PIT BOSS PRO SERIES II 4-SERIES WOOD PELLET VERTICAL SMOKER REVIEW. 6 Months Later
Vložit
- čas přidán 9. 09. 2024
- In this video, I share my experience and go over all the PROS and CONS that I have noted over the last 6-8 months.
I hope you enjoy this video. Please feel free to let me know if you have any questions.
If you are interested in supporting the channel and are in need of some BBQ supplies, here is the link to my Amazon Storefront. I'm working to get everything you may need into my store. However, let me know if something is missing and I'll fix that real quick! Thanks and SMOKE ON!
www.amazon.com...
If you haven't, please smash the LIKE for me and I would really appreciate you as a subscriber. Thanks!!!
Come check us out at American Smoke Carnivores on Facebook. It's great food and BBQ oriented group. I'll see you there!
/ 1303161553833364
Here is a link to my Control Panel tutorial: • How to MASTER the Cont...
Here is my how to clean videos. I made 2!: • Pit Boss Pro Series Se...
• How to Clean Pit Boss ...
Here are my affiliate links to the products I used in this video:
Pit Boss Pellets: pitbossgrills....
Amazin Smoke tube: amzn.to/2WA6Ao4
B and B pellets: amzn.to/3sUAOhF
Thank you for watching my video! Please feel free to comment or make recommendations for future content. If you haven't, please smash the LIKE for me and I would really appreciate you as a subscriber. Thanks!!!
Here are some affiliate links to the equipment that I am currently using in making my content:
Studio Lighting: amzn.to/3y1TQDK
Sound/Lapel mic: amzn.to/3yVtVyA
I use TubeBuddy as a virtual assistant: https: //www.tubebuddy.com/ReviewEmpire
Camera stabilizer: amzn.to/3iWyQtO
2021 iMAC for video editing: amzn.to/3g9NZWC
Camera tripod: amzn.to/3iTGk0k
BIG Thanks for checking out my video! Help me grow my channel by hitting the LIKE and becoming a subscriber. Thanks again!!!
quick question: if a recipe called for 275 do you go to 270 or 280? Up or down five degrees?
@@pantryonlyrecipes I would probably go 280
@@TheAmericanSmoke Thanks that’s what I’ve been doing
The only problem I have with it is where the probe for the chamber temp is. It’s a design flaw to
O put it in the corner against the back wall. 40 deg difference min, from there to the middle of the chamber. Get a dial thermometer and take the logo out of the door. It’s a fantastic smoker but that is its one flaw.
There are definitely temp variations. I try to rotate my meats periodically to compensate.
Good tip on the temp gauge!
Thanks for watching and smoke on!
Have the same issue. Went from an electric chip smoker to this unit and was shocked that my baby back ribs took like 7 hours to reach temp!🤬
I really appreciate the tips and you taking the time to share with everybody. I bought mine pre-assembled and hilariously the first thing I noticed was that pulling out that Ash bin and then getting it lined back up for the threading to catch was a pain in the butt.
That ash bin is a common problem. Thanks for watching my video!
I’m posting my 1 year review in the next few days. Make sure to check it out.
If you’re not already, it would be great to have you as a subscriber.
Thanks!!!
Thank you for all these videos. I just got a Louisiana grills black series vertical smoker and have been binge watching your videos for tip and trick and for recipes. Extremely helpful.
You’re very welcome! Thanks for watching
Good video. The one con i have is the seal on my door was garbage. Was loosing a huge amount of heat and smoke through the door. I ended up buying a nomex door seal to great a good tight seal.$15 problem solved. Holds heat much better now. Even in sub zero weather.
I’ll try to remember that about the seal. I’ve had several people reach out to me with seal problems.
Thanks for sharing.
I appreciate you watching my video and for commenting.
It would be great to have you as a subscriber.
Thanks!!!
Good Day Boss, So I just picked up this unit. Had the same issue about the little smoke & thankfully I already had a smoke tube. I have to thank you for your videos. They are what helped me make my decision on what units to buy.
Thanks for the feedback! I'm glad I could help. Smoke on!!!
Great video. If you haven't done it yet, remove the bottom plates inside the unit and clean up the ash. It builds up rather quickly.
Thanks for the tip! Thanks for watching my video and for commenting. It would be great to have you as a subscriber. Thanks!!!
Hey mate. Thanks for taking the time to upload your videos. I have enjoyed all of them and have recommended to others. Keep em coming, they're invaluable!
Your awesome! I truly appreciate the feedback and the support. Thank you!
You made much more clearly than the owner's manual that the first probe port works with the controller whereas the second one does not. Very helpful, thanks. I also got mine at Lowe's on sale for $449, one heck of a deal if you ask me. Assembly wasn't too bad, I didn't throw any tools. :)
Not throwing tools is a win! I been working on a tiller all weekend, and let’s just say… there are a few new dents in the wall. Ha
Thanks for watching my video.
If you’re not already, it would be great to have you as a subscriber!
Thanks!!!
So I have figured out that if you slide the burn pot back in up until it stops, lift up and push it slides right in no problem! It doesn’t go in straight on it’s more of a push in and lift up and keep pushing till it drops in brotha! Smoke on my man great videos too!
