On my machine the chiller is sitting beside it and hooked up To the machine, but vevor do sell them with the water tank inbuilt I think the 100w And 130w machines have that option
How is the laser holding up after over a year? Really interested in getting one but trying to decide “Chinese” brand vs omtech. They look identical to me so far with my research.
Yeh I’m pretty sure they are the same or if not vevor maybe a cheaper version but this one I have has been great iv not had any major issues with it few things to tweak here and there but for the most part I can’t fault it! 👍🏽
I don’t have a link sorry as it’s purchased from a local shop but it is just application tape the same stuff they use on vinyl decals to transfer the sticker, It’s a mid tack masking application tape! Thanks for watching 👍🏽 cheers, Matt
Yeh i definitely do just a small 5hp with I think it’s a 50L tank seems to work really well the compressor kicks on a fair bit but it is not very loud and also in a shed outside so it really doesn’t bother me, I have the ultimate air assist kit and super happy that I did do the upgrade it’s so much better than the small standard air assist they come with 😊
@@woodendayz mines is indoors I just got my omtech chiller & infinity kit. I’ve had my machine since April & haven’t Used It. My goal is to be up & running in two weeks. Any tips or advice, for indoors?
@themeditationcorner6531 I unfortunately not really as mine is outside in my shed I would only suggest making sure your extractor fan is all plumbed up good with no leaks so all the nasties vent outside, I could not imagine having the machine for that long and not using it lol you would be very keen to get it up and running hope all goes well for you 😊
@@woodendayz ikr. Anxiety took over & lack of help. I mentally shut down. Your videos help me get to the point of buying my machine. Thank You. Now I just have to put it all together. My infinity Air Filtration Kit 6", Inline Fan Carbon Filter and Ducting will be here Thursday.
Minimum I usually put about 10 lower than my maximum the minimum is the amount when the machine slows down comming in and out of a corner so it doesn’t burn up the material too much 😊
Hey thanks for a great vid, where do you get the transfer trade from?
Can you tell me a driver that you work?
What font type are you using?
Cool video! I sooooo wished you’d peel off the protective film as well!
Thanks, and yeh I should probably do that nearly 3 months in and it’s still on there haha, thanks for watching!
@@woodendayz do worry the app tape works very little burn bloom
More Videos 🥰
Still working ok mate, thinking of grabbing one
Yeh mate 100% it’s going great 👌🏽
i have the same laser . its a good starter one for me .
Yeh it’s a great machine I’m very happy with it so far
What is the model name?
Nice! But I can do 3mm wood with my little 10W diode laser. Let's see some co2-specific cuts, like clear acrylic. 🙂
Absolutely it’s on the to do list stay tuned!
What are the Chinese charging for that machine and what are the bed dimensions?
I purchased this one from vevor it was $3495 au delivered and the bed or cutting size is 700 x 500 thanks for watching, Matt 👍🏽
Can you cut 10mm acrylic with perfect sides?
Good question iv not yet cut any 10mm acrylic, I’ll do some and post the video up thanks for watching 👍🏽
Did the machine come with the water chiller inbuilt, or is the chiller sitting beside hooked up to it?
On my machine the chiller is sitting beside it and hooked up To the machine, but vevor do sell them with the water tank inbuilt I think the 100w And 130w machines have that option
How is the laser holding up after over a year? Really interested in getting one but trying to decide “Chinese” brand vs omtech. They look identical to me so far with my research.
Yeh I’m pretty sure they are the same or if not vevor maybe a cheaper version but this one I have has been great iv not had any major issues with it few things to tweak here and there but for the most part I can’t fault it! 👍🏽
Could you tell exactly or give a link for the masking tape?
I don’t have a link sorry as it’s purchased from a local shop but it is just application tape the same stuff they use on vinyl decals to transfer the sticker,
It’s a mid tack masking application tape! Thanks for watching 👍🏽 cheers, Matt
80w co2 Laser 12mm acrylic cutting possible??
Yes absolutely it is 😊
E machine me 8 fit la cutting kar sakta he
No not 8 feet
Do you use a compressor?
I was thinking about getting the Fortress
Yeh i definitely do just a small 5hp with I think it’s a 50L tank seems to work really well the compressor kicks on a fair bit but it is not very loud and also in a shed outside so it really doesn’t bother me,
I have the ultimate air assist kit and super happy that I did do the upgrade it’s so much better than the small standard air assist they come with 😊
@@woodendayz mines is indoors
I just got my omtech chiller & infinity kit.
I’ve had my machine since April & haven’t Used It.
My goal is to be up & running in two weeks.
Any tips or advice, for indoors?
@themeditationcorner6531 I unfortunately not really as mine is outside in my shed I would only suggest making sure your extractor fan is all plumbed up good with no leaks so all the nasties vent outside,
I could not imagine having the machine for that long and not using it lol you would be very keen to get it up and running hope all goes well for you 😊
@@woodendayz ikr.
Anxiety took over & lack of help.
I mentally shut down.
Your videos help me get to the point of buying my machine.
Thank You.
Now I just have to put it all together.
My infinity Air Filtration Kit 6", Inline Fan Carbon Filter and Ducting will be here Thursday.
American companies make good lasers.
American companies dont make anything
Does it have an ammeter?
No not on this model
40% is the maximum power? And the minimum?
Minimum I usually put about 10 lower than my maximum the minimum is the amount when the machine slows down comming in and out of a corner so it doesn’t burn up the material too much 😊
@@woodendayzgreat, thanks
What is the model name of this machine?
This one is a vevor 80w machine
looks same as Vevor - “VEVOR 100W CO2 Laser Engraving Machine 900x600MM w/USB Port CE & FDA Certificate”
Yeh it is but only 700x500mm
Greeaat... The "Chinese Laser" brand...
Or... How about mentioning wtf the brand actually is?
🤣😂 the brand is “vevor” hope that helps 👍🏽