NEW! Recon 40 High Performance Portable HF Antenna Coil

Sdílet
Vložit
  • čas přidán 27. 06. 2024
  • From REZ Antenna Systems, This Is The New Recon 40. A Very High Quality, Very Easy To Use Portable HF Antenna Coil For 40-10 Meters.
    Get it here:
    REZ Antenna: www.rezantenna.com
    DX Engineering: www.dxengineering.com/search/...
    ★Consider becoming a Patron @ / k8mrdradiostuff
    Follow me on Twitter. / k8mrd
    ★Links to many of the things I use can be found here:
    www.amazon.com/shop/k8mrdradi...
    As an Amazon Affiliate, I earn from qualifying purchases.
    ★★LINKS TO OTHER COOL STUFF:
    ★Save 10% off at www.bioennopower.com with Coupon Code HRT (NON AFFILIATE)
    ★Save 10% off your Coax order at ABR Industries. Code K8MRD10 at checkout.
    abrind.com/?sld=2 (affiliate)
    ★The SkyHook Portable Mast Antenna Mount (non affiliate)
    www.thehamstop.com/
    Code K8MRDRADIO for 20% off
    ★Save 5% Off At Gigaparts With Code K8MRD:
    www.gigaparts.com/nsearch/?lp...
    ★Save 10 % off Messi & Paoloni & ABR Industries Coax With Code MP10 www.gigaparts.com/nsearch/?lp...
    ★10% off Messi & Paoloni Coax
    Use code K8MRD for 10% off
    messi.it
    (USA & Canada get free shipping on orders $99 euros or more!)
    ★Signal Stuff Signal Stick Antennas:
    BNC Antenna: signalstuff.com/super-elastic...
    SMA Female Antenna: signalstuff.com/super-elastic...
    SMA Male Antenna: signalstuff.com/super-elastic...
    Signalstuff Antennas: signalstuff.com/?ref=4089
    ★$15 off most purchases over $65 at Radioddity:
    radioddity.refr.cc/mikedahlhofer
    ★All Links Are Affiliate Where Possible★
    #hamradio #hamradiotube #parksontheair
  • Věda a technologie

Komentáře • 57

  • @bradcfi2
    @bradcfi2 Před dnem +1

    From SteppIR titled, "RADIAL SYSTEMS FOR ELEVATED AND GROUND MOUNTED VERTICAL ANTENNAS" As more radials are added the impedance of the antenna drops, over perfect ground a vertical is 36 ohms. If you put up a vertical with a poor radial system you usually get a good match because the ground LOSS adds to the 36 ohms to get you at or near 50 ohms, but with a big drop in signal strength.

  • @rossbassette7518
    @rossbassette7518 Před 2 dny +4

    i have a extremely overpriced Omega Seamaster watch which keeps great time and looks really good. The watch I wear on my wrist is a $20 Casio digital watch which also keeps really good time. Both of these watches perform their primary function very well. The REZ is unique with its high quality construction along with a switch allowing you to bypass the coil. But , you have to ask yourself, is it really worth it. I also bought a similar 40M coil designed for the same purpose as the REZ, however, it was about $50, or less, with shipping

    • @chublez
      @chublez Před dnem

      All I got from that is yer a fool that doesn't wear his Seamaster. Put it on, that's the point. I can make a coil on pvc myself it won't be near as enjoyable to use. Heck for less money a DX comander doesn't really take much loger to setup and you don't need to tune between bands...not every purchase has to make the most financial sense.

  • @amnchode
    @amnchode Před 2 dny +2

    So, this is just a really nicely done, high quality, $300 Sporty Forty w/a built-in bypass switch...and correct me if I'm wrong, short of 30/40M which did use the coil, the bandwidth capability for 20-10M was all on the whip...is it not? The switch would have bypassed the coil on the high bands....
    That said, If I was running as much power as it can take, I would consider it, but the most I'm pushing is 50W portable....a WRC Mini for less than 1/6th of the price will cover that. I will admit, though, it does look really nice and extremely well built....and that whip looks like it is on point, and it *is* priced competitively....

  • @kchaney56
    @kchaney56 Před 2 dny +1

    For a dummy newbie like me just working on my license this is perfect, I have watched soo many videos and the thought of fiddling with my Antenna like they show puts me off. But just flip a switch and either lower or raise the telescoping antenna to get it all. I am all in on that. Thank you for this video. I know this antenna system costs a little more but I think we all know that if you wanna play you gotta pay, at least a little. You get what you pay for.

