Rovan Q-Baja 1/5 GAS RC - Break In and First Start Like a Professional
Vložit
- čas přidán 2. 12. 2020
- 🔥All Gas RC Models here - alnk.to/2QuS7X3
🔥ALL Nitro Models here - alnk.to/4qJE4zs
👍Get all your RC Hobby needs here - alnk.to/hstLdoI
😎Become A Channel Member and Help Me Make Nitro Great Again -
/ @hybrid32494
🔥New Savage GT-6 Here - alnk.to/cb0Ze3D
🔥HPI Savage XL 3-SPEED - alnk.to/3J4C9r3
👍LRP 28 ENGINE $158 (direct fit for Savage) - alnk.to/9xhCwqM
⛽️Great VP Nitro Fuel 25% Nitro Quart - alnk.to/44U86Z0
6V Hump Battery for most RCs - amzn.to/3ZnWvGM
👍🏻 Support the channel by Becoming a Patreon Member and get featured
in the videos.Consider supporting the channel for awesome Perks: 👍🏻 / hybrid32494
This shorty ROVAN BAJA is about 4 inches shorter than a basic baja chassis, and this really help it wheelie. This model comes with a 29CC motor, a huge tuned pipe and metal rear bumper and wheelie bar. Lets do the first start and all the required checks and procedures for any new gas RC. We do things right on this channel, so you won't run into issues down the line or right away. I install a new Flysky GT5 radio, Mix fuel and oil the filter, pus alot more.
Amsoil Dominator 2-stroke oil - amzn.to/36yj2XZ
VENOM 6V 5000 MAH Battery for Bajas - amzn.to/2VuRGLU
Flysky GT5 Radio Used In this Video - amzn.to/36CTjxD
Flysky BS6 spare receivers - amzn.to/3g9P13S
Other 1/5 Gas Rovans for sale - www.banggood.com/custlink/K3G...
Support the Nitrogang with Becoming a Patreon Member and get featured
in the videos.
/ hybrid32494 - Auta a dopravní prostředky
6 channels baby !!! Great video as usual- it was good that you showed part of the break in procedure - most people don’t do this properly
Another engine fired up into life. Excellent
Absolutely my favorite baja in my collection is my shorty Q great video 👍
The Rcmaxgang approves 1/5 gas videos! 2nd watchin now while im in traffic!
good job man! and always with a cool soundtrack!
hey bro!! I'm glad you appreciated that sound I choose, I want you to know that if it was unto me and CZcams allow it, all my music would be Linkin park, bullet for my Valentine and avenged sevenfold at all time!!. But the copyrighting capitalists on here are forcing me to only use tiny bits of some music and overwrite it with other noise to trick the audio filters.
Very cool ,sounds great looks awesome!
Congratulations on the new rig
Good vid brotha 🤙🏼👌🏼 gasgang is real!
Nice looking Baja! Great video.
Hey Brap Mom Marion!! This one is not mine, but I do get to run with it once in a while. I recoded this video a while ago, it was still warm outside for the most part, I forgot to publish this, lol.
that was a professional first start! haha nice video bud
Awesome vid bro, you're more patient than me around kids messing with us. I think I would have plowed his little truck good so he learned not to mess with 5TH SCALE BABY! LOL.
🔥ROVAN⚙️PIMP🔥
Hi D: mitri, sweeeeeet video, I love new rc’s, i just got a new rc kit today, the Tamiya tt02 Audi v8 Touring car and I can’t wait to get it built. I’m going to make the suspension a bit taller like the rally chassis. I hope you’re friend has a lot of enjoyment from his shorty Rovan. 😎👍👍👍🇬🇧
Excellent video lots of good info on new car prep and start up thumbs up on Amsoil 👍😎
if you know what I'm talking about. We millennials know. Also love the way how you're interacting with kids... Dope, very dope
Awesome video as always I have tried that oil in a bunch of different stuff and noticed it didn't run very good and anything less than 50:1 was ok
Professional nitro king!
Very cool gas car 👍
Keep up the good work brother
Hi there,I’m looking at getting into these rc’s,with the 6 channel radio gear you show on video about the fail safe feature,is this built in or do you need additional parts?
That’s nice!