Thanks for the tip bro! Smoke on!
Excellent video as I'm shopping for a smoker and had my eye on this!
Thanks for watching! Come over to American Smoke Carnivores on Facebook sometime.
Merry Christmas and smoke on!
This is the best review of a video I have watched on CZcams. Honest and real opinion. Seem like a down to earth kind of guy. Thinking of buying this or the Brunswick.
I appreciate you watching my video and for the feedback.
If you’re not already, it would be great to have you as a subscriber.
Thanks!!!
@@TheAmericanSmoke I subscribed as I was watching the video.
Thanks!
Thank you so much for posting these videos on this unit! They are really helpful. I've had mine for about 2 months and just love it. Cooked a wide range of meats and been happy with the results; I'm aiming to do a full Thanksgiving turkey here in November, since the cooking area is so big. I did want to make one comment on the controller - I feel these units vary in programming and I don't know why. My own unit has more heat settings than yours - it goes up by 10 degrees increments all the way to 410. I found that pretty strange, given how many recipes call for 225, etc (It's fine to just set it to 230, but seemed a wierd feature until I saw other units didn't do that). My only real complaint is that my unit has had some strange errors with the recipe settings - ex. it will skip the first step! I've been meaning to reach out to customer service to see if they had controller hardware updates or some replacement, its a bit disappointing they don't seem to have a plan for these types of issues. Anyway, keep up the good work!
Thanks for the feedback! I had one person tell me that the Australian units have been adjusted as well.
I was in Lowe’s today and noticed that the new units seem to be smaller than mine as well. Maybe there was some sort of design change as well.
Thanks for watching my video and for commenting.
Thanks for the review, helps me make up my mind! Thank You
Glad to help! Come over to American Smoke Carnivores on Facebook. Smoke on!!!
Thank you so much! Looking into getting a smoker and am overwhelmed with the choices!
Glad to help! Thanks for watching my video.
If you’re not already, it would be great to have you as a subscriber!
Thanks!!!
Great video. Our unit was just delivered yesterday and is still in the box. We had another standing unit without a window and lost heat every time I opened it. I can't wait to use this. I'm following your channel 😅
Welcome to the life! Come over to American Smoke Carnivores on Facebook sometime. It’s a great place to learn and share.
Thanks for watching and Smoke on!!!
Thx for the video I’ve been looking at this smoker for a while now and after watching a few different videos you have posted it’s helped ALOT. Thx and keep them coming.
Will do my friend! If your not, it would be great to have you as a subscriber. Thanks!
@@TheAmericanSmoke I am.
Thanks so much for the tip on the probes! Set temp to 165 in probe 1 to alert me it was time to wrap brisket in butcher paper. Could not figure out why the smoker shut down! Roll Tide !!!
I’m glad to help! I’m shooting my 1 year review this weekend.
Make sure to keep an eye out for that!
If your not already, it would be great to have you as a subscriber.
Thanks!!!
Good video...I'm thinking of buying another vertical smoker and I've been looking at these .thanks again..oh by the way,I hope that table behind you with A on it , stands for American smoke , and not roll tide...go VOLS...
Thanks for watching! Come over to American Smoke Carnivores on Facebook sometime and share your cooks. Smoke on!!!
Oh yeah, Roll Tide!!!
Australian delivered units now delivered with pid controller and adjustable in 10 degree increments from smoke right through the entire range.
That’s great to hear. Maybe I will be able to upgrade my unit soon.
Thanks for watching my video and for commenting. It would be great to have you as a subscriber. Thanks!!!
Good video. Now i bought my pro series about 3 months and im able to set my temps 10 degrees at a time. So i can set at 260, 270 ect. Also on mine you are able to drain your pellets out of the chamber from a small opening in the back of the unit. But you cant get all of them and i complain that its harder then it should be. Dont know if they changed a few things since i got mine 3 months ago. I still get better bbq out of my stick burner but this makes it easy when i dont have all day.
I’m starting to think there has been a remodel. The new units at Lowe’s look smaller as well.
How wide and tall is your chamber on the outside?
Thanks for watching my videos and for commenting. It would be great to have you as a subscriber. Thanks!!!
Just got one last week - have not done my burn in yet - but on initial test - it looks like i do *not* have the more granular 10 degree settings. Bummer. Honestly - while it would be nice - i can make due with the gaps.
I wish pitboss would be more forthcoming with what is going on with these controller differences. Hello? Pitboss? U there?
@@mikee10 @pitbossgrills
This is an old video from a while back. I have a Pro Series II 4 like yours. Pit boss sent me the new controller for it. The temp starts out quite low and increases in 10 degree bumps all the way up to high. AKA 190, 200, 210, 220 etc. Fairly easy install. Everything color matched. They didn't include a new rubber gasket so you need to save the one from the original controller. It's a plug and play install. Everything color matched. I'm 80 years old and technologiclly and mechanically incompetent and I was able to do it myself without calling on my grand kids. I think you would like it as it gives you much better control over your temps.
I’ve actually got a new control panel on the way.
@@TheAmericanSmoke Good man. I know I like mine.
@@TheAmericanSmoke What is the proceedure for getting the new panel and how much does it cost?
GREAT VIDEO!! thanks for all the info on this smoker!
