New LASER Power Record on my LPM?!? | LaserCube Ultra 750K Subs Special
Vložit
- čas přidán 25. 02. 2023
- Time to beat my all-time laser power record! The latest and largest LaserCube should be the strongest laser I have ever tested. I will use a laser power meter and spectrometer to hopefully verify its specs.
I will also open it up to see its inner workings and figure out the laser beam paths inside it. Quite complicated! This also means I can include instructions on how to open it up - for example to change the rechargeable battery after years of use. Perhaps the first time this has been published?
Anyway, this was meant as something special to celebrate reaching 750,000 subscribers! Thank you so much!
LaserCube Ultra 7.5W donated by www.wickedlasers.com
Laser engraver Ortur Laser Master 2 Pro donated earlier by Ortur: www.aliexpress.com/item/10050...
My Patreon-page: / brainiac75
Suggested video links:
Calculate lumens from a laser: • What makes green laser...
Crazy difference between 5W LASER and 5W LED: • Crazy difference betwe...
Zenodilodon, laser combining 36(!) red laser diodes: • Lightspace Venus 22W S...
Zenodilodon, red laser beam array alignment: • Lightspace Show Laser ...
Did you miss one of my videos?: / brainiac75
FULL MUSIC CREDITS
Time codes: 0:01 + 9:18
"Lightless Dawn" Kevin MacLeod (incompetech.com)
ISRC: USUAN1100655
Time code: 0:39
"Long Note Three" Kevin MacLeod (incompetech.com)
ISRC: USUAN1100424
Time codes: 2:37 + 12:22
"Impact Lento" Kevin MacLeod (incompetech.com)
ISRC: USUAN1100619
Time codes: 3:52 + 8:03 + 11:43
"Music for Manatees" Kevin MacLeod (incompetech.com)
ISRC: USUAN1400009
Time code: 5:37
"Perspectives" Kevin MacLeod (incompetech.com)
ISRC: USUAN1300027
Time codes: 8:58 + 11:03
"Impact Andante" Kevin MacLeod (incompetech.com)
ISRC: USUAN1100621
All music above licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
Time code: 11:15
Mix of two tracks:
1) The Shimmering by fran_ky (freesound.org/s/237363)
Licensed under Creative Commons 0 license
2) "Spacial Harvest" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1100653 - Věda a technologie
We're all anticipating the day when you're finally testing your phased plasma rifle in the 40W range.
Hehe, wish I had more time to work on that ;)
How do you use the 3 sea shells?
@@pjt You crush them into sharp pieces and pile them on the floor, then you step on them, The pain will make you curse out loud and you will get fined 2 credits for each curse word, then you take those fine slips, and there's your toilet paper.
@@aarongreenfield9038 The internet has peaked. Shut it down
@@pjt Gladly 📴
Stunning video you did there (as usual!). Thank you for opening the Cube! Your calculations, meticulous measurements and describing "what's inside" were top-notch, totally! I think we have to start working on 10W LaserCube to celebrate 1M subs with you! 😁
🔥
Congrats on the new milestone, keep up the intersting tests and informative videos :D
Thank, Tim :) Much more to come.
Thanks for the shout out! Looks like the laser head might be manufactured by OPT. Very glad to see that there is a glass plate installed in front of your reds. Those are probably open can and I have seen those glass plates be a savior for open can reds. That is a bit of power in a nice little box. I don't recognize the galvos, any markings on them/the amp?
Excellent video, and review!
Oh, one interesting thing to try with your higher power laser. Hang a black piece of thin fabric up and can the laser on it with a pattern. You should clearly hear the laser firing on the fabric from 2 foot away!
Also, a slight correction to your understanding of the lenses. You're partially correct, however the fast axis correction is normally on the laser diode, I think they are on your reds. The 3 optics after the laser diode/FAC that you see kind of work like this. The first lens is there to allow correction by shifting the collimating point and angle of the laser beam on the horizontal axis. The last 2 lenses are the collimating lenses, one for horizontal and one for vertical. Since the focal point of the horizontal output has been shifted the collimating lenses per axis can be done with lenses in different spaces from the laser diode. This break of the 2 axis allows for various trade offs like having a thinner fast axis for the knife edge mirrors with I think slightly more divergence VS the slow having a wider beam at the start but lower divergence overall. With cylindrical lenses the real trick is to think of a single laser is behaving like 2 independent ones in the same space, or at least is does for me. It's actually astonishing how well these lenses collimate multimode lasers diodes. I might be a fan of good old spherical lenses, but they limitations in flexibility.
Congrats on hitting *750.000* Subscribers! You really deserve it! 🎉🎉🎉
And of course a great Video as always 👍
Thanks, JustPyro! Glad you like and still watch my videos. Much more to come!
I love your videos! And seeing LaserCube 7.5W Ultra (which is also a part of my laser equipment) was terrific! Keep it up!
First time looking inside one of these units. Very cool. Way more complicated than I thought. I knew there was a lot of specialize parts but not the complicated arrangement.
750K subs with real high quality content is a very impressive achievement. You've earned it!
Congrats on 750k!
