpose stuff from Lowes
Can we wash it ?
Dont need put a music on this but nice vid without sound
I put it on mute and it was better for me to learn what he's doing.
💝💘💞💕
🙏
MUITO BOM!!!!!!!!!
Maurício souza-mart
👍👍👍
Maravilhosoooo
Que tipo de pintura ocupas
Jeff, how did you transfer the image before you started to airbrush on the shirt?
RAY DOG
First I sketch it on a piece of paper. Next slide it under the front of the shirt - then I simply trace it (on the shirt) with a soft graphite pencil.
thank you
and that brand new exacto isn't going to cut into that.it will if i try it.
john oktavec
It's easier than you think. You should give it a try 👍
practice makes perfect....you will learn the perfect pressure quickly...you just need to keep the blade sharp to keep the pressure the same.
Guys where do i find correct paint for Airbrush around SA Johannesburg please help me.
Leoma Teboho angelus paint
WHY does everyone have to use horrible music, I would MUCH prefer narration or even just the sound of the airbrush.
hey man I have a question for you as your airbrush is called is that I want to buy one like yours or similar could you give me the name please friend
Marlon RA that is a bottom feed iwata eclipse hp-bus. I own a lot of them. They really are the perfect airbrush
I meant hp- bcs
Yep, Iwata hp-bcs. A quick Google search will find a local dealer for you.
Jeff Copeland thank you very much friend
90's baby26 thank you very much friend
dost is masin ka naam batawo
The music is torture
Can i learning from you Jeff ?
What do you have in mind?
Jeff Copeland i want to be like you
Control
Gotta have good control
I don't need "Music" I want someone who can talk me through their process. For that reason I'M OUT!
I appreciate you taking the time to leave a comment 👍
your hand is HELLA STEADY...
Thanks
Bij een video van 11 minuten GEEN muziek doen van minder als 1 minuut word er helemaal gek van... Kijk ook niet alles door deuntje sorry ziet er wel tof uit
Mathijs Hoffman
Almost all of the free to use music is around one minute. It's really hard to pick music that is enjoyable for everyone... Sorry you didn't like it man.
do not repeat the music
Pinche músuca nada que ver con el video parte de que es enfadosa .. y del trabajo .. está padre .. me hubiera gustado mas sin música de fondo
Aleps Gonzalez
It's really hard to pick music that everyone will like... You could always just turn it down 😁
10% toy
KASPONE
Naw, maybe 72% toy 😁
ok it's not bad but not boss level :)
KASPONE
Honestly, it's more about sharing airbrush techniques. Graffiti is just what gets all the views.
toy