Glad to help! Come over to American Smoke Carnivores. It’s a great group to share and learn in. See you in there! Smoke on!!!
Great review, thankyou
Put a cover on the smoker. I live in SD. We get wind, rain and snow. My Copperhead series 3 sits on my patio year round. I always have pellets in the hopper and keep the unit covered when not in use. Going on two years never had one single pellet problem
Thanks for sharing,my friend!
Thank you… on the fence with this unit or the 1000…
Depends on if you want to be able to sear or not. The 1000 has the sear option. You pay a couple hundred extra for that I think.
I've watched several videos of different folks reviewing these smokers. I just got mine today and assembled it myself without issues except the ashbin screw thing just WILL NOT thread in. So, I'm with you, looks like it will work fine without the screw. The one thing I find missing from all these videos is HOW to thread the meat probe--if you put it through the door, it will screw up the seal. The only other thing I can think of is dropping it down the chimney. Where do you put yours? And, why didn't Pit Boss just put a couple of holes that could be covered when not in use?
I’ve always ran mine through the door, and I’ve never had any issues. I know other people will run theirs through the smoke stack.
Thanks for watching!
What a great review!
Our neighbor loaned us his to try out…SOLD!
That’s great to hear Eric! Thanks for watching my video. I’ve also got a one-year follow up video that you should check out. It should have been at the end of this video. If you’re not already, it would be great to have you as a subscriber! Thanks
@american smoke, how would I find a replacement latch for this unit? I’ve tried everywhere!!! He bought this unit used from Lowes at half price because of the broken latch. Vice grips work great for now but…..
I’ve seen people use latches similar to these. Some people have issues with the door ceiling off so they put these above and below the factory latch.
www.amazon.com/dp/B073TXMSJY/ref=cm_sw_r_as_gl_api_gl_i_0D22XTBJHJDHTPWFBVKR?_encoding=UTF8&psc=1&linkCode=ml2&tag=reviewempir06-20
amzn.to/3AvKxjZ
I hope this helps
Very good and informative video
Thanks for watching! Smoke on!
Thank you so much
You are welcome! It would be great to have you as a subscriber.
@@TheAmericanSmoke Done. Subscribed.
@@rglaze2824 welcome to the channel my friend!
Great down to earth vid mate, thanks and appreciate it. Sold me! Cheers from Aus!
Cheers! Make sure to watch my playlist on this unit.
czcams.com/play/PL6r92n5iP7mZviHYfdR8jtcEpe8FwjP__.html
@@TheAmericanSmoke thanks mate, will do, subbed as well :) Just watching your 1 year review, bit of a change, digging the beard haha
I can’t keep a look. 🤷♂️ welcome to the channel and thanks for the support!
@@TheAmericanSmoke nothing wrong with changing it up bro, gotta keep it fresh!
@@leighhill9185 usually, at the request of the old lady. Happy wife, happy life!
I have never been able to get my ash can to go back in right since I've had it. I love my Pit Boss though,it is by far the best bang for the buck.
It’s a great piece of machinery. Thanks for watching my video and for commenting. It would be great to have you as a subscriber. Thanks!!!
I had the same issue. After I enlarged the holes in the back of the pot (where the igniter and auger are inserted) with a dremel tool, it goes in easier and isn’t as tight. Hope this helps.
@@mccreed2878 thanks for the feedback . I appreciate you watching my videos and for commenting. It would be great to have you as a subscriber.
Thanks!!!
@@TheAmericanSmoke I don’t know how cold it gets where you are but tonight it was about 40 F and when set to 350 it would only hold 310-325. Even after holding the prime button for one cycle, it would come up to 350, but settle back to low 300’s.
I love the video bro, I’ve had mine for about 6 months . The only thing I don’t like is I don’t get enough smoke that I would like to see
czcams.com/video/bhLvaWVu9Rw/video.html
czcams.com/video/IGJ_p_qJB5o/video.html
Here are two videos I have made on the subject of smoke amount.
Thanks for watching my video and for commenting. It would be great to have you as a subscriber.
Thanks!!!
Great review. Got this same smoker last week and a few of the cons you mentioned were also concerning. The fire box did not want to insert all the way in and when I finally got it in the screw on the bottom wasn't perfectly lined up and took some finagling to get it to work. Not sure why Pit Boss dozen't fix this angle issue. Also the computer dial jumping in large increments was confusing at first. I wanted to cook at 275 but had to choose 270. Seems it would be easy enough to allow for more finite control HOWEVER... Those things aside like you mentioned it's a great smoker and worth every penny.
Hello, my friend! Thanks for watching. At least your newer unit has 10 degree increments. Mine jumps straight from 250 to 300. Definitely seems that since low and slow is the name of the game, there would be 1 degree increments between 200-300. Or at least by 5.
Thanks for watching and for commenting. It would be great to have you as a subscriber, if you’re not already.
I’m about to make my 1 year review, so make sure to hit the bell.
Thanks!
Yes they have this all backwards. Same issue with mine. I ended up laying it on it's back on hand rail, loosening the screws, and nuts ,reinstalled the drawer. Pulled everything around to wear it screwed in . Then had my wife hold everything secure and tightened it all up. Works better. I wouldn't say perfect but it does work. Took about 20 minutes. When they describe this in the instructions, and its upside down the manual should have us put the tray in first and line everything up before we tighten it all.
