Topeak E-Xplorer Trunk Bag Install on Aventon Aventure 2 E-bike (PROBLEM SOLVED)

Sdílet
Vložit
  • čas přidán 25. 08. 2024
  • Just a short video to show how I installed the Topeak Omni QuickTrack Adapter on my Aventon Aventure 2 e-bike to accommodate the Topeak E-Xplorer Trunk bag. The Topeak QuickTrack Adapter uses mounting brackets that unfortunately are too short for the Aventure 2 rear rack. This is my solution to the issue.
    Topeak Omni QuickTrack Adapter
    www.amazon.com...
    Topeak E-Xplorer Trunk Bag
    www.amazon.com...
    Scott Hardesty's video to install a Topeak Omni QuickTrack Adapter on the Aventure 2
    • Solving the Puzzle: Ho...

Komentáře • 6

  • @markmoreno7295
    @markmoreno7295 Před 12 dny

    Jody, I have the opposite problem. I have the Topeak rack on my bicycle already but I want to slide a non-Topeak bag onto it. I am told there is an adapter plate which is then riveted onto the bottom of your non-Topeak bag. Have you seen one?

    • @jodythomas
      @jodythomas  Před 12 dny +1

      @@markmoreno7295 I haven’t heard of one but I found this on Amazon. It might work for you.
      www.amazon.com/Topeak-Fixer-MTX-Rear-Basket/dp/B000FIAVNS/ref=sr_1_4?crid=198ERHBQ16L7Q&dib=eyJ2IjoiMSJ9.2OnB0rbTtmbYgOiEbdq4DPq7n1IFr2JAal4WWuI7mM7DHSpOZ036jeYjGOZPcsGEBdO9uKmDnYldGlv8yVhNZWCMhRHeWMJDwmipwpynnTuyqibDsTqdN6wP6qN3wZ4QMXFOdla7CdtPlyCxRK5QDQtB6s4xDfRPT0ily7UlkPavVTp6x_UneD8vJkZlNiii6vage-Fol3SIF-KaU1uv5lN2UOZAVqS4VQUUFLm9iKPJNRpQ-siJKEVQRJxH8Eq8yoXQY-lSvs3OZX30d3XAFxuEImsUMMPduktqZFZNXGs.I_W7K0-JcaSrvR_XXsoOLyR1IJ8GZcqK9S5J3TasdXs&dib_tag=se&keywords=topeak+fixer+8&qid=1723587422&sprefix=Topeka+fixer+%2Caps%2C140&sr=8-4#customerReviews

    • @markmoreno7295
      @markmoreno7295 Před 12 dny

      @@jodythomas yes that is the one. Thanks. I may try it on a “flatbed” board then add Velcro to my bag, this way I can make the bag work as a standalone bag or one that will attach via Velcro to my flatbed. In an emergency I can choose to rip the bag off the Velcro or unhook it from the slider rack. Thanks.

  • @Richard-jk1mp
    @Richard-jk1mp Před měsícem

    No longer works this way with the current way they are mounting the rack. You can't put the two screws in, and it isn't stable. I ended up using zip ties at the front end for stability.

    • @jodythomas
      @jodythomas  Před měsícem

      Thanks for your comment. Aventon must have changed their rear rack a 2nd time.

  • @user-sr8pn9xg8z
    @user-sr8pn9xg8z Před 3 měsíci +1

    Very good explanation Jody. You should be able to go a long way now. Thanks for sharing and God bless you.