  • @tobyticehurst
    @tobyticehurst Před dnem

    That’s one of those antennas you would stare at whilst operating, distracting you from catching an incoming call sign 😂. “Sorry, iv got some visual QRM this end can you repeat your call”

  • @DarkShadowCustoms
    @DarkShadowCustoms Před dnem

    One of the guys in my club brought his Recon 40 to show off at Field Day. He didn't use it at Field Day, but at least I was able to see it first hand. It is definitely a neat antenna, but at the price point it will be a while before I can afford one.

  • @stahpit1971
    @stahpit1971 Před dnem

    Looks awesome so far looking forward to some testing on it

  • @rd2082
    @rd2082 Před 2 dny +1

    I talked to (REZ) Mike at Hamvention and told him the selling point for an older ham like me was not having to get down to move a coil ring up and down to tune. Standing and moving the whip up and down is much easier. Looks like you (MRD) Mike agree, thanks for the review.

    • @rezantenna
      @rezantenna Před 2 dny

      I recall this conversation! It was nice meeting you at Hamvention. 73!

  • @kchaney56
    @kchaney56 Před 2 dny +1

    Time to start saving my pennies, I want one. That switch is the bomb.

  • @TrzCharlie
    @TrzCharlie Před 2 dny

    Thanks Mike, great review brother.

  • @Ammed_KN6STX
    @Ammed_KN6STX Před 2 dny

    Great video!!!

  • @BryanDaniel42
    @BryanDaniel42 Před 5 dny

    oooh nice. i want one!

  • @ryank5tar
    @ryank5tar Před 2 dny

    that is a beautiful coil

  • @Private290
    @Private290 Před dnem

    Another great video, Mike. I truly enjoy your content and the brevity.
    Would one need a tuner with this antenna? I’m still learning.
    Thanks

    • @hamradiotube
      @hamradiotube  Před dnem

      No, you do not need a tuner. Other than on 30 meters as I demonstrated.

    • @Private290
      @Private290 Před dnem

      @@hamradiotube thank you, Mike.

  • @paulKJ5GKK
    @paulKJ5GKK Před 2 dny

    Thanks for this. Maybe they'll be at Huntsville Hamfest. Love your content.

  • @putteification
    @putteification Před dnem +3

    Wide band, low Q in the coil, low efficiency? Would like to see some field strength comparisons with some other antennas.

    • @ve6wo
      @ve6wo Před 4 hodinami

      I was thinking the same thing… whenever I hear someone say an antenna is “ridiculously wide bandwidth” my mind always translates that as meaning “low efficiency”. A 50 ohm dummy load is ridiculously wide band, but…

  • @MrSportsphoto
    @MrSportsphoto Před 2 dny

    Did you find it to work better without using the Insulating mount? I wonder if that might lower the amount of radials to use?

  • @alvarogaitan2529
    @alvarogaitan2529 Před 2 dny

    thanks Joshua terrific job great

    • @hamradiotube
      @hamradiotube  Před 2 dny +1

      You bet, Tony

    • @W5MYR
      @W5MYR Před 2 dny

      @@hamradiotube Yeah, like Leon said: thanks Steve! 🤣

  • @gabrielguzmann1ufo905

    I like 😮

  • @SurvivingTheApocalypse
    @SurvivingTheApocalypse Před 2 dny +3

    Or spend a quarter of the money and get a Mad Dog Coil 40.

  • @robmccray6360
    @robmccray6360 Před dnem

    Got it, love it. That it looks like something Blofeld would steal from the Pentagon to rule the world, doesn't hurt either.

  • @dougdukes1039
    @dougdukes1039 Před 10 hodinami

    Just curious if you could see any difference between using the radials and faraday cloth?

  • @mickeyred
    @mickeyred Před dnem

    I'd just like the whip

  • @scottgarvy
    @scottgarvy Před 2 dny +2

    But how does it actually work? 👍🏻

  • @DaDitDa
    @DaDitDa Před 2 dny

    The Recon 40 appears to be a low loss, high Q coil -- which is a good thing.

  • @slappomatthew
    @slappomatthew Před dnem

    I love this design I just wish it wasn’t so pretty and about 1/2 the price

  • @johnratcliffe6438
    @johnratcliffe6438 Před 2 dny +3

    What you don't mention, is that it's a complete pain in the arse to have to constantly get the metre out to make sure that you're resident when switching bands. That's the major drawback with this approach to antenna design; switching bands is not seamless and takes a while as you have to disconnect the radio, connect your rig expert, get it into a suitable range and then reconnect your radio again. I use a very similar system to this in the UK and I do find it a bit of a ball ache if I'm honest.