Just a FYI tip , like Botajell I heat taped our gas tanks 💪🏾💯 Keep Brapp’n Bro💪🏾💯
Awesome Brother Dan has these for sale at Rovan Rc for 569.99 and free shipping and if you dont live in NY ya wont pay tax either!!! Its great deal with or with out tax!! We all know I hate taxes and def raised taxes!!! Brother I hope that non combustible 3n1 oil aint going in that new engine haha! Thats a no no lol!! Time to finish watching!
Really like this truck can't go wrong with the price and upgraded parts it's a win win situation thinking of buying two of them one buggy and trucks 🙏🙏🙏🇯🇲🇯🇲🇯🇲💪💪💪
Cool great video
Great videos brotha! I know your familiar with the 1/5 game and I’m about to step up with the big boys from smaller scales. What brand/style would you recommend to go with to get the best bang for your buck? Thanks!
Just purchased the symmetrical steering set up for my kingmotor t1000 baja. I'm excited to see the difference. I see that comes with it already. Cool
hey bro! YES! Let me know how you like that system on the T1000 baja. The symmetrical steering on this SHORY chassis is unique, I've never seen a regular length chassis run with that steering system .
Will do that, like the videos man.
@@hybrid32494 hey I got the symmetrical steering kit on the king motor t1000. It turned out way better on movement and durability so far. I have been through many wiper arm kits, aluminium,carbon, and even bought a stock hpi one and I wore them all out quickly. This feels way nicer and tightened everything up like I was expecting. Very happy with purchase.
Hey bro that Rovan Q is sweet. I don't blame you I run my Baja and nitro's rich. Last thing I want to do is blow up the engines. Those all terrain wheel are great have them also.
That 29cc is poppin like its hott son!! Sounding nice and crispy that 29 will run for a loooong time if takin care of as with all the Rovan engines! Even The Rcmaxgang here has a few Rovans and Rovan engine's we love them over here for bashing yo! Pumped for your next movie, "Thor's Hammer" gonna be a box office hit!!!😆😉🤙👍👊💥💨💨💨
The wheelie bar which is my favorite
what do you think about the losi baja rey 1/10 bnd
When you gonna review the HSP 94763 short course bro? Me and my friend ordered and on its way bro... Nitro gang more to come ... 🤘🤘
If I’m not mistaken for mixing the fuel on that jug on the oil part I just fill oil on the partition mark that has number 1 and for the gas I fill it to the partition line on top
Thanks for the upload. What about octane number? is 91 enough?
It's not breaking-in like a pro.
It's breaking in *by* a pro!
Gotta say that for that amount of money, the buggy looks very well designed and finished!
The short wheelbase also makes it look much nicer!
Rovan really should make a 1/8 scale replica of this buggy (nitro offcourse)!
We were doing shorty conversions on the original hpi bajas 15 years ago.
hey man! I've never seen a converted shorty HPI Baja, but I imagine all you had to do with trim some of the chassis? What was the main element that made it a shorter chassis? I'm curious.
Wassup nitrogang sick baja
hey bro! thanks! My buddy got this baja, it's not mine, I was just helping him instal the radio and doing the break-in properly! NItrogang helps out the crew, you know.
We don't have enough table you know what I'm saying 😂
Great video! Man those electrics were trying to break your stuff! You should have got the Redcat Mad Max and destroyed them!
hey bro! Yup, did you see the damn electrics, they always trying to get me! I was to joking. They jealous of my exhaust!! LOL.
Have you installed fromt chassis protector, I just bought same car and was wondering is it necessary
So, i just got a baja and i just want to know what to do when i get it in detail. Thanks in Advance!
Got question for you. I live in Indonesia and recently got into rc cars. I got 1/10 WLtoys brushed buggy, HSP brushless buggy and sort course truck, all good fun. Partially watching you and others I am getting the gas bug. I have good mechanical skills (ex engineer now flying for living). I was considering VRX short course truck or the blue buggy V2, which seems to have better components. Getting nitro fuel and parts here is kind of pain. So now I am looking at this Rovan buggy, I like the 2cycle engine, pre mix...... I drive like an old man (51) and I need not to brake shit as it is hard to get parts this Rovan might be the way to go. I think the long wheel base would be a better choice, more stable, don't actually want to do wheelies and such. I like the tank up front, bit more weight on front wheels, better steering???? Any input will be appreciated. If you could put a short list of must have parts upgrades that would be great. What physical and mah battery pack do I need? Thx in advance.
parts are easy to find for the rovans steering alrt could be allitle better but no it doesn't wheelie it is loud upgrades depends on how u drive like are u ganna street drive it or track like dirt or so
I hope u respond to this but what’s good for nitro and gas radios. The fly sky gt3b, fly sky fs-gt5,or dumbo x4.
hey dude! I highly recommend the FLysky GT5, I;ve converted most of my GT3-B radios systems to the GT5. here is the cheapest link for it thru amazon. amzn.to/3aH2P4y. It's exceptionally easy to bind, easy to set failsafe and the receivers have built in gyros. Trust me, the GT5 is the way to go.