@@MrMojabo nice! Making it work. That’s what BBQ is all about!
Thanks for commenting. It would be great to have you as a subscriber.
Thanks!!!
@@TheAmericanSmoke get ahold of pitboss customer support. when I talked to them they said if i get the pid with the temp control issues you have they will send you a new controller
I’ll try one more time I’ve done it a couple. But I have the early 2020 version and they’ve changed it since then. Not sure if they’re gonna do anything to help my bunch out. Thanks for the recommendation!
Hi all I have the 7 series vertical I’m having temp problem I set it to 250 and the pit boss control says 250 and it will heat up but the temp where the rack is a swing from 240up to 280 up and down up and down up and down Where should the water pan be over or below the pit boss thermometer
I keep all water below the protein. My thermostat is at the top of my unit.
Water should help to regulate the temp but it’s going to fluctuate. Remember, it’s not an oven. It requires burning pellets and forced air to heat so there will be changes in temp. The important thing is the average temp, and that’s what your thermostat is going to show you.
Thanks for watching my video. If your not already, it would be great to have you as a subscriber!
Thanks!!!
Hi. I'm considering this same smoker but have a question. Since we have to clean the inside of these every few cooks or so, is there a way to clean in between the inner and outer wall since that is where the smoke goes? If not, won't it eventually get clogged with smoke and moisture?
If the inner walls can be a problem, I've not gotten to that point yet. And I've smoked a lot. Great question. Thanks for watching. Smoke on!!!
Whew! I'm glad this is an old video. I thought you shaved your beard, brother Zack. There's a term for a man without a beard, "a woman".
😂 I'm a man with a beard. I'm a man without a beard. I'm a happier man if my face makes my wife happy! Smoke on brother!
@@TheAmericanSmoke Amen! Happy wife, happy life.
@@crazyhillbilly2181 that's right!
Do you dump the ash tray while you’re cooking ? Pitboss says that the unit must be cold to dump it. I’m afraid it will fill up before the food is finished during 12-15 hot smoke.
Not if I dumped It pre cook. I’ve done 14 hr cooks and been fine. These things create minimal ash. It’s always surprising.
I always make a point to clean out pre cook and everything goes fine.
I hope this helps.
Come over to American Smoke Carnivores on Facebook. Lots of good folks to learn from. I’ll see you there!
Smoke on!!!
I have a separate propane grill and a coal smoker that are old. Would this unit be a good way to replace and get the best of both worlds by purchasing this smoker?? in other words, it can do very much what a standard grill can do also correct?
Everything but direct heat cooking/searing. You can get a barrel type with a sear plate, as opposed to this vertical.
Thanks for the videos. After watching, I am going to purchase this smoker. One question… how does it smoke in winter weather?
Thanks for watching. You will enjoy the purchase.
Depends on the winter. Holds temps pretty well in 20s and 30s. May struggle in temps lower than that but you could cook at hotter temps to compensate.
Not sure if you are a subscriber or not, I feel like I may have seen your name before, but it would be great to have you.
Thanks!!!
Great video. Very informative. I was looking at getting into cooking some brisket, pulled pork, etc. Tragger was high on my list but doesn’t seem to actually smoke. Is this a good alternative? Thanks!
Burns clean. Thin blue smoke. If you want more you will need to get a smoke tube.
Here is the link to the video I did on the subject
czcams.com/video/IGJ_p_qJB5o/video.html
Thanks for watching my video.
It would be great to have you as a subscriber.
Thanks!
New subscriber from Australia . Great video 🍻Hey any update on if the controller can be re programmed to allow better temp adjustment ?
I had issues so I requested a new panel. My new panel has 10 degree temp increments. Welcome to the channel and smoke on!!!
Cheers mate
I have an offset burner at the moment . But going to get the pit boss vertical pellet smoker soon . We are always a few models behind over here in Aus 🤦♂️
Beer time 🍻🍻
Cheers!
Thanks we just got one of these and used it for the third time today and it didn’t seem like it was smoking much. There were plenty pellets and we emptied the ash.
That’s one of my most common questions. You mostly going to get a thin to light blue/grey smoke from this unit.
If you want more smoke, get a pellet tube.
Check out this video I did on the subject matter czcams.com/video/IGJ_p_qJB5o/video.html
Thanks for watching my video. If you’re not already, it would be great to have you as a subscriber!
Thanks!!!
@@TheAmericanSmoke no we opened the door and there was no smoke. It’s the 3rd time I used it and I know that only occasionally I smell smoke if I have the unit at 2:30 or 2:50 some smoke will come out the chimney and there’s always smoke when you open the door. There was no smoke. I’m not positive what went wrong with it. The first time I used it was a low and slow 24 hour smoke. The next time was only a few hours. Decent smoke both times. This time there was no smoke. I let the unit power down, then started it back up and some smoke started to happen then. The ribs were only slightly smokey, because the first two hours there was no smoke.
@@pantryonlyrecipes was the unit holding temp?
@@TheAmericanSmoke yes
@@pantryonlyrecipes what type of pellets?