    • @shanerorko8076
      @shanerorko8076 Před 2 dny

      You don't need to do that.
      If you know roughly the height the whip needs to be, you just move it there and let the 3:1 tuner bring it in.
      Antennas don't need to be spot on, anywhere in the 3:1 range is fine.
      Yes some radios don't have an internal tuner, in that situation you're likely SOTA with a small radio, so an EFHW is going to be a better option.
      But even my FT-817 has a small tuner available, called the LDG Z-817. It can tune 10:1 so you could use it on this antenna 15m, 12m and 10m all as a 5/8 wave.

    • @johnratcliffe6438
      @johnratcliffe6438 Před 2 dny

      @@shanerorko8076 My FT891 has no tuner, so it's a pain.

    • @shanerorko8076
      @shanerorko8076 Před 2 dny

      @johnratcliffe6438 So, without a tuner, you really need to use an EFHW for a multiband antenna for portable use.
      Evil lair electronics has some good videos on how to build a really good EFHW that is bang on from 80m to 10m.

    • @amnchode
      @amnchode Před 2 dny

      @johnratcliffe6438 Who needs a meter? With my whip, I sat down and tuned each band. Once each band was tuned, I marked the whip with a Sharpie (could probably score it, as well....or both). Is it perfect...no, ground conditions will always change that. However, it is close enough in the ballpark to not hurt the radio, and then you can just tweak it from there, if needed...

    • @shanerorko8076
      @shanerorko8076 Před 2 dny

      @amnchode yea exactly, too many people get caught up on perfect SWR, which isn't needed.
      The only thing you should be concerned about is if the SWR is causing the radio to drop its power.
      If this is happening, you need to bring the radio in to a SWR so the protection circuit stops tripping.
      Like I said, if you have a 3:1 internal to the radio, close enough is good enough, the power will still radiate, then you can just get the dimensions close, so you get the radiation pattern you want.

  • @willian.direction6740
    @willian.direction6740 Před dnem +1

    Mike if I was to do a park in my mobile could that antenna be screwed in the bull bar intead of the tripod.

    • @hamradiotube
      @hamradiotube  Před dnem

      I don't know what a bull bar is but sure.

    • @willian.direction6740
      @willian.direction6740 Před dnem

      @@hamradiotube Bull bar/ Roo Bar Aussie term for the bar on the front of the vehicle where Spotlights or antennas can be mounted. We mostly hit roaming Bulls or Kangaroos on our outback roads hence the name.

    • @hamradiotube
      @hamradiotube  Před dnem

      @@willian.direction6740ahh ok. So long as you can get a good ground to the car so it can act as the ground plane it shouldn’t be a problem.

  • @ST1300Jim
    @ST1300Jim Před dnem +1

    That amount of bandwidth with a 40m coil loaded vertical makes me think it’s lossy. Any on-the-air performance testing, especially with comparison to a reference antenna? A dummy load has great bandwidth and SWR, but lousy performance.

  • @jmollo55
    @jmollo55 Před 2 dny

    Looking at the Tarheel Designs dipole i have a small village lot with no place to hang antennas .. looking to mount it on a roof tower ...

    • @hamradiotube
      @hamradiotube  Před 2 dny +1

      That'd definitely be an option. I've never used that but I saw it at Hamcation.

    • @jmollo55
      @jmollo55 Před 2 dny

      Yea i saw it on your page along with few other guys .. hoping someone does a video .. probably have to wait till next year to get it being on limited income it takes me time to acquire the things to play with​@@hamradiotube

  • @AzPauly
    @AzPauly Před dnem +1

    Looks sweet, but at $540 for the whole kit and kaboodle, it's not gonna happen..for me..

  • @jptrade8575
    @jptrade8575 Před dnem

    If you're a ham you can build your own. The design has been around for over 40 years. Its as basic as it gets. A tapped coil.

  • @truckinguy92
    @truckinguy92 Před dnem

    Although it’s very well constructed, at $300 it’s a tough pill to swallow. With today’s economy the way it is, it’s way out of a lot people’s budgets. It’s a nice paid promotional review though.

    • @hamradiotube
      @hamradiotube  Před 3 hodinami

      Paid? When did I get paid? As I said in the video, this antenna was loaned to me. Maybe pay attention? See what I did there?

  • @TheTdub
    @TheTdub Před 2 dny

    The whip kinda looks like a knock off of an Alpha Antenna whip. Which are absolutely BAD @SS!

  • @Martin_PA0KGB
    @Martin_PA0KGB Před 2 dny

    out of stock.

  • @PendejoRyan
    @PendejoRyan Před dnem

    Sweet
    Georgia
    Brown