When u mix the oil with the fuel aren't u suppose to put 25 in 1 in 1-gallon of fuel right?
Dude are you from jersey my man? I love the energy I subbed to ya had lots of good laughs in this video gotta watch the rest of yer channel now.
hey my dude! how you doing, and welcome to the channel, glad to have you here! Im in Staten Island, but often times go on trips to Jersey to buy used RCs. Hope you enjoy the other vids, you gotta check out the newer ones too btw.
@@hybrid32494 I'll be sure to bud keep up the videos and the good energy man.
Hey bro what kind of battery do you use for the receiver stuff on the losi petrol rc cars?
hey man! You can run any 6V NIMH RC pack for any 1/5 gas RC. Most losi owners will run a higher quality 7.2 LIFE pack or just a 2S lipo that will fit. If you have modern high voltage servos you can run a 2S lipo in there.
Aye boss we’re did you get the gas and oil that’s needed for the Rc car? Just bought me one and realize it didn’t come with either of those things lol great vid as well man 💯🔥
Nitrogang loves wheelie monsters! I wanna see that mgt 8.0 run, I am thinking of trying to get one for christmas. Honestly I wish all nitros had primers on the carb built in and a killswitch for the engine, it would make it so much easier.
The thing is that you can’t kill a glow plug since it’s literally heated from the flame of the last stroke. Spark plugs however use electricity from the ignition coil so those can be killed.
@@nitrogas5719 yeah the glow plug is always lit, I was thinking more like a carb plugger or something
Killer RC makes a kill switch for nitro's. It cuts off fuel flow. It's called Bumble Bee Nitro Kill Switch. I don't know how well it works, but you can always do a search . It cost $53.99. Check it out. Hope that helps.
@@ivegotgasrcbyvinny3025 yeah I did my own where I had a 3d printed servo mount and it pinhced the fuel line. Never really liked it because it took a while to shut off.
Hi there
I’m JOSE I have a LOSI Aftershock what type of motor comes with it came with 427 cc nitro engine
Eu sou Daniel moro em Boston e tenho um MCD 1/5 gás 34.cc
Have these Rovans gotten ALOT more expensive and rare? I cant find them Banggood anymore and on Aliexpress they cost around 1000€ now.
Hey I'm sorry if this is a bad question but I'm going to get one what gas is best once again I'm sorry for the dumb question 😔
Premium fuel 91 to 92 octane without ethanol
I’m between buying the rovan or the jato 3.3 u have both what do u think?
hey bro! Good question! They're both completely different, you know. For a rovan I highly recommend the regular 30CC model, not this shorty model. The Rovan is great to buy brand new and learn the whole gas hobby (exactly like I have). The jato is something to buy used for cheaper, there's plenty for sale usually.
Doesn’t 32:1 seems a bit lean? I run 28:1
LMAO, TOM CRUISE... THOSE ELECTRICS CAYNT HURTYA! THEY WERE OUT 4 BLOOD, I PROLLY WOULDNT HAV DROVE THERE VERY LONG EITHER! AWESOME THO BRO! CANT WAIT TO SEE YA TOP THIS WITH WUTEVER U GOT GOIN ON TOMORO LOL. SEE YA THERE!
Hi should I buy a 30 cc like yours or a 36 cc
Catching up on some old nitrogang videos.
Hey bro! Should i use this Amsoil Dominator oil in my rovan baja 5b(25:1)? Is it the proper oil for this engine? I just want to know for sure 😁
Hey dude. Yes you can mix a 25:1 ratio for any 1/5 gas motor. Its usually the common recommended ratio. After a few tanks you could try 30:1 for a bit leaner tune. Keep an eye on the spark plug too. It can tell u lots of clues about the mix. I currently run 32:1 btw.
Thanks!
