Hi there! If you do not have an ethernet port then you have two options: 1) use a usb cable to connect directly to the m221 2) buy a usb to ethernet converter then connect via ethernet to the m221
Hi Antony, if the plc is new I recommend you to check the next FAQ: www.se.com/ww/en/faqs/FA235796/ If the plc is not new then you can use another software like wireshark to check the network connected to your laptop port and see the communication that you have on your port. If you do not managed to get the ip configuration try by usb cable
Thanks Juan Ariza Diaz! I am afraid I do not have a Modicon M200 with me (it is not commercialized here) For connection to the M200 i recommend you to use the mini usb rather a serial line communication. If you want to learn about how to use the serial line then you can check the video M9.1 and M9.2 of the playlist: czcams.com/play/PLFqT6GhMpgpLClSpB1iH50OUr4N4mU763.html
how can remotely via internet program upload and download in M221 ?? serval time i am trying to connect but still trouble how can solve this i need access to remotely upload the program in M221
Hi Sandeep! the first thing i would like to know is if you are able to connect via ethernet on the local network of the M221. If you can not connect then you will need to check: •The cable •The network settings on the PLC. •The network settings on your laptop. •In the ocnfiguration of the ETH port of the M221 please enable the "Programming protocol enabled". Now, if you are able to connect to the M221 on the local network then to connect remeotely to the PLC you will need to configure the router. There are different ways to do this but you must be careful about cybersecurity so i recommend you to use a different solution from Schneider like "EcoStruxure Secure Connect Advisor" (czcams.com/play/PLFqT6GhMpgpLzEfinrpJeV46wqUIu0VZD.html) or from other companies like Secomea or ewon (Talk2M)
Hi there! Using a Schneider solution you have the EcoStruxure Secure Connect: EcoStruxure Secure Connect Advisor - Training czcams.com/play/PLFqT6GhMpgpLzEfinrpJeV46wqUIu0VZD.html Otherwise using a third party like secomea will do the trick unless you want to mess around with the router that gives you ethernet.
Hi there! i need to make a video about this but the easiest is to use IOscanner as explained in the video M10.1 or M10.2. One of the M221s can be server (slave) and the other must be the client (master) so the IOscanner must be configured in one PLC. I will create a video of this in a few weeks.
Hi Hichem! I am working on that. My idea is to make an explanation using an encoder to show the HSC and a Lexium 28 using PTO to use the motion functionalities of the M221. In the meantime you can check on page 35 for HSC and page 101 for PTO (motion) of the next manual: download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000002007.05.pdf&p_Doc_Ref=EIO0000002007
@@hichemam2733 I recommend you to check the help on the software but find below the official programming manual: download.schneider-electric.com/files?p_Doc_Ref=EIO0000001360
Hi Soroso roso! There is one but without the fancy things: czcams.com/video/kZul3e6Q_Rg/video.html The configuration is for modbus serial but something similar can be done in ethernet modbus tcp, check the next video for further info: czcams.com/video/nyXspkScEjk/video.html
I dont know why, but I'm stuck at 86% at connection with Ethernet and with USB also.... :) The small 221 is in bigger project with another two 221's , one 241 and one ST6700. This problematic 221 was working good for 1 year, but after last edit of program, I must make some bad "check box" clicking.... If you have some idea please write
Hi Zivko! Usually if you are stuck at 86% you probably do not have a connection . If you are using ethernet try to ping it if that does not work try to upload/download using a sd card and that will make the trick to connect later. Let me know
@@LeTomasAHUMADA SDcard finish the job. I never pay atention on unplugging USB's from my PC and I think that was problem, unplugging the cable while trasnfering program . And PLC got stuck. Thanks for response....
