Turned out pretty well Aluminum steering components on ebay rover.ebay.com/rover/1/711-53... Aluminum Servo Mounts and trusses rover.ebay.com/rover/1/711-53...
Good stuff. Waiting on parts to convert to FWS on my Capra. My only problem is the radio programing. Going to use s spectrum DX5C. LHS can help me with it I'm sure.
I run boca sealed ceramics on my summit in key places put them in 3 years ago.still in there.not cheap but they have psyrd for themselves a few times over by now.
Good video. Just wish you were a little more in depth on how you setup the wiring with the controller. Im looking into the same setup but i just bought a whole axle setup due to the fact it was almost $100 & buying the components to convert the rear axle is more expensive. But overall good video. Id definitely be interested in seeing a more in depth video of you have made one or decide to make one
I have all the parts and the Bastens Quadrasteer and 5 Wraiths and haven’t done a thing with it. Fell out of love with the Wraith and now into scale rigs. There all money pits but those Wraiths are famous for sucking up the money.
I can do that with the radio I have but it’s end point to end point with auto center when released. I use that mode sometimes but I like the mixing of the hacked gt3c.
Wraith is a great all round vehicle, its big fun and can take some abuse. Its ok as a crawler but in my opinion its not as good as a narrower vehicle. The Bully is a straight out crawler and its extremely capable, not much of a scene around for them in my area.
That's my wraith in the video, I love it even more with 4 wheel steer. It crawls amazing! Even before 4WS it makes a great trail truck and basher. Just like exocaged said, they are a pain to work on
Nice! I've seen some comps and the guys have something like momentary fixed rear steer (lack of better terminology). It's like they can fix the rear steer at certain epa's left or right and move the front steer freely. Have you seen or done this? Thanks in advance
Viet Tran yes I can set these radios up for that style steering. I prefer to have it mixed like it is as with this radio it’s very easy to switch steering mode.
@@viettran5438 yeah I call it momentary, similar to what real vehicles use in monster trucks and bouncers, they simply have a switch. With RC we have proportional mix controls so I just use that
@@ExocagedRC can I get a link to the controller that you sell? Or can i purchase one for you? That's already hacked and set up like this one you used in this video? Thanks. Always learn something new from your videos
Jc Tinnell I sell them but am out of stock due to shipping times for them. Shipping is horrible right now. You can try RC Addicts and ask if they will program for you.
![Axial Wraith With 4WS Takes On Unlimited Class! [North VS South Utah RC Crawlin Championship Run]](http://i.ytimg.com/vi/67bpSxCd4ak/mqdefault.jpg)
Got to love old men that play with toy trucks...They are so cool....
Get er done. Looks like a rock crawling beast now ! 💯🔥
One of the best and 1st conversions I ever done to mine about 3yrs ago! Very ncie VP stuff! I just done a standard wraith axle swap
I have 4ws on my Wraith since first day, 7 years ago, and is by far the best upgrade for this rig
Sweet! New upgrade path for my new Wraith!
Just watched made me want 4ws on mine great vid and nice job 👊💯😈
Great video awesome upgrade 4 wheel steering is awesome and tricky to get use to
Nice work! Just did this on my SMT10 but now I realise I need a better radio to really make the most of it!
gabriel dyker best radio out there is the one I used in this video.
That works so well!!
Nice job on the conversion mate 👌
Wow super good amazing mate keep it up all videos super good reminds me of my flexing with my 6x6 wow wow wow amazing
Nice truck!!
That is a bad ass build man. Ive been wanting to go 4 wheel steering for a while and axle mount my servos on my TRX-4
TBone I have videos of servo on axle with the trx truck. Look up my grimlock 3 build series.
I will man. Thank you.
Thanks for the vid bro! Get'n ready to do this to my bomber! I would like more information on the flysky and how to program!
Спасибо, посмотрел с удовольствием 👍👍👍👍👍
Solid!!!
Good stuff. Waiting on parts to convert to FWS on my Capra. My only problem is the radio programing. Going to use s spectrum DX5C. LHS can help me with it I'm sure.
Awesome still👍
Would also recommend getting the suicide switch steering... saves that steering clearance issue
I run boca sealed ceramics on my summit in key places put them in 3 years ago.still in there.not cheap but they have psyrd for themselves a few times over by now.
That's bad ass!
Good video. Just wish you were a little more in depth on how you setup the wiring with the controller. Im looking into the same setup but i just bought a whole axle setup due to the fact it was almost $100 & buying the components to convert the rear axle is more expensive. But overall good video. Id definitely be interested in seeing a more in depth video of you have made one or decide to make one
Top 😊👍🏻
People with loud exhaust ARE so cool. If it’s too loud your too old.
I just purchased the Wraith Spawn with the white body. I really like the looks. What tires are you running on your Wraith?
I have all the parts and the Bastens Quadrasteer and 5 Wraiths and haven’t done a thing with it. Fell out of love with the Wraith and now into scale rigs. There all money pits but those Wraiths are famous for sucking up the money.
can u make a video showing how you programmed the transmitter to get all those options for steering and crabbing
What is the model # for the 2.2 complete axles? Also all you did was reverse the ring & pinion gear in the diff so it turns forward?