How do you mix 25:1 on that fuel jug you used?
hey dude, the included ROVAN fuel can has lines where you fill it up with oil in the small partition and then with fuel in the larger partition, then you mix it together, it's already labeled for a 25:1 ratio. I have other vids on my channel where I mixed fuel with more precision than I did here.
Hoe many heat cycles u have to do until your able to go full throttle?
hey buddy! In general I usually do 8 heat cycles. Some people dont even break these gas engines in and they also seem to be fine. The oringal HPI Baja manual said the break-in was not necessary. IN my opinion you should do some heat cycles because it cannot hurt and build some good confidence.
You about made me spit out my coffee when you said, "Days Of Thunder!"😜 Great video!
Did you say awhile back that you bought a DJI Mavic Mini? How is it doing? I now have one of those and the newer Mini 2 and the Mini 2 is a lot better, in my opinion!
Anyhow, it has been awhile and I'm glad to see your videos again. Take care and Merry Christmas!🎅🎄👍
hey my dude! ahha, Glad you liked that "days of thunder reference". Yes, I still have the Mavic mini, and you're 100% right the newer mini 2 is significantly better. Im actually selling mine on ebay right now, I have since purchased the $800 dollar mavic air 2 (still not opened). The main feature I need is the tracking mode from the air 2 model, other than that the mini is awesome. OCCUSYNC technology is the BOMB!!!
I really wanted the MA2 but decided to get the Mini2 and a new 27" 4k monitor. Gotta watch the budget sometimes when you're old and on a broke income!
I'll keep the MM. The main reason I got the Mini2 was the Occusync but I also like the zoom and some other stuff including the 4k. I'm hoping to be a little more active when the weather gets better again but I'll be watching more. Take care My Friend!👌👍🎅🎄
Hey man do you have to tune these losi petrol cars?????
hey buddy! Yes, you need to tune all gas and nitro RCs, but it's significantly easier with the gas models. All 1/5 scale gas RCs are daily easy to tune, it comes down to getting the IDLE speed correctly set with the low speed needle. Watch some O'NEIL Brother's vids on tuning them, thats how I learned myself.
My man! Did you notice the new bajas sold on banggood come with a 3 channel remote with a gyro receiver?? I wonder if it is any good
hey dude! I just looked. and yes, you're right. Good value for the money for sure.
@@hybrid32494 I bought one in May. Wish I would of waited till now
@@kgm5512 it’s a 6 channel radio now I ordered one 3 weeks ago it should come in a week or early but I ant wait for it
Awsome
thank my dude!! happy to see you here..
Do you have any videos for the the Traxxas jato ?
hey buddy! what's up, thanks for watching. I sure do have a coupe jato vids, it's one of my fav nitros, here is a link.czcams.com/video/_LlfglyNHI8/video.html
Ha! Yeah! Comparing nitro to 1/5! No comparison! You know where I’m going with that.
Hey bro. Lol. U got that right!! That was a built in nitrogang trick question lol. The guy answered correctly, he passed.
@@hybrid32494 😊😉
What's your opinion on the shorty Q Baja and the standard 5B chassis what one do you think is best to start with for a beginner with 5th scale RC gas that is I just got into Nitro and I know Nitro which definitely has its frustrations which I'm dealing with now I've only had my volcano s30 Redcat Nitro for less than a month and I already have the engine off of it trying to see if the connecting rod has been bent during pull start my one way bearing casing cracked and only put a scuff on my connecting rod but I'm having trouble getting it started I have fuel good fuel and good glow plugs and I even have the same Dynamite glow plug igniter as you the Lipo which works well but I haven't gotten the vehicle started since I replace the one way bearing what is your suggestion on the two different Roven gas RCs should I get the mini or regular size chassis as a starter I just want a RC with a real combustion engine on it to drive around while I slowly get used to the difficulties of nitro I'm not giving up on Nitro I just want to take my time to get used to it I've only had it a month or less sorry for the long comment
hey dude! I highly recommend you get the basic BAJA, not the shorty. other than preference to the aesthetics there is no advantage to the shorty at all, it's actually more expensive, slower, harder to drive at speeds and more specialized. I started with a ROVAN BAJA 30CC model, that's what you need. IF you're 100% into wheelies, then the shorty is for you, personally I don't care about wheelies at all. I prefer solid straight line handling and symmetry down the line with a planted feel. You know.