Thank you very much! Still find it a little hard to grasp...
This is so amazing! This kind of information is hard to come by, and the video quality is awesome. Thanks for sharing this with us.
Congratulations!!! You deserve it!
750k! Congrats and well earned! I'm always excited to get notifications about new videos on your channel. It's always some really fascinating content! This one's no exception. Those indeed are some beautiful optics.
Congratulations once again for achieving this milestone! Here's to another 750k, and even more developments in amateur science like this!
Congrats on your milestone! Can't wait for you to get to a million. I absolutely love your content and enjoyed it for the la 2 years. You taught me a lot! Big hats up to you!
Looks amazing! And congrats
Great news and thanks for the Shoutout for Zenodilodon the guys is a LEGEND!
I've learned a lot from your videos especially about lasers and safety. Thank you!
Congrats on the 750k - You prove that awesome quality videos are well needed on youtube :)
Congrats man, well deserved
Always good to see your videos.
Congratulations! You deserve it!
🤘❤️🤘
I've been watching your videos since a very long time , kinda nostalgic , congratulations
@brainiac75 I just wanted to say thank you for all of the content you make. My field of study was electrical engineering about 100 years ago. I have never worked as an EE, so your content is the only exposure I have, so thank you very much. Keep up the great content!
Fascinating video, mate. Congratulations on the 750k subs.
Wow… Great content 👍 Very high qualities video(s) Thank you so much for beaming on 😃
Congratulations! Just need 250k more but for now, let’s celebrate 🎉🎉🎉
I already know you will reach at least 1M no problem, congratulations, keep up the good work!
Congratulations on archiving such an amazing number!!!
well done on the subs man
Great video as always.
Congrats🎉
Awesome! It's really cool how they were able to get RGB laser light.
It's been awhile since I've been back to your channel. I've always wanted a laser cube when they first came out before C-19 started. I never got the chance. They seem like a legitimate company so I figured the specs were pretty accurate. Thanks for the unveiling!
Ohhh I've loved this laser for YEARS I wan one so badly to add to my DMX light show 😍
Truly amazing video.
Wow 750K subs! ¾ of the way to a million! Congrats Brian!
Congrats! The mirror set is beautiful indeed ^_^
happy 75 ....good luck ....
This channel is underrated. I enjoy all the videos. Informative, and I find this content somewhat soothing.
👍👍
Always fun to watch this.
Thanks for the early watch! I will never be tired of watching laser shows inner workings...
Stunning!!
Yo congrats for the huge milestone on your channel! I have watched your stuff for years, forgot exactly. This laser box is a beauty of bright color and mirrors! ^^
Congrats on 750k. That thing is awesome and has a price tag to match! I have a cheap half watt laser projector I bought years ago that is still pretty cool. I really should get a decent DAC to drive it with and fire it up again.
Great video! Amazing optical design!!! Congratulations on reaching so many subs! Always loved your vids from the start. I would love to see some vids about HV or just electricity as a whole. Get yourself a large HV transformer, and pull some huge arcs :)
You could also measure the spectrum of the light produced, and see how it varies with electrode material. You could also talk about power factor, resonant capacitors (and LC oscillation in general), among other things!
That was so beautiful inside.....such a work of art!
And congratulations on the 750K subs. Am thankful that I found your page (and MyPlayhouse) on that old magnet destroyed fan video you guys sent to BigClive.
I honestly love this channel. Been watching for a good few years now, and I love how easy to understand you make everything, as well as putting an emphasis on safety whenever you do something dangerous. You remind people that while this stuff is very interesting and exciting, keeping ourselves healthy is just as important as what we gain from exploring and experimenting.
Thank you for what you do!
My words, too
Thank you for this incredible video !!!
It's very pretty on the inside, congrats for the 750k
Cool new laser. Thanks for the info about it...
Outstanding progress! your inquisitiveness and honesty in a world of so much turmoil and disinformation are so refreshing to my mind, like a true Oasis shining in a sea of mirages.
Congrats
Best of luck and Congratulations !!!!
Do not get scammed by the fake brainiac75
Great video 👍
Congratulations on 750,000 subs been a long time coming. You deserve it. Keep up the great work
Thank you very much! My first video was uploaded in 2009, so it sure has been a long journey already. But I'm not stopping yet :)
@@brainiac75 I just looked back at the videos you did in the beginning and I think the first video I remember seeing was the raw magnetic force 12 years ago I had a different name on CZcams then but pretty sure I have been a subscriber since that video lol. I remember you getting the big magnets delivered and the tools you made to separate them and put them together lol. Looking forward to the future
@@brainiac75 Oh I born on 2008 ;D
ayeeee zeno! hes taught me a ton too :3 and congrats on the 750k! yeeee haw
Looking forward to this video. I am so happy that you have reached 750 000 subscribers. You are a channel who many look up to. There are so many interesting things you have shown that is both fun and valuable to watch
Thank you so much, Alexander. Much more to come!
Nice man u really deserve it :)
love the equipment expose in the case by the way, I have a number of dichromic lens/mirrors and a color combining cube that still amaze me no matter how often I get to toy around with them.