Hi. Excellent work and Thank you. I have a problem with connecting modbus slave via Link 150/EGX100 to TM221. (eg. define slave Ids) i have used read and write vars. could you pls help. thanks
Hi there! I believe you have connected the ethernet port of the M221 to the EGX , correct? then the best an easy is to use the Ioscanner on the M221 to access to the devices connected to the EGX then you just need to change the unitID in the ocnfiguration, please check the videos M9.2 , M9.3 and M9.4 from the next playlist: czcams.com/play/PLFqT6GhMpgpLClSpB1iH50OUr4N4mU763.html
Hola Leandro, como estas? Te hablo de Argentina. Te queria consultar si tenes infotmacion, o se puede realizar un video para la comunicacion mediante Ethernet IP entre un M241 y un Robot Kuka
Buenas Jonatan, lamentablemente no tengo un Robot Kuka conmigo para poder "jugar" pero de todas maneras deberias ver si Kuka tienen los archivos para poder utilizarlo en Machine Expert (*.eds files) que quizas ayuden a comunicarte mas facil con el robot. De lo contrario, deberias utilizar comunication explicita con los bloques "Get_Attribute_Single"/"Set_Attribute_Single" de la siguiente libreria: product-help.schneider-electric.com/Machine%20Expert/V1.1/en/ESMEEtherNetIP/index.htm#t=ESMEEtherNetIP%2Ffront%2Ffront-1.htm
@@LeTomasAHUMADA gracias leandro. Pude solucionarlo, kuka tiene los archivos .ESD que pueden incorporarse al Repositorio DTM de Machine Expert. De todas formas, muchas gracias por responder. Se te extraña aqui en Argentina.
Hi Fatma! I am not sure how is the connection from your smartphone to the m221 and which application you are using on your smartphone to access to the M221 but if you want to connect to the plc you must know the ip address
Thank you , Excellent module.
Thanks 😊
Any solution sir, i cant connect with my ethernet adapter coz my laptop has no ethernet plug. And having issue with connection
Hi there! If you do not have an ethernet port then you have two options:
1) use a usb cable to connect directly to the m221
2) buy a usb to ethernet converter then connect via ethernet to the m221
Hi, I don't know the IP ADDRESS of the PLC, how can I conect PLC to pc by ethernet ?
Hi Antony, if the plc is new I recommend you to check the next FAQ:
www.se.com/ww/en/faqs/FA235796/
If the plc is not new then you can use another software like wireshark to check the network connected to your laptop port and see the communication that you have on your port.
If you do not managed to get the ip configuration try by usb cable
your Videos are awesomes.
Can you make a video about connection with TM200 Serial Line ?
Thanks Juan Ariza Diaz! I am afraid I do not have a Modicon M200 with me (it is not commercialized here) For connection to the M200 i recommend you to use the mini usb rather a serial line communication. If you want to learn about how to use the serial line then you can check the video M9.1 and M9.2 of the playlist: czcams.com/play/PLFqT6GhMpgpLClSpB1iH50OUr4N4mU763.html
how can remotely via internet program upload and download in M221 ??
serval time i am trying to connect but still trouble how can solve this i need access to remotely upload the program in M221
Hi Sandeep! the first thing i would like to know is if you are able to connect via ethernet on the local network of the M221. If you can not connect then you will need to check:
•The cable
•The network settings on the PLC.
•The network settings on your laptop.
•In the ocnfiguration of the ETH port of the M221 please enable the "Programming protocol enabled".
Now, if you are able to connect to the M221 on the local network then to connect remeotely to the PLC you will need to configure the router. There are different ways to do this but you must be careful about cybersecurity so i recommend you to use a different solution from Schneider like "EcoStruxure Secure Connect Advisor" (czcams.com/play/PLFqT6GhMpgpLzEfinrpJeV46wqUIu0VZD.html) or from other companies like Secomea or ewon (Talk2M)
Hello! Is there a way to remotely login to M221?
Hi there! Using a Schneider solution you have the EcoStruxure Secure Connect:
EcoStruxure Secure Connect Advisor - Training
czcams.com/play/PLFqT6GhMpgpLzEfinrpJeV46wqUIu0VZD.html
Otherwise using a third party like secomea will do the trick unless you want to mess around with the router that gives you ethernet.
greetings
How do I make an Ethernet communication between two m221s?