@@hybrid32494 yes I agree with you on that that is the only reason I was interested in the mini Q I think if I'm going to start with a gas buggy I might as well have the full size chassis yes I love doing wheelies but it seems like the mini Q is a one-trick Pony when it comes to that from what I've noticed the full size chassis seems to be the way to go I just wanted your honest opinion on it since I'm just starting out and I've worked on a lot of dirt bikes and four wheelers to the two stroke is more in my wheelhouse for maintenance than a Nitro I am not giving up on Nitro like I said before just want a combustion engine that's easier to work on and deal with and maintenance while I learn more about my nitro cars do you have any interest in buying a vintage GS Storm 8 scale buggy if not would you be interested in getting it back in driving condition for me
@@hybrid32494 I know you do a few videos on getting cars back on the road for people and I would love to have the king of the Nitro gang work on it for me if you had the time or interest in doing so it is in pretty good condition for a twenty-year-old used Nitro the engine is seized from sitting but I do believe it is worth getting back together it was a $600 Nitro about 18 to 20 years it has an OS motor on it I'm not sure if it's a 28 or not the only thing it needs is a new gas lid for the tank and a pen replaced in the front differential other than that it's a really nice buggy
@@TreySlayPlay23 BTW, the shorty is only about 3-4 inches shorter than the regular baja, it just looks much shorter, also a marketing thing. Its not significantly shorter, you know. And I'm basically up to my head in old nitro RCs right now bro, I can't take on another project. I got tons of other stuff to deal with, I recommend just selling that old nitro you got on eBay, now is the time to sell. Get the 30CC baja for 450 and you will be happy! Easy and reliable, and much faster than the shorty.
@@hybrid32494 I completely understand bro I figured I would ask because I don't have the time to mess with it I only paid $30 for it LOL that and I got a HPI firestorm the electric version but it is in mint condition other than the old Chrome coming off the plastic Wheels everything is in great condition I bought both of them for $65 and the dude paid a thousand or a little over a thousand for both of them when he bought them I know you're a busy person but I would at least like to send you pictures when you have free time I figured I got a good deal on both of them I was driving the HPI electric the very next day after purchase
How long have your motors lasted? I'd consider buying one but the motor losing compression after a few runs kind of turns me off a bit
hey buddy! I can honestly tell you that these gas motors will run for years! This not like a nitro engine at all, they can run for long periods of time and hold a consistent low idle without a problem . Long as you run proper 32:1 ratio oil with good quality gasoline you will not have any issues. I have other gas rc vids, and absolutely no issues.
@@hybrid32494 awesome thank you for the reply. I'm glad you haven't had any issues with yours. I may end up purchasing one, any particular weak points? Issues finding replacement parts?
@@gabebinkley1300 I highly recommend you look for a regular baja, not the shorty as seen in this video. Check out my channel for many good BAJA videos I've done over the years. In fact I even tower a tree with one, and no problems. These motors are very solid and will not piss you off, lol! You really dont need any upgrades and parts for the basic BAJA chassis are extremely abundant..
I'm tom Cruise baby, where was tmaxx Tony at the end there lol😅
what's up bro!! LOL!! T-Maxx Tony was too busy lifting weights, he got no time to RC lately.
Just killing the ball game bro, haha awesome love your work mate champion
Should get K&N oil filter spray!!!
hey buddy! Yes, good point, I am aware of that oil and I should be getting sooner or later, you're totally right.
Hello can you send me a link to buy that wheelie bar
I wanted 1 but was scared i couldn't put a big motor on it?
hey dude! to be honest with you the stock 29 CC in this thing is very adequate. IT pulls wheelies as it is already.
Have one of these cars in the same colour. Thing is mental, constant wheel stands.
hey my dude! what's up! Welcome to my channel, I think you're new to my channel, so let me welcome you bro! I tend to remember all the comments and who I have responded too. Thanks for watching. BTW I've got a coupe other dope 1/5 gas RCs, check them out, I can guarantee you they will blow you away, I've driven them over myself, towed a tree, cooked bacon and ate it from one of them. Im serious.
Thanks for the welcome and the response. I've only had mine for a few a few weeks and absolutely love it. Wanting to add some weight to the front to keep the front wheels on the ground for drag racing
@@matty8462 you can adjust your rear suspension spring rate to help it squat and hook up and this helps a lot with wheelies.. But you will need to increase the spring rate when you go back to rough terrain and jumps. This is the same principle for real life drag racing so give it a try. ;)
@@txdbstx8967 awesome, cheers mate
Can somebody plz help and tell me how long does the stock battery last on a full charge the one which comes with the car.
hey buddy! I've tested numerous BAJA's with various rated capacity RX batteries. I can tell you that the standard 2500-3000 MAHH pack from rovan and Redcat last about 3 hours on a full charge. But let me tell you, it's best practice to always charge your pack before you run, no matter what, and also run a kill-switch that will monitor the pack voltage.