👍👍👍
Nice video and great job!
Bdw... I want to buy one radio from you!
How can I get one?
Thanks!
💕👍
I need a crawler!!!
Do you have a video on how to put after market four link on the wraith spawn
If you use a radio with a third proportional channel you can just control the rear independently all the time, instead of having to switch modes.
I can do that with the radio I have but it’s end point to end point with auto center when released. I use that mode sometimes but I like the mixing of the hacked gt3c.
that's one squeaky boi
What type of Radio is that?
What motor looks fast. An o 3cell or 2
I run a brushed motor what would u rec for a upgraded heavy wraith
Have you converted a TRX 4 to a 4 link up front with an axle mounted servo? Im not a big fan of the 3 link and pan hard setup.
yep I sure did czcams.com/video/a-gphiz6kDc/video.html
And what if I Han another from axel off another rig I could just use that huh? Still just not sure on the wiring how you did that
I wanna do this to mine so bad. Still a little confused on the electronics side of this
Why would you use ceramic bearings on an off-road muddy vehicle
Do you have any kratos six Motors you'd sell?
Coulda talked us through the Radio set up..
I should have, I've done several videos on the 4ws radio setup with the hacked gt3c.
Have you considered stretching the wheelbase on your wraith like you did the capra ?
Nah. It’s just not needed
@@ExocagedRC i think im gonna try it. Sure did work out good on the capra.
Could you please give your opinion on Wraith in general as a crawler and also what do you think about pure crawler, like rc4wd Bully?
Wraith is a great all round vehicle, its big fun and can take some abuse. Its ok as a crawler but in my opinion its not as good as a narrower vehicle. The Bully is a straight out crawler and its extremely capable, not much of a scene around for them in my area.
That's my wraith in the video, I love it even more with 4 wheel steer. It crawls amazing! Even before 4WS it makes a great trail truck and basher. Just like exocaged said, they are a pain to work on
@@dylanconn6079 did you move the battery from the back to the front? for mine it was a night and day world of difference.
@@Nick_Parau yes added a hood hinge kit as well
Nice, but I think you need a shorter servo arm...
André Charland yeah I agree but these are the parts I was given. There is a little bit of clearance for it to work.
So it's 4ws all time? Or can you turn off rear so it's 2ws?
selectable steering modes from the transmitter so yeah you can do front steering only 4ws, crab and rear steering only if you want.
1.9 tire?
Any chance you could provide a better parts list of what you used? Your Ebay link is kinda generic... Thanks in advance!
What do you need exactly?
@@ExocagedRC sent an email, thanks!
@@ExocagedRC Just the part numbers for the Vanquish parts, thanks! Great video, thanks for posting this!
What beadlocks are those on the wraith?
Dylan said they are Ballistic wheels
They are rc4wd ballistic beadlock 2.2
@@dylanconn6079 thank you
Nice! I've seen some comps and the guys have something like momentary fixed rear steer (lack of better terminology). It's like they can fix the rear steer at certain epa's left or right and move the front steer freely. Have you seen or done this? Thanks in advance
Viet Tran yes I can set these radios up for that style steering. I prefer to have it mixed like it is as with this radio it’s very easy to switch steering mode.
Exocaged RC cool! Do you know the term for what I was asking btw? Thanks 😃
@@viettran5438 yeah I call it momentary, similar to what real vehicles use in monster trucks and bouncers, they simply have a switch. With RC we have proportional mix controls so I just use that
Use a Sanwa mt4s and with rear steer on lever, and you never go mix again.
Henning Mikkelsen nope, tried that and I like the mix better.
Ole squeeky links should be its nick name
Wildman georges rc channel George 😂
How do you set the radio up for 4ws?
I am not sure, personally I am going to use bastens quadrasteer
I have the same setup and controller. Can u tell me how the setup of the controller?
I’ve done a few 4ws setup videos on this radio.
I need a parts list for this..
In the description
The servo your putting in his mine keeps burning though that so what should I do to fix it so it doesn’t do that
You will have to get a better servo. $$$
@@ExocagedRC ok that’s what I was thinking but wasn’t 100% sure
I tried to put a steering axle on my wraith but when i hit the throttle the rear goes in reverse. What did i do wrong.
The ring gear is on the wrong side. Flip the gear.
@@ExocagedRC im trying to use a redcat gen7 front axle assembly. Doesn't the gear only go in one way
@@mattward4184 yeah only one way on that
@@ExocagedRC I'll just do what you did or buy a complete front axle. I was just trying to save some money, and use what i have
Are feont an rear diffs locked. Or open
What type of Radio is that?
Trent Cracraft hacked Flysky GT3c. I sell them.
@@ExocagedRC can I get a link to the controller that you sell? Or can i purchase one for you? That's already hacked and set up like this one you used in this video? Thanks. Always learn something new from your videos
Jc Tinnell I sell them but am out of stock due to shipping times for them. Shipping is horrible right now. You can try RC Addicts and ask if they will program for you.
@@ExocagedRC when do you expect to have more in?
Jc Tinnell I honestly don’t know. Could be a couple weeks