Shrinkage for Conduit Bending Explained
Vložit
- čas přidán 13. 06. 2019
- Due to a ton of questions about Shrinkage for Conduit Bending in this video I explained how it works. Not every Electrician will factor in Shrinkage for conduit bending which is fine, but there happens to be more than than I expected.
Shrinkage is used for those that want to maximize their conduit and as long as you have the correct measurement adding for shrinkage is simple. I personally use it when I am not in a rush and have time to figure it out. Below I have the list of degrees and shrinkage for each.
DEGREE OF BEND SHRINKAGE PER INCH OF RISE
10 1/16"
22.5 3/16"
30 1/4"
45 3/8"
60 1/2"
Email me at sparkyinstructor@gmail.com
You are the best at explaining, and you’re not even holding a pipe or bending while doing it. Bravo, man. Your explanations have helped immensely.
Who gave this guy a thumb down... He one of the best to explain bends and more.... Thank you Craig
Mr. Michaud, I'm a 53 year old guy who's enrolled in an Electrical Technology program at the local university. I greatly appreciate your attention to detail and visual aids to help me understand the specifics in conduit bending and all your electrical videos. I'm glad I subscribed. Thank you, sir.
Been running pipe for years and never had this explained to me. Great video
Enjoyed the video and glad you finally mentioned what everyone wanted to hear from the beginning.
I have came across your videos and no one has ever showed me the proper way to bend conduit. I have always made it work and cut off whatever but this helps especially being in HVACR and not ever going through classes for bending conduit. Thanks again
Thanks maestro for all your advice and i love to watch your videos thanks again
Been waiting on you to make this shrinkage vid! Decided today to do a little studying on the matter and viola, you uploaded this recently! Thank you 1000 times
Hi Craig. I just want to thank you for your videos. I got my electrician license last year, your videos helped me o lot to understand electricity and codes. God bless you.
Thank you very much please keep making videos.
Thank you so much for this Craig, your entire channel is an absolute boon. I hope you can make more content. Thank you.
My man. Your channel is awesome. I am an electrician as well and do youtube and make electrical videos as well. . Your channel is very helpful and I enjoy watching your explanations. Keep them coming my friend and you now have a new sub. Great job!!!
Huge help brother, no more coming down from the ladder because my bend is 1 1/4 inches too long
I’m a plumber, and this video helped me out today. There’s a real shortage in stainless steel compression fittings where I’m from right now. So I had to make as many bends as possible(lines are for a detergent system in a train shop)
Thank you this video helped me grasp the concept of shrinkage
Craig I don't know what to say both you are amazing brother
Great job Craig
Thank you for sharing your knowledge. Great information.
I keep on forgetting how to do the calculation even after I bend it right, this is a nice video thanks.
Great job explaining 👏