@@hybrid32494 thank u so much 3 hours is a lot
@@hybrid32494 could u tell for 2000 plz
the name is SC6V2000mAh Battery
@@gamingwithsid9531 I would estimate a safe operating time of 2-2.5 hours. But once again trust me, it's best practice to charge before each run. BTW there is also a matter of how hard you're running the electric system, some people use lights, some just idle alot, some are always moving servos while racing, you know. My estimates are for a mix of all these conditions, which are my typical running styles.
@@hybrid32494 ok thank u so much i will use mine for like 1.5 hours just to be on the safe side your content really is amazing try taking thoe rovan to the desert sometime
Hey Hybrid! That looks like a very nice short body 1/5 gas buggy with great up grades and features! I don't get why more of these 1/5 scales don't come with the three channel Radio equipment and kill switch already installed on the RTR Models these days! Great break-in Procedure by the Gas Gang D!😉😎💪
hey dude! The only RC I am aware of that comes with a factory installed Kill-Switch is my Primal MT truck. I am 100% with you, people would gladly pay a little more for their gas RCs if they came with kill-switches. Anyway, I have a video coming out soon where I am installing a Killer Bee Kill switch onto a Redcat Rampage. After my last RC runaway and crash I have learned my lesson, never run without a kill-switch.
@@hybrid32494 Cool! I figured you thought the same way! I'll be watching for that one for sure!😉😎💪
This shorty or the 30Dn buggy? Thanks
hey buddy! how you doing! This is the Shorty Baja! I recently got a 30DNT buggy, check it out in my newer vids.
@@hybrid32494 i been watching your vids i can't decide with one to buy 30dnt £700 or the shorty £460? With 1 is better? Plus im looking for a good budget around £200/£300. Respect from London uk
Didn't you sell the black Baja?
Video was recorded a while back
Where do you find that oil? I can not find any online or at my local part store
Hey bro. I put an amazon link to it in the video description. Its the cheapest u will find on amazon. Check the link, only 1 left in stock right now. Get on it bro!
@@hybrid32494 thanks bro!!
Go to your gas station the probably have some oils you can use
@@rc_teo_nade_216 ight thanks dude
Always was on the redline but everybody using amsoil 😂 now I want some amsoil
Wrap that pipe under the tank and wrap the tank that's an issue with my shorty
hey bro! Yes, I'm aware of that being a concern for these things, you're totally right. So far I have been keeping an eye on those parts and they seem fine. IT could be a good long term investment though, so I may do it eventually. This RC is my buddy's, it's not mine, but it's something that should be checked frequently.
Niiiiice
hey my dude! Thanks for watching!
Does anybody have a 1/10 3s or 1/8 6s motor that you don't need?
@@Intelcroa Thanks For Looking!
I'd be pissed if some jealous kids were trying to ram into a brand new Baja
hey bro! I know, that was quite unexpected. But I gotta say this is common for all kids when they go RC. It's as if they believe it's a an RC demolition derby. Last time I drove with kids on a track my Jato wound up needing the entire gearbox halves replaces. Now I only drive large scale RCs here, because they can't mess with them.
I don’t think the kids with them lil RCs would of wanted to slam into my rampage MT that is full aluminum 😂😂😂😂😂😂😂
@@erdoganog no offense but, aluminum just makes the cars heavier, and break more stuff, for example if you hit a tree, you will break the plastic a arm, if you hit with aluminum, you will rip the hinge pins out of the plastic gearbox
@@nitrogas5719 its only worth it to upgrade certain stuff to alu. and definitely not the whole car
I cannot find another video on this shorty? this is the break in video ... where is the bashing videos? I want to hear this puppy singing while doing some wheelies! LoL!
hey man! Unfortunately this is not my own RC, therefore a follow-up bashing video was not made. This was the only opportunity I had for this RC. Let me just say, compared to the standard length baja, this has super direct steering, but seems to also have less top end, in my opinion.
coco jambo ? that’s 90s song
that's right my dude!! Why not listen to some classic good music from the 90's you know! Gotta have fun one way or another.