Just got my Pit Boss and it seems pretty loud. Protective cover around fan was dented when we got from lowes but everything around the inside of fan looks normal... Trying to gauge just how loud should this be? Feels like i can barley talk to somebody close
That sounds loud. No pun intended!
I have made a ton of videos with mine running in the background. It’s annoying, but not overpowering.
Just based on what you have said, seems like yours may be a bit noisier than normal.
I hope this helps!
Thanks for watching my video. It would be great to have you as a subscriber!
thanks for the tips bro 👊🏾
Anytime, my bro from another mo! Thanks for watching my video and for commenting.
Make sure to sub so you can catch the next one and smash that like for me.
Let me know if you ever have any questions.
Thanks!
@@TheAmericanSmoke 👊🏾👊🏾 For sure bro
@@DysonGolf 👊
Man I wish I got the pro series. I got the one like yours but it has the controls at the bottom. Way too hot there IMO and in a bad spot. Removable burn pot is nice too
I’ve always thought that controller at the base of the chamber was a poor design
Great insight! Do you know if you can switch the Logo on the front for a analog fast read thermometer?
I have had someone put in a Teltru into that opening. I think they had to widen the hole a little. Proceed with caution
Question, will this smoker survive outside with a cover. I live in Virginia and we experience all 4 season here. So does this smoker need to be put inside a garage or indoors, or will it be safe being outside with just a cover?
Depends on your definition of safe. It’s made to be ok outside. With a cover I don’t think you would have much of a problem. If I were you I would put painters tape around the seal of the pellet hopper if your going to leave it covered and unused for a while. Do that and you should be fine.
Thanks for watching my video and for commenting.
It would be great to have you as a subscriber.
Thanks!!!
I live in Missouri and we also experience all 4 seasons. I have mine on a covered but not enclosed porch. I use the pit boss brand cover and leave pellets in it at all times since new. I have had no issues and love mine. I have also had mine for over a year now.
Do you think they can reprogram it now? Also if you program the programable meat probe to say 275 will it keep to that team fairly accurate so that you can cook at that temp?
The new units have more accurate temps. I spoke with customer service a few weeks ago and there is still nothing that can be done for my version of this unit.
The meat probe only monitors the internal temp of the meat and can shit down the heat of the chamber once temp is reached or also ramp it up if you so desire.
There is no way to set my unit at 275. I wish there was though.
Thanks for watching my video and for commenting. If you’re not already, it would be great to have you as a subscriber.
Thanks!!!
Seems the Aussie units are all having issues with reaching max temp and the probes are very inaccurate, have you had any problems with your probes
No problems here. My probe has been pretty spot on so far. I was told that the Aussie units have more accurate temperature settings for cooks though. So there is definitely a difference between there and here in The States.
Thanks for the feedback! I appreciate you watching my video and for commenting. It would be great to have you as a Subscriber. Thanks!!!!
Aussie here, looking into getting one of these. Mick, is there somewhere I can learn more about the issues people have been having?
I got this for my mother's day present to replace and old master built that had finally kicked the bucket, have used it several times since then and love it except the diverter tray doesn't divert the grease back towards the grease catch. It's running down the front and under the box and is coming out of the bottom onto the ground and in the ignition section and caught on fire once. Have you had any issues like that? If so is there a work around you might suggest? I called Pit Boss and they were super nice but didn't have a solution, I'm under 90 days so probably going to return it back to Lowes but I'm so bummed about it.
Hey Nicki! When you look at your grease plate, is the little handle looking part pointed to the inside or outside?
Very good review!
Thanks!!!
Great video. I was think about getting this unit, but I don't like the temp jumping in 25 degree increments. If you had a chance to get another smoker, which one would you get. Thanks again
They have fixed the control panel on this unit to adjust in 10 degree increments. However, the newer version of this Pro series is even more precise.
What’s the budget you looking to work with?
Would like to be below $800. What do you recommend?
All Pit Boss smokers have a 5 year warranty right out of the box.
I’ve gotten great results from my Pro Series. The Competition series is solid as well. For $800 you should be able to find a unit that suits your needs.
Thanks man. I have a Davey Crockett tailgate smoker. Had it about three years now. Love it but want something bigger like that pit boss you have. I'm really good at making jerky. Mad that tons of times. My smoked chili is damn tasty too. Smoked cream cheese is the bomb for a snack with my friends and family. Keep smoking buddy
Not sure if it was mentioned but the new update from the app it updates it. Mine goes by 10 degrees
Ok! How do I do it?
Has anyone ever used the royal oak charcoal pellets and what is your opinion. I’m new to pellet smoking.
I have. I have also used the Pit Boss version. I like both.
When I use them I mix them half and half with whatever pellets I choose.
Charcoal provides its own unique flavor.
Hey man - love the vids. Going to get one of these myself. How much height is between the racks? I like to do multiple 10-11 lb shoulders at once. Is there enough height clearance between the racks to do this?
Great job on your vids.
From the bottom is 3.5, 5.5, 5.5, and 4.5 inches. I don’t think you will have much trouble with multiple shoulders at all.
Let me know if you need any more info.
Thanks for watching my video and for commenting. It would be great to have you as a subscriber.
Thanks!!!
