You are incredible at teaching. I've modeled an entire house in Sketchup and then transferred it to Layout with floorplans and various viewpoints, all within one week of opening Sketchup for the first time ever-just from watching your videos. Now I'm onto a new project, trying to model a site in Uganda where the NGO I run is setting up a water service, and once again, your videos have rapid-fired knowledge and skills into my brain. It's like I'm matrix downloading skills, that's how good your videos are.
I realize this tutorial is almost three years old and there may be newer magic available now, but this was very very helpful. I'm switching over my CAD stuff to SketchUp Pro, and about ready to model a new house I'm designing, hoping to "place" it on a geolocated terrain model. So this--along with many of your other toots--was most welcome. Thanks again! Thom Lipiczky
This offers so much opportunity for presentation of a proposed building to councils for approval purposes. Your detail is brilliant but perhaps a little more video clarity on the actual control keys for these operations would help. thanks for your great video.
Thanks for the feedback Darin - I probably should have spent a bit more time on the actual operation of the extensions - maybe an opportunity for a follow up video! Thanks again!
Awesome! Thanks I have a large piece of property with terrain and I am designing the land planning. I want to see the low areas in order to provide lakes in them.
I agree with Darin, the Joint Push Pull along with slicer is a very quick and efficient tool for creating terrain.... However, for future video presentations I would appreciate a much more direct step by step in creating a simple terrain ( hold off on the sideline comments). Then address variations of results AFTER the initial process is revealed. Thank you for the time and effort, regardless.
The answer is in this video czcams.com/video/wOl9qQXwwbw/video.html&ab_channel=TheSketchUpEssentials :) There are arrows that you can click to expand the options apparently.
This was GREAT. Seriously. Thank you- Also, I looked everywhere for the "project on plan" option but it's just nowhere to be found. I couldn't find it in additional settings or anything
I think in the new version of the extension, there's a right arrow that you have to click labeled "More options" or something on the left hand side of the toolbar. Give that a try and let me know if it helps!
I also couldn't find "project on plan" option. Its hard to see the "more options" button on the tool strip. Look for three little green arrows like this "
Justin hello! Thanks for your tutorial. I'm an oldie-but-goodie (pre-computer age) back at school at UDC. Before I knew about all this I created my own terrain in SketchUp which is ass backwards. Because I think in reality as an adult you almost never have a flat surface to build on. Thanx!
Lol - you pretty much never get to start with a completely flat surface - that's why we have to hire earthwork contractors! :) Glad you found it helpful!
Hi, I have downloaded the plug-in but the option of making the bottom flat is not there , do you have any other options to replace it ? thanks ! really like your videos!
@@alfredocarretas5640 Hello, if you open up vector push/pull option look on the left side of the bar. There is a section called "face selection" and to the left side of this is a section with arrows. Click on upper part with three arrow shaped forms and it should open up the very option you're missing.
Thanks so much for all the videos that you do. I'm a builder/owner trying to design our house, and your videos have been a huge help! I tried to enroll into your course, but it has already finished. Any chance you'll run another course? Thanks.
Hi Karin - I believe course registration will be opening up again in February(ish) - you can get on the list to get notified here - www.thesketchupessentials.com/course - thanks!
Great Videos. Seems that joint push pull no longer availabale on sketchucation , and slicer not available for 2021 version... Any other ways to do something similar as depicted here ?
Hi Justin am writing in from India. i am a beginner with sketch up want to know which free version of the application i can download and from where does the toposhaper plugin work with the free version in anticipation of your reply
Hi. Trying to follow your great instructions but I just downloaded the JOINT PUSH PULL and the "project shape on a plane button" is not there. I am using SketchUpPro 2021. Can you please tell me how to find this function?! Thanks!
I don't know if you solved this or not, but in the plugin bar, there is a button with three arrows pointing right, next to the Default Parameters button, if you click it, it opens the project shape on plane options.
Hey , great tutorial but what happened to Slice5 in the extension warehouse? Is there another slicer add-on that will allow a terrain feature to be sliced and ready to send to CNC? I am trying to decide on software and looking for the fastest method. Any input would be helpful.