Outstanding
The precision of making the beam coliminator in the factory must be tricky !!
Congrats and thanks for your videos!
Do not get scammed by the fake brainiac75
@@metalpipe71 don't worry, I know it 👍
I love you videos mate!!
That was absoboodylutely amazing.Your photography of the diodes and light paths was so clear. I wonder how many of your subscribers will make use of the detailed instructions on how to dismantle that laser. I know that I will ever own one and wouldn't trust myself to even turn it on if I did. But thanks for letting me see the magic.
Do not get scammed by the fake brainiac75
This is amazing
very interesting coincidence with numbers
ive been watching since the laptop meets monster magnet videos and ever since ive been hooked to this channel 😅
Do not get scammed by the fake brainiac75
@@metalpipe71 yeah thanks for the heads up! these stupid scammers are all over the place but i didnt think they'd even target brainiac75..
they must be really desperate for money with the amount of channels they target..
Congratulations man I really love all your videos and hope to see many more from you!!!
Also I've got an idea could you try and place multiple pop markers next to each other to try and get that 15s warmup time
Thank you very much, Stripey! Sounds like a great idea. Will need to try if that works, though they will have to be very close :)
Congrats it's aproximated that you will reach 1M subscriber milestone in ~3 years (2yrs 9-10 months) You are my favourite youtuber I love your videos.
Congrats on the 750k!
And for the cube I have just one word.... WANTS!
Not that I know for what I would need that much power and the thought also scares me - I want to keep my and others sight intact...
Congrats on the subscriber goal. But wow. if 7.6 is roughly 92% of full power... that makes that thing actually an ... 8.3 watt combined power, if my math isn't completely out of whack. That's... uh, that's a kicker.
Yeah, not sure how high it would go given 5-10 seconds more. Should be at least 8 watts. Probably the blue diode that's going crazy ;) Thanks for the early watch!
I press like before even watching your videos.
I know it'll be good, and haven't been wrong yet.
1 Million subs is just around the corner with this type of quality content.
Tillykke med 750k!
Congrats! I think I'm watching you since 2017 at least.
Super video
I am fascinated by the rust removal lasers used in restoration videos.
Congrats on giving 3/4 of a million people a reason to subscribe to you. May the remaining 1/4 find their way to your channel to fill the million.
well deserved sir. you have a great insight and imagination to experiment with respect to the laws of nature. thanks for the great content sir.
Thanks, Michael. Much more to come!
Kæmpe tillykke med de 750k subscribers! :D
Tusind tak! Det er uvirkeligt for en jyde som mig :o)
@@brainiac75 ja det tror jeg gerne på! :D selv en glad vestjyde 🥳
Amazing
Can't wait to get my hands on mine. The 2.5 watt units are already bright. It be interesting to see the difference. No such thing as too many lasers
I see watt you did there.
Man this is a cool gizmo ❤️❤️❤️❤️
Styropyro: Hmm.. Interesting.
I love Lasers but sadly they are so expensive and i also love your videos!
Thats a well build box
Til lykke med 750K tak for skide gode videoer :-)
Fully adorable 6 beam cube 💢💢💢🥳🥳🥳
Thanks for another great video, Brian! Jeg er sikker på at du nok skal nå 1 mio. subs snart
Thank you, men der er stadig meget langt til en million...
Always a dangerous experiment to enjoy on here!
good work. nice toy.
Satme i orden! Danmark FTW! 😀
Dang that’s pretty
I would love to see you build a laser lumia optical deck attachment for that guy, like the Laser Wobbulator but better.
wow
The aperture shield was wrongly designed though.
A loose or forgotten to tighten screw should result in a closed aperture instead of open aperture.
Other than that an amazing device!
3/4 of a MILLION?!
Congratulations!
Who else wants to get him to a mil?
Unreal, right? Thank you very much - much more to come!
^^
Excellent video. I'm intrigued though to know what the other 2 most expensive items in your arsenal are. Care to share please?
Do not get scammed by the fake brainiac75
Damn this laser must have the same diode that is used in the handheld sanwu striker 7.5W model that is only 450$ USD. Its one hell of a beast.
I feel like you had 50k subscribers just yesterday
Well, time passes by fast. My first video was uploaded in 2009... Thanks for the early watch!
I once came across you with a video about how to safely separate neodinium magnets. you didn't have many movies other than with magnets. but I found your way of explaining interesting. you don't post videos very often, but you still have 750k subscriptions. congratulations on that and i hope we see you more often.
I have a handmade handheld laser smaller than most flashlights that will hit 7.65w on an LPM. There are smaller and more powerful modules out there also.
I think at this power level, safety goggles should look like ski goggles so light can't enter from the sides.
That would add some safety, though they are rated for much, much stronger lasers. Thanks for the early watch!
@@brainiac75 They're no good if the glass from the goggles isn't actually in the path of the light, even if rated at higher energies. You're the expert, so I don't need to explain it to you, but at 7.5W+, just looking at the (stationary) spot on a white background can be harmful ("indirect or non-specular reflections of the beam" and "as a result of direct, diffuse or indirect beam viewing").