@@TheAmericanSmokeSubbed! I picked it up and assembled today. Hoping to do my burn in this week - in time for a "chicken legs and beer" social for the neighborhood this Friday or Saturday! Thanks for the measurements. Im coming from a Masterbuilt 30 inch electric. This thing is a beast - very excited.
@@mikee10 Glad to hear it bro! Check out my video on smoked chicken legs.
Good luck on the cook out and thanks for the SUB!
This weekend in the middle of my smoke, we got a rain storm and a clogged gutter dump all over my smoker. I started losing temp quickly, I got it covered but never could get the temp back.. i shut it off and let it sit then tried again after it stopped raining, still no luck. I let it air out all day today and tried again but nothing. I took the pellets out the best I could, but I don’t know how to clear the auger. Do I just shop vac them out or is there another way? I cleaned the temp probe as well. Help!! Thanks!
Empty your ash pot. Turn on the unit and hold the prime button for 10 sec or more and several times. After that, take out the pit again and see if anything is being pushed through.
Let me know.
@@TheAmericanSmoke so I cleaned out all the pellets and it was pretty clogged up around the auger.. so I cleaned it with a shop vac and the auger is moving, I put some new pellets in and we are getting to temp. My temp on the smoker panel is wayyyy off from my ThermoPro.. I am wondering if the prob needs replaced. I’ve gotten some prob errors in the past and I’ve cleaned it
Great video. What is your approximate pellet consumption per hour? I know it depends on temp, but just wanting to get a round about idea
Mine averages about 1 lb per hour.
I would say approximately one pound per hour on average. Obviously there are a lot of variables.
Thanks for watching my video and for commenting. It would be great to have you as a subscriber. Thanks!!!
I have this model and was wondering how open should the chimney stack be ?
Thanks for watching my video. You’re in luck! I just made a video on this subject.
czcams.com/video/s74yru46i1o/video.html
Let me know if you have any other questions. If you’re not already, it would be great to have you as a subscriber.
Thanks!!!
how can you watch if it is filled with smoke?
If the glass is clean, you food is easily viewable. This unit puts out clean light grew to almost blue smoke. It should never be dark Grey or overly cloudy inside the chamber.
Thanks for watching my video.
If you’re not already, it would be great to have you as a subscriber.
Thanks!!!
I haven't looked at other comments on this or other videos in the Pit Boss playlist. But, how does this smoker handle in cold temps if you experience those where you are?
Does it maintain temp well, do you seem to fight to keep it at the temp you want?
Traeger has their P-setting, does Pit Boss have something similar to modify the auger on/off times/speeds to help maintain temps when its cool to cold out?
Thank you for the review, do you think there is room enough for 2 more racks ?
You could get them in there, but there wouldn’t be much space to place food on them. There would also be the issue of no extra slots to hold them.
I hope this helps.
Thanks for watching my video and commenting.
It would be great to have you as a subscriber.
Thanks!
@@TheAmericanSmoke thanks !
@@TheAmericanSmoke thanks !
Wanted you to know, I watched a few of your videos while standing over unit before purchase.... the lady that helped me saw me wheeling it to check out & said, “you finally decided on one, huh” - my reply, “yes ma’am, this guy on CZcams solidified it for me. So, many thanks !
One thing I’m not getting a handle on is, the S (smoke setting). My thought would be to set temp to where it’s needed and go, which would include smoke throughout the cook. Anyway, you could help me understand the smoke setting more clearly? Is it an indecent feature lets any temp involvement?
Thanks for helping me out over here in South Carolina even though you had no idea you were helping.
Also, I subscribed and am “Smashing the Like Button”
* smoke setting: is it an independent gesture led any temp involvement.
The “S” setting is the lowest setting. Usually keeps the chamber around 130 degrees. I use it it get extra smoke flavor on my food. Sometimes , I cook on it for an hour or two before raising the chamber temp to the desired temp.
You will get smoke regardless. But not as much.
I have learned to use a smoke tube to make up the difference.
Thanks for watching my video and for commenting AND for SMASHING the LIKE button!
I’m glad I could help.
Thanks for the support my friend!
@@TheAmericanSmoke glad to do it & thanks for clearing up the S button. Yes, I ordered the smoke tube from your link earlier. I’ve been on an offset wood burner my whole life, so tomorrow’s dinner will be off the pellets - thanks & happy thanksgiving.
You’re awesome! Thank you for the support. Make sure you take some pictures of your cook and share them with me on Instagram. @theamericansmoke
Thanks!!!
Happy Thanksgiving!
I have cooled three times on this unit: garlic butter shrimp, fish and pork ribs. In all three smokes it never got any smoke flavor. I used the smoke function for thirty minutes on the pork and smoked for three hours. Zero smoke flavor. Any tips? Extremely disappointed.
What pellets are you burning?
@@TheAmericanSmoke pit boss competition blend
Is this your first smoker or have you got previous experience with another type?
4 years with an electric smoker. A small master built. Had to feed chips a lot but meat came out nice and smokey flavored. This pit boss smokes on smoke setting, thin blue smoke at 225 but absolutely no smoke flavor.
@@rodwilliams9339 have you tried a smoke tube?