You are extremely helpful friend however I too am struggling with this - i can't make the bottom of the terrain flat when using the vector push pull - it seems to be missing from the link you provided - I'm running 2018 SKUP Pro please advise?
Thank you for this video. I finally got what I was searching for after months of searching. Though I still need to figure out a lot of other things. (Proper placement of plots to the terrain, etc.) BTW, what would happen if I pressed 'Yes' to 'Outlines of adjacent spaces'? I tried that option, but it only looked the same if I pressed 'No"
I think in the newest version, there's an arrow on the left hand side of the menu bar that allows you to expand additional options. I believe you have to click that to get the project option to show up. Thanks!
You are incredible at teaching. I've modeled an entire house in Sketchup and then transferred it to Layout with floorplans and various viewpoints, all within one week of opening Sketchup for the first time ever-just from watching your videos. Now I'm onto a new project, trying to model a site in Uganda where the NGO I run is setting up a water service, and once again, your videos have rapid-fired knowledge and skills into my brain. It's like I'm matrix downloading skills, that's how good your videos are.
we are a group of students from Dr Congo. your videos help us a lot to progress in learning Sketch up! God bless you!
I realize this tutorial is almost three years old and there may be newer magic available now, but this was very very helpful. I'm switching over my CAD stuff to SketchUp Pro, and about ready to model a new house I'm designing, hoping to "place" it on a geolocated terrain model. So this--along with many of your other toots--was most welcome. Thanks again!
Thom Lipiczky
it looks good .. check this also
czcams.com/video/Uo1A5hChjes/video.html
Thanks for creating this video and others. They are a tremendous help in creating what I need to create while cutting the learning curve down to size.
👍😀
justin you are always my packup on my sketchup problems hahaha I have been watching you for more than 5 years!
thank you for taking the time to do these great tutorial
Thanks for watching!
I have been looking for this for several months but didn't even know hat it is. Thanks. Subscribed.
Thanks a lot justin, I was looking for this for a while and finally ended up with your video , thank you 🙏
This offers so much opportunity for presentation of a proposed building to councils for approval purposes. Your detail is brilliant but perhaps a little more video clarity on the actual control keys for these operations would help. thanks for your great video.
Thanks for the feedback Darin - I probably should have spent a bit more time on the actual operation of the extensions - maybe an opportunity for a follow up video! Thanks again!
So happy that I have seen this tutorial, really great help. Thank you Sir ☺
Happy to help!
Awesome! Thanks I have a large piece of property with terrain and I am designing the land planning. I want to see the low areas in order to provide lakes in them.
Thank you!
That was exactly the type of video i needed for some months!!!! Very great!
Glad you liked it!
beautiful explained, thank you so much sir
Thanks so much been trying build and open cast mine into the side of a mountain with the geology below this is gonna be a huge help.
Thanks! This video may be a bit helpful as well - czcams.com/video/BmW900ZMV70/video.html - Thanks!
Just what I was looking for. Thank you.
Glad I could help!
this is exactly something that I need in a lot easy way.
Try Rhino, it's much easier and faster to do that
Justin U are the best! happy new year!!
no doubt you are becoming a master in this ,keep it up...
Thanks very much! :)
Amazing videos! So helpful thank you! Wish i knew these when i was in the uni!!!
Glad you like them!
it looks good .. check this also
czcams.com/video/Uo1A5hChjes/video.html
Always saving the day. Thank you!
Glad it helped!
I agree with Darin, the Joint Push Pull along with slicer is a very quick and efficient tool for creating terrain.... However, for future video presentations I would appreciate a much more direct step by step in creating a simple terrain ( hold off on the sideline comments). Then address variations of results AFTER the initial process is revealed. Thank you for the time and effort, regardless.
Thank you buddy, you just made my life a whole lot easier.
👍
Awesome tutorial!
thank you for your beautiful
teaching
Thanks for watching!
why "project the shape on a plane" is not available after downloading and installing joint push pull
Have you managed to sort this out I can’t find it either
The answer is in this video czcams.com/video/wOl9qQXwwbw/video.html&ab_channel=TheSketchUpEssentials :) There are arrows that you can click to expand the options apparently.