I have the Red 1 & my Wife has the Green 1 both can be seen on my channel 💪🏾💯
🏎🔥💨💨💨 #Nitrogang & #BrappCity
Um you were driving a gas rc and had music playing hmm
Still a thumbs up video
hey my dude!! LOL. I knew you were going to dislike the music, haha. I didn't do much driving in this video because this was just a break in type video, you know. But did you see my Redcat rampage towards the end?? That thing drifts so great, that video will be soon.
hybrid32494 is the small Baja yours or were you breaking it in for someone else
Dude I would be pissed if someone kept ramming me, I would have probably said screw it and rammed the smaller cars with the 1/5 lol
🤣😂 and I just bought the GT5
Wheelie machine
Why you get from bangood? Rovan is cheaper
😆
Bang good didn't set the carb settings....lol
hey buddy!! Hold on, What do you mean? I said a few times the setting were pretty good from the factory for this thing. I only had to lower the Low Speed Needle 1/8 of a turn to get a low idle, but for the first start they were ideal. You want it a little higher when you start it, otherwise you will just need to raise the throttle trim even more.
Dame BRO u blocked me🧐🤣
What's all these first starts just drive it like you stole it of course run it in but WTF
hey buddy! On this channel I do things the right way, I don't start and run things for views! There are plenty of other people who bash these, and you never see them again! This is the proper way of breaking in a gas motor as recommended by the manufacturers!
you soft Dmitri if you blocked me
You’re not blocked my dude. I do not block anybody, that would be too easy. Only talbot and his goons support such practices, its your right as a viewer to comment, good or bad, does not matter. Nitrogang is about freedom my bro!!
@@hybrid32494 my bad I thought bc I joke and say ELECTRIC BABY u blocked me u Kno it's all love
@@hybrid32494 say no more bro,my first nitro coming soon let's see if nitro can convert me from ELECTRIC lol be safe brother🤜🤛
Good luck man! U kno im here to help a fellow rc brother out, even if its an electric, but i prefer that nitro baby!! Lol. As you know.
@@hybrid32494 brap brap lol ELECTRIC BABY
are you guys drunk ?
This dude tries so hard....ends up sounding...CORNY AS HELL!!!!
TAKE DOWN YOUR 2 YEAR OLD VIDEO ON A STUPID SAFE. IT IS TERRIBLE INFORMATIOM AND DANGEROUS. IT IS IRRESPONSIBLE OF YOU TO LEABE IT UP.
yes, you're right. I will be converting to an ammo can. Thank you!. I will also Private/ or Unlist this video. Thank you for reminding me, I honestly forgot to do this. You can check within an hour, if you want proof, the video will be unlisted, or private at that point. I accept being wrong and acknowledge if a better idea comes to mind, this is a better idea.
lol love this dude
Thsnk you bro! I love u too!
@@hybrid32494 brother, your approach to these videos and your attitude is hella fkn hilarious 😂🤣😂 much love from Cali…. looking to get my first 1/5 scale gas rc truck or baja…. as an semi-entry level guy which one is the best bang for buck?!? i seen king motor, redcat, the rampage, but rovan has really got my attention…. whaddya think bro? (subbed)
@@kipshnizzle8340 let me give you the most Sickening Great advice bro for your great question. I highly recommend a Rovan or King Motors Baja, they are basically the same thing. If you go back to my other 1/5 scale vids you will see my very first 30CC Rovan Baja, that thing did not piss me off. I towed a XMASS tree with it also, and nothing broke. Also check out the 30 Degree North Buggies, I have one, and for a 4WD chassis that value cannot be beat either.. The redcoats are good also, but much slower due to their low RPM motors.
@@hybrid32494 fuck yea thank u bro
just what i needed to hear.
I clicked on the link, but since that video is two years old, it is not available on Bing good anymore. If you have a new link that I can purchase the Roven from that would help out your channel. Please list the link and I will pull the trigger.
@@hybrid32494 bro i bought it brother, cant wait…. amsol 2 and 93 octane on standby
hopin to get that biatch in a couple weeks
5 mph wow
Hello, thanks for checking out this video, unfortunately, I am not a person trying to kill the gas car in this video like most other jerks predominantly in the United Kingdom. He can kill anything including some fish and chips, I am going to currently kill myself a burrito, now what do you think about?