The reason I asked about your experience, a lot of people say the smoke flavor is mild compared to other types of smokers. People with no prior experience have no complaints.
Here is my video I did on smoke tubes.
czcams.com/video/IGJ_p_qJB5o/video.html
For a lot of people, this closes the gap.
Thanks for watching my video. If your not already, it would be great to have you as a subscriber.
Thanks!!!
Great review!! I have always smoked on my gas grill or Weber kettle. I like my Napoleon has grill for grilling and rotisserie with IR, but wanted something for smoking specifically.
I picked up this Pit Boss today. Spend a bit of time with assembly. I can't wait to use it since I have never used a bonafide "smoker". I'll let you know of the range of my possible temp settings.
Bonus.... Lowe's had it priced on the floor for 449.00, rang up for 499.00. they honored the 449.00 😎👍
Great purchase! You probably have 10 degree increments. Sounds like you already know your way around a bbq.
Let me know if I can help though.
Thanks for watching my video. It would be great to have you as a subscriber.
Thanks!!!
I heard it doesn’t put a lot of smoke flavor in the food. Is that true?
I like the flavor of my food. I use a smoke tube for meats that I want a stronger flavor on.
I hope this helps.
thanks for watching my video and for commenting. It would be great to have you as a subscriber. Thanks!!!
If you add a gasket to the door it helps a ton! As American Smoker said smoke tubes can help a ton as well.
How many briskets do you think can fit on there
1 on each shelf. 4 shelves. Without a problem. Thanks for watching my video. It would be great to have you as a subscriber. Thanks!
Is it possible to turn the fan off while smoking with this or set it to run intermittently ?
No. The fan pushes air over the burning pellets and that is the source of the heat and smoke. The fan has to run constantly.
I hope this helps
@@TheAmericanSmoke yes... I read that some units allow you to turn the fan off and the smoke just rises naturally without the airflow.
The constant airflow has that convection effect which tends to dry meat out a bit faster.
@@931tow I have never heard of that, but I will look into it.
@@931tow I just got off the phone with Pit Boss Customer Service and the answer is still no. Other manufacturers may have something like that but not Pit Boss.
I hope this helps.
Make sure to let me know if you discover anything different.
Good looking unit, I looked at one at Lowe's today and was wondering how the glass is holding up
My glass has held up exceptionally well. I clean it as often as I can remind myself to do it. I enjoy being able to see what I’m cooking.
Thanks for watching my video and for commenting.
It would be great to have you as a subscriber.
Thanks!!!
@@TheAmericanSmoke any updates on pros or cons?
@@chrisbaima1279 Not a lot of new stuff that I don't talk about on this video. I cover everything here pretty well. I have the older model and so I don't have as many temp settings, but I think the newer models do. That is really my biggest complaint. With that being said, I still make awesome food with this unit.
I hope this helps.
Thanks for watching my video.
It would be great to have you as a subscriber.
Thanks!!!
@@TheAmericanSmoke It is also a great feature that the door simply lifts off. I just take mine off lay it flat and wipe it down so easy! I love this unit.
@@garthb2554 I agree. I took the door off in my first video on how to clean. Makes cleaning the glass a lot easier when there is a lot of build up
Wait you can't set the temp on your phone with WiFi?
You can
@@TheAmericanSmoke oh ok. So the temp setting issue is only on the control panel itself?
I'm looking at getting this model. Sucks the temps are off but seems to be across their entire line. My uncle's Louisiana vertical (same company makes both) is same 20 deg off. Needs to set 20 higher
Right. Just got to learn the pit
great post, do you prefer wood pellets over wood chip?
Hey! Depends on the unit. You’re probably aware, but you can only burn pellets in this unit.
Wood chips are going to burn faster and put out more smoke flavor in a shorter time, but over long cooks pellets are superior, in my opinion,
While you can only burn pellets in this unit, you can always use a smoke tube to get more smoke and more smoke flavor in during your cooks.
I hope this answers your question.
Thanks for watching my video and for commenting. It would be great to have you as a subscriber.
Thanks!
@@TheAmericanSmoke awesome ty, still looking great info, currently I have a Orion Grill Does a Mean Brisket, Tks again...
@@semsticks anytime
Is there an update open setting the temp on these?
There is not. However, the newer models, as told to be by my viewers, have 10 degree increments.
I spoke with Pit Boss about it last week and there is no update for the model I own.
I hope this helps.
It would be great to have you as a subscriber, if your not already.
Thanks!!!
How do you like the B&B pellets
I like them fine. Burned consistently with nice smoke flavor on the food.
I haven’t really found any that stand out as good or bad though.
Anyone use this in -20 to -40 degree Celsius I’m in northern Canada
Sounds terrible. 😂 good luck! I've never felt cold like that. Good luck.
You may get more responses in the American Smoke Carnivores group on Facebook.
Smoke on!!!
It’s been 8 months since this was posted. Do they allow reprogramming of the unit yet?
They do not. They redesigned the newer models to offer more temp control, but I don’t think there is Much hope for units like mine.
@@TheAmericanSmoke I saw this one at lowes as a lowes exclusive. I’m assuming it would still be the same model?
No. They changed the dimensions and several people have reported to me that the newer units have 10 degree temp increments.
