『模型時間』 1/24 LB-WORKS R35 ADVAN GT-R AOSHIMA LBWK full build
Vložit
- čas přidán 30. 12. 2021
- 趕在2021最後一天 快把這台完成 不然就會拖到明年了～
這台的紅色水貼 要找到跟他相近的紅色 我試了好多種紅色 才找到跟水貼差不多的紅色（modo M-003 )
底漆是先噴白色補土 這樣紅色才會比較接近
再來就是寬體部分 車體需要切割 然後再裝上寬體套件
個人覺得 這台車滿難做的～
祝大家 新年快樂～ - Zábava
Very impressive model. Beautiful paint and decal work.
The decals on this are quite interesting. Turned out great. Really liked your choices of music for the video.
Thanks for your comment and watching
鏡面做旳好漂亮，台灣人很少發佈這類型的分享，期待你的新作品
謝謝您的支持喔～
作品很帥！很喜歡看這種類型的~繼續加油~
感謝您的支持喔～ 會繼續持續更新作品的😀
what a nice job!!
Congratulations
You put quite the shine on the Beast.👍😊
真的是很猛
Outstanding job sir it looks amazing 🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆
Wow, very nice 🔥👍👍👍
Amazing work.
thanks～😄
Thank you !! This is NICE NICE NICE
Nice job !
超帥
謝謝😃
Very awesome work, I may have to find that kit and build it on my channel, Keep up the great work my friend.
Thank you for your support~
@@le091888 Your very welcome my friend.
Awesome bro 👏🏻👏🏻👏🏻👏🏻
thanks😄
👏👏👏👏👏👏
功力深厚的作品，想請教後面車殼組裝部分用的膠水是田宮綠蓋? 這樣不會傷害已經拋光好的漆面嗎?
您好～會傷到漆面～所以要盡量找不明顯的地方上膠～
這個鏡面 很厲害考慮出個教學嗎XD?
下次有機會的話～再來拍個教學～感謝留言
Good video.About red color paint , what is the number color and brand to match the decal, thanks
Hello, the red I used is modo-M003, I hope it helps you~
What paint did you use for the red?
7:20 как знакомо. С криками бл@ть продолжаем работу! 😄👍
This a beautiful car, but I need a kit with an engine and this company doesn't provide one.
請問田宮ts系列紅色有比較接近的嗎 我沒有噴槍😅
您試看看正紅色吧 我對ts 系列的漆比較沒有研究
Can you post the tools you used? Thanks
Especially the glue applicator.
Glue applicator is the included one with tamiya extra thin plastic glue, hope that helps ya
问一下这款模型如果不上色直接做的话请问可以吗因为我是一个新手打算入手这款r35
不上色直接做 會變成後車廂 是黑色～所以這款我並不建議 可能要直接做的車款是 單色車款會比較好～
@@le091888 我个人觉得后车厢黑的还不错看
Heyy buddy
How did you make those decals?????
Hello~ This kit itself comes with stickers~ Just follow the instructions~
請問是用那隻紅和黑？
紅色我是選modo M-003跟水貼顏色比較接近 如果您是選擇不貼水貼 直接噴漆彩繪的話,那紅色就挑你喜歡的即可
黑色就一般黑色,因為到最後也是要透過拋光 所以黑色就是一般黑～
你好 想請問 內裝毛毛的材質 是買什麼來製作的
我是去美術社買絨布貼紙來代替的～
@@le091888 謝謝你 感覺超好用 想再問一個問題 拋光打磨的那個頭是用什麼頭🙇🏻♂️🙇🏻♂️謝謝
那個頭 是我用汽車打蠟的大塊海綿 剪成小塊來用在模型拋光～不然買專用的海綿 實在是太貴了 而且要一直買⋯
@@le091888 了解 感謝你的指點 最近也在製作一台Gtr 獲益良多謝謝
請問11分24秒那個清潔劑是哪種的
您好～我是使用廁所磁磚防黴的清潔劑 就類似漂白水～
@@le091888 了解～謝謝
13:20 carbon fiber water decal?
I think it's just a glossy black that the light is doing something weird with. Tamiya makes carbon fiber water slide sheets if you're looking for some
how to remove the sticker ?
I'm assuming you mean the decals? Just cut them out from the sheet and put them in some warm water for 15-20 seconds. Pull them out and they should easily slide right off the paper
what type of glue at 27:00
TAMIYA 87038
@@le091888 why not use tamiya craft bond
@@le091888 TAMIYA 87038 Dissolve Color or not ? thanks.
@@BrightTranscender Will dissolve the color ~ use with care
@@BrightTranscender Because I don't have this kind of glue~ So I use ready-made glue😅
1:15 is tehre a reason u have to cut the model body like pictures and not just come like that? kinda weird pretty sure u dont buy that model to not put the wide body on it
It's actually very simple~ You can buy the same car model yourself~ and then see if you need to cut the car body~
Hi, ı liked your job, well done and ı have a question. How do you vanish the fingerprints on your model ı saw at 30.05 - 30.16 ,thanks for your help.
First of all, thank you for watching~The fingerprint part is what I accidentally left at the end~Just wipe it clean and it will be restored
@@le091888 thanks for tip.