Table parametique
hey, in the plugin setting it doesnt have that plane option , it has the thicken one
For the "more options" button on the tool strip, look for three little green arrows, "
@@jjleta Thank you
Nice, I learned a lot from you
This was GREAT. Seriously. Thank you-
Also, I looked everywhere for the "project on plan" option but it's just nowhere to be found. I couldn't find it in additional settings or anything
I think in the new version of the extension, there's a right arrow that you have to click labeled "More options" or something on the left hand side of the toolbar. Give that a try and let me know if it helps!
I also couldn't find "project on plan" option. Its hard to see the "more options" button on the tool strip.
Look for three little green arrows like this "
@@Thesketchupessentials Hey!, What the name of the new extension? Cant find the jointpushpull one on sketchup..
I couldn’t download the joint push pull extension. The other one is downloaded. Can You help?
Great! Answered a lot of questions I had about terrain modeling!
Thanks Micheal - Glad you found it helpful!
Thaaaaaaank u
U are the king of skp
Bravo bro
Hi, I'm having a bit trouble the plug-in push and pull seems not working with Sketchup I can't able to run it.
try to download this first sketchucation.com/plugin/903-libfredo6 , then go to extension manager install both of it then restart your app
thank you so much! super helpful
Glad it helped!
Thanks for this tutorial Justin ..it was very helpful !
Thanks for watching!
Justin hello! Thanks for your tutorial. I'm an oldie-but-goodie (pre-computer age) back at school at UDC. Before I knew about all this I created my own terrain in SketchUp which is ass backwards. Because I think in reality as an adult you almost never have a flat surface to build on. Thanx!
Lol - you pretty much never get to start with a completely flat surface - that's why we have to hire earthwork contractors! :) Glad you found it helpful!
I liked the scientific ad that came before your tutorial also, about digitizing feedback from the universe. It prepares you for your tutorial.
Thanks for share. I'm using Joint Push Pull LibFredo6, but it doesn't have Finishing & Border Option as yours. Any idea?
Hi, I have downloaded the plug-in but the option of making the bottom flat is not there , do you have any other options to replace it ? thanks ! really like your videos!
got this problem too, did you manage to solve this?
@@alfredocarretas5640 kinda have the same issue too
@@alfredocarretas5640 Hello, if you open up vector push/pull option look on the left side of the bar. There is a section called "face selection" and to the left side of this is a section with arrows. Click on upper part with three arrow shaped forms and it should open up the very option you're missing.
You are a great guy! I will consider patreon.
Lol - thanks very much :)
Thanks dude! Great video as always... my question is: how accurate are the google maps terrains???
it looks good .. check this also
czcams.com/video/Uo1A5hChjes/video.html
Great video
Thanks!
You are an angel!!!! Thank you so much!!!
Thanks!
Great video, thank you!
Glad you liked it!
Thanks so much for all the videos that you do. I'm a builder/owner trying to design our house, and your videos have been a huge help! I tried to enroll into your course, but it has already finished. Any chance you'll run another course? Thanks.
Hi Karin - I believe course registration will be opening up again in February(ish) - you can get on the list to get notified here - www.thesketchupessentials.com/course - thanks!
cool & really useful video Thank u so much
This was great. Very helpful. Any thoughts on the best way/extension to trace or show the road?
Great tutoral
Helpful videos, thank you
Glad you like them!
Thank you for this amazing and useful tutorial it helps a lot!
Thanks for watching!
it looks good .. check this also
czcams.com/video/Uo1A5hChjes/video.html
I just found your channel, it seems that you have very cool videos, a question i have is where the add location button is located in sketch up?
there is awesome , thanks for taking your time to do this benift tutorial
Thanks Man ... Awesome Tutorial for Topography ..
This is so cool 😭😭😭
Thank you ❤️
good tutorial
Hello, thanks for the tutorial. How can I import a bigger terrain? Should I manually intersect the frames everytime?
This man dont blink
Great thank you
Great Videos. Seems that joint push pull no longer availabale on sketchucation , and slicer not available for 2021 version... Any other ways to do something similar as depicted here ?