@@TheAmericanSmoke awesome man. Thanks for getting back to me so quickly!
For sure brotha! If you’re not already, it would be great to have you as a subscriber!
Thanks!!!
Does the APP allow you to set in smaller temp increments
It does not, and as of today, there is still no replacement for the control panel on the 2021 versions of this unit. I just spoke to Pit Boss customer service. I have been told by some subs that the newer version of this unit does have more precise temp controls. However, I make awesome food on this unit.
Thanks for watching my video. It would be great to have you as a subscriber.
Thanks!!!
I just bought this Saturday at Lowe's. My control looks identical but does go up in 10deg increments. Might be a firmware upgrade now for you!
@@TheAmericanSmoke thanks subscribed. I'll be doing my first cook this weekend.
@@chrislaprete7582 Nice! It would be great to see some pictures of your food on social media.
All of my links are in the about section of this channel.
Thanks!!!
Your control panel tutorial link is a Hertz ad.......
That was weird! I replaced the link. I don’t know how that happened?!?
Thanks for watching and for letting me know.
Smoke on!!!
@@TheAmericanSmoke Great videos mate, watching for my first smoke here in Australia :)
Awesome! Smoke on!!!
Roll Tide! From North Alabama.
Roll Tide Roll my friend! Thanks for watching my video and for commenting.
It would be great to have you as a subscriber. Thanks!!!
@@TheAmericanSmoke already ahead of you! Watching your relaxing bacon video now lol
@@anthonychambers2946 ha that was just something I tried out. Trying to do story telling instead of talking. Not my best but I enjoyed the steaks. Ha thanks for the support!
@@TheAmericanSmoke I enjoyed it! I am looking at purchasing a PitBoss for my dad would like some input from you once I narrow down a couple of models if time allows you to do so.
I wish they added another higher shelf so I can hang ribs or a turkey. I tried hanging ribs and couldn’t do it
Hey Robert! What’s the benefit of hanging them? Never done it
@@TheAmericanSmoke something different. And heard you get a darker color and more smoke flavor.
@@robertwoods4457 I guess you could always split the rack. I may try that and make a video on it soon.
Thanks for watching my video and for commenting. If your not already, it would be great to have you as a subscriber.
Thanks!!!
@@TheAmericanSmoke I would say do it. Different and might be better tasting. I’ll wait for the next video. And the control board, I have the new one with 10 degrees increments and I LOVE IT. Call the app customer service and tell them the app isn’t connecting at all. They will do couple tests over the phone with you. Whatever you do tell them the app isn’t working. Once that happens they will send you a email and fill that out and 2-3 weeks later you get the new control with the 10 degrees increments and you keep the original control board as backup
I've had nothing but problems with this unit. My unit hardly ever gets enough heat to reach 250. This one has been a nightmare for me since day one.
I hate to hear that. Mine had been all but problem free. I assume you got it at Lowes? They should swap out the unit for you if yours is faulty.
@@TheAmericanSmoke oh yeah I did, they pointed me to Pit Boss tech support, their parent company Dansons, who keeps sending me new burner pots. I'm at the 2nd one replaced and it still never comes up to temperature. I've left it preheating for 2 hours before, and it just churns through pellets and never makes it up to whatever I set lol. I found your video looking for others having similar issues lol, and I'm kinda glad others aren't having trouble, but frustrated with the brand at the moment
@@EsTOEban I hope your able to get things straightened out
Try opening the vent at the top a lot more. Counterintuitive but it needs more airflow to burn pellets to create more heat.
@@TeCKis300 I won't fault you for suggesting, but I believe just about every person I've talked to has suggested having the top wide open lol. I always have it wide open
Can you put wood chips in this?
Not in the hopper as fuel. You can use certain tubes or trays if you want.
Thanks for watching and for the comment.
If you’re not already, it would be great to have you as a subscriber.
Thanks again!
Is there a vertical smoker that can handle wood chips?
I believe some of the gravity fed charcoal smokers can use chips or chunks
@@TheAmericanSmoke thanks. I found it. Masterbuilt makes it and it comes with a bad of chips.
@@TheAmericanSmoke I found one with a window on it at Home Depot. I got it.
I don’t know why my comments are not showing up I said/typed it twice!!
Hey Tony! Thanks for the info. I got an e mail saying you commented and I read it there but I haven’t been able to find it on my channel.
I appreciate the support my friend!
@@TheAmericanSmoke I just wanted you but also others to know that what your sharing, explaining, recommending etc. is accurate. Did you get or know about the heat shield being able to come out and clean under it etc.?
@Review How To so sorry, I’m just getting/seeing the reply. it Sunday afternoon. Yes, you are able to shop vacuum everything under it as well as under the shield itself. I’ve never had any issues with ash or ash on food, I know people say that but I just make sure either after a long cook(7-8) hours or (2-3) short cooks under the 6 hour timeframe I remove it and clean it all up!! Pretty easy even from a usable one arm guy!😂. It’s heavy but doable.
I have a real nice caulk for all of your cracks and gaps in your pit. Let me know.
Do tell
Good video...I'm thinking of buying another vertical smoker and I've been looking at these .thanks again..oh by the way,I hope that table behind you with A on it , stands for American smoke , and not roll tide...go VOLS...