Hi there! i need to make a video about this but the easiest is to use IOscanner as explained in the video M10.1 or M10.2. One of the M221s can be server (slave) and the other must be the client (master) so the IOscanner must be configured in one PLC. I will create a video of this in a few weeks.
Please can you make some videos about motion control and HSC with M221 ?
Hi Hichem! I am working on that. My idea is to make an explanation using an encoder to show the HSC and a Lexium 28 using PTO to use the motion functionalities of the M221. In the meantime you can check on page 35 for HSC and page 101 for PTO (motion) of the next manual: download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000002007.05.pdf&p_Doc_Ref=EIO0000002007
@@LeTomasAHUMADA huge information, please can you share the full manual for programming M221, please
@@hichemam2733 I recommend you to check the help on the software but find below the official programming manual: download.schneider-electric.com/files?p_Doc_Ref=EIO0000001360
@@LeTomasAHUMADA Thank you so much
is there any communication between tm221 and tm221 on your channel
Hi Soroso roso! There is one but without the fancy things:
czcams.com/video/kZul3e6Q_Rg/video.html
The configuration is for modbus serial but something similar can be done in ethernet modbus tcp, check the next video for further info:
czcams.com/video/nyXspkScEjk/video.html
I dont know why, but I'm stuck at 86% at connection with Ethernet and with USB also.... :)
The small 221 is in bigger project with another two 221's , one 241 and one ST6700.
This problematic 221 was working good for 1 year, but after last edit of program, I must make some bad "check box" clicking....
If you have some idea please write
Hi Zivko! Usually if you are stuck at 86% you probably do not have a connection . If you are using ethernet try to ping it if that does not work try to upload/download using a sd card and that will make the trick to connect later. Let me know
@@LeTomasAHUMADA SDcard finish the job. I never pay atention on unplugging USB's from my PC and I think that was problem, unplugging the cable while trasnfering program . And PLC got stuck. Thanks for response....
Hi. Excellent work and Thank you. I have a problem with connecting modbus slave via Link 150/EGX100 to TM221. (eg. define slave Ids) i have used read and write vars. could you pls help. thanks
Hi there! I believe you have connected the ethernet port of the M221 to the EGX , correct? then the best an easy is to use the Ioscanner on the M221 to access to the devices connected to the EGX then you just need to change the unitID in the ocnfiguration, please check the videos M9.2 , M9.3 and M9.4 from the next playlist: czcams.com/play/PLFqT6GhMpgpLClSpB1iH50OUr4N4mU763.html
@@LeTomasAHUMADA thank you for imfomative reply.
merci
Thanks 😊
Hola Leandro, como estas?
Te hablo de Argentina.
Te queria consultar si tenes infotmacion, o se puede realizar un video para la comunicacion mediante Ethernet IP entre un M241 y un Robot Kuka
Buenas Jonatan, lamentablemente no tengo un Robot Kuka conmigo para poder "jugar" pero de todas maneras deberias ver si Kuka tienen los archivos para poder utilizarlo en Machine Expert (*.eds files) que quizas ayuden a comunicarte mas facil con el robot. De lo contrario, deberias utilizar comunication explicita con los bloques "Get_Attribute_Single"/"Set_Attribute_Single" de la siguiente libreria: product-help.schneider-electric.com/Machine%20Expert/V1.1/en/ESMEEtherNetIP/index.htm#t=ESMEEtherNetIP%2Ffront%2Ffront-1.htm
@@LeTomasAHUMADA gracias leandro.
Pude solucionarlo, kuka tiene los archivos .ESD que pueden incorporarse al Repositorio DTM de Machine Expert.
De todas formas, muchas gracias por responder.
Se te extraña aqui en Argentina.
Hi! Without static IP CAN M221 connect to smartphones remotly ?
Hi Fatma! I am not sure how is the connection from your smartphone to the m221 and which application you are using on your smartphone to access to the M221 but if you want to connect to the plc you must know the ip address