True
Thank you sir
Great tutorial dude!!! Thank you!
Thanks for watching!
Hi Justin
am writing in from India. i am a beginner with sketch up
want to know which free version of the application i can download and from where
does the toposhaper plugin work with the free version
in anticipation of your reply
thank u. it's really help full for me
Awesome - thanks for watching!
thanks so much, this video is very helpful. And is there any tutorial about putting buildings on this kind of terrain?
wonderful tutorial!!
Glad you liked it!
Thank you Sir. Very useful video:)
Glad it was helpful!
Útil y rápido. 100% recomendado.
😎
very informative..... thanks
nad how can i do that in the Free 2017 Make version because there i only have the Street view and not the Satelite view
Thank you so much! Your video is super detail and easy to understand!
it looks good .. check this also
czcams.com/video/Uo1A5hChjes/video.html
waw! thanks a lot man. keep it going.
Thank you, this helped me a lot!
Thanks for watching!
Does Vector Push Pull "Project on a Plane" exist on Mac Version?
Hi awesome video thanks. Would it be possible to 3D print this finished product ?
You're awesome!!!
Hi. Trying to follow your great instructions but I just downloaded the JOINT PUSH PULL and the "project shape on a plane button" is not there. I am using SketchUpPro 2021. Can you please tell me how to find this function?! Thanks!
Thank you for the video
Thanks for watching!
great one
excuse me, how to fill colour them by slope? thankyou!
I can’t find project shape on plane option even after I click the 3 arrows for more options
Don't know what to tell you - it's in there...
I don't know if you solved this or not, but in the plugin bar, there is a button with three arrows pointing right, next to the Default Parameters button, if you click it, it opens the project shape on plane options.
Hey , great tutorial but what happened to Slice5 in the extension warehouse? Is there another slicer add-on that will allow a terrain feature to be sliced and ready to send to CNC? I am trying to decide on software and looking for the fastest method. Any input would be helpful.
Is the link below the video not working for you?
Excellent thanks
Thanks!
Amazing!
How can I import data from Total station & GPS receiver?
You are extremely helpful friend however I too am struggling with this - i can't make the bottom of the terrain flat when using the vector push pull - it seems to be missing from the link you provided - I'm running 2018 SKUP Pro please advise?
There should be a right arrow button in the newer versions of the add-on that pops out more options
@@Thesketchupessentials Wow, thanks for updating us on where Fredo hid that option. I was starting to panic thinking maybe he removed it :/
Hello. When i was trying to use joinpushpull it says that license experied 30 december 2021. So now i can not use it. Any solution?
Thank you.
Is joint push pull plugin free? i managed to download it but it asks me for license
same for me. It says that license experide december 2021.... Any solution?
sory, i need help
i can find "Project the shape on a plane"
after instal 'join this pull'
thanks so much....
once you get the slices...how do you revert back to the terrain?
Hi thank you for this I just downloaded the push pull rbz file but it is not working on my skp 2021 can you help me by that
Can you add roads and utilities into the mix on this program?
Thank you for this video.
I finally got what I was searching for after months of searching. Though I still need to figure out a lot of other things. (Proper placement of plots to the terrain, etc.)
BTW, what would happen if I pressed 'Yes' to 'Outlines of adjacent spaces'? I tried that option, but it only looked the same if I pressed 'No"
it looks good .. check this also
czcams.com/video/Uo1A5hChjes/video.html
any substitute for slicer?
everything worked perfectly, but i don't see an option (project the shape on plan) on JointPushPul plugin ???
I think in the newest version, there's an arrow on the left hand side of the menu bar that allows you to expand additional options. I believe you have to click that to get the project option to show up. Thanks!
found it. thanks a lot for the reply and for those amazing training videos.
Thank you for the video! :)
:)
great stuff!
Thank you!
You da man!!!
hi, thanks for ur great tubes. slicer is working but push pull is not showing up on the sketchup after I downloaded from below pls help> i do not why
Thank You for Tutorial ! Mr. Justin Geis I hope you to make more tutorial !
Thanks very much!
is it normal that the slices are not solids? is there any way i can turn them into solids?
Thank you 🤗
Can we make this with zero spacing