Just found your latest vid on how to do it! Mate you’re a bloody legend! I really wanted the Explorer Pro but was bummed I couldn’t have the swivel seat like the FishPro! I’m so stoked you’ve shared this mod. Can’t thank you enough
Parts with Numbers needed for Swivel Seat. You will also want to order a rear mat to match your watercraft which is specific to your watercraft model. 1 x ANCHORAGE_SEAT UP PAINTED (269003673) 1 x SUPPORT_SEAT CTRL. PAINTED (269003674) 1 x RING_WEAR UP (269003634) 4 x HEXAGONAL CAP SCREW M6 X 25 (250000978) 1 x FLOAT LWR MOLDED (269003694) 1 x FLOAT UP MOLDED (269003756) 1 x RING_WEAR LWR ASSY (291005700) 1 x BLACK DART (293730006) 1 x ANCHORAGE_SEAT LWR PAINT (291005708) 4 x SOCKET SCREW, M8 X 75 RIE (250001197) 4 x FLAT WASHER 8 MM, STAINLESS (234082600) 4 x HEX. ELASTIC NUT M8, BRASS (232581200) 1 x PLATE_RETAINING (291005641) 2 x FLANGED HEX. SCREW M6.81 X 30 (243163060) 1 x COVER_ACCESS ASSY (291005669) 1 x SEAL (293200124) 1 x CAP_PANEL (291005698)
Thanks, I had plans to do this in June but with inventory shortages it took 6 months to get the parts I needed. I can't wait until summer and actually try it out.
Hi mate, I just ordered everything you mentioned in the parts list. I’d really really appreciate a vid on how to convert it if that’s ok? I have a brand new Explorer Pro 170, and this has made me so excited!!!!
In July 2022 it cost me right at $600.00 for all the parts. I am planning on doing an install video at some point but I want to say it was around 20 minutes from start to finish.
Hey i was just wondering if you could measure the mounting holes on the bottom of the seat for the anchorage part I have a GTI SE and the seat rear handle assy is slightly different than the GTX line it has mounting holes already but I'm not sure if they are the same hole distance. thank you in advance!! Other than that everything else should be the same I'm hoping after comparing everything else for the Access Cover Ass'y.
Hi Jon, I was finally able to measure the holes for you and the measurements I got are 5-5/16" left to right and 5-5/8" top to bottom. I did measure on center from the top of my bolts so the measurements might be off a 1/6" maybe. Hope that helps.
You sir. As everyone else stated, you are amazing. Thank you. When I get the chance to measure mine I will reply if they are the same mounting holes as the gtx. Hopefully, so there won't be any other mods needed. Have you used it yet how's she working for ya?
It’s a game changer! So comfortable to be able to sit up higher and move around to be able to hit those spots you want with your lure just by swiveling the seat. I was wondering how it would be without the back rest that the fish pro has but honestly, I didn’t feel the need for a backrest.
You should be able to see my comment for all the parts you will need minus the rear mat. If you tell me your model, color and year of watercraft I can give you the part number you will need for the mat. I do plan to do an install video within the next couple months.
@@VAriders I am not affiliated with nor sponsored by Greenhulk but this is the website I use because it's a one stop shop for the most part and they have just about everything I need. www.4-tecperformance.com/ It appears that the metallic sage and liquid titanium models for 2022 both have the same grey matt on the back. If you have a different color, let me know but it looks like you will need part number (291005860) LAVA GREY, REAR MAT
The seat bracket attaches to the bottom of the seat with 4 screws. You need an upper seat anchorage (269003673) and 4 Hexagonal cap screws M6 X 25 (250000978) Hope that answers your question.
Just got mine in November. I wanted the 300 so I went with the limited. I figured we can still fish off the limited just did not have the live well which is ok. Do you happened to the rest of the part numbers for the whole conversion? Did everything come from Sea Doo? Thanks again!
@@VAriders I am going to create a list of part numbers for you guys that I used. All parts are factory from Seadoo but I ordered mine through Greenhulk.
www.4-tecperformance.com/ is where I ordered from. You will need to pull up your year and model on their website to verify the part numbers but if you use my descriptions for my build, you can figure out what part numbers you will need for yours.
Just found your latest vid on how to do it! Mate you’re a bloody legend! I really wanted the Explorer Pro but was bummed I couldn’t have the swivel seat like the FishPro! I’m so stoked you’ve shared this mod. Can’t thank you enough
wanted to follow up and see if you were able to get this done and what you think about it?
Parts with Numbers needed for Swivel Seat. You will also want to order a rear mat to match your watercraft which is specific to your watercraft model.
1 x ANCHORAGE_SEAT UP PAINTED (269003673)
1 x SUPPORT_SEAT CTRL. PAINTED (269003674)
1 x RING_WEAR UP (269003634)
4 x HEXAGONAL CAP SCREW M6 X 25 (250000978)
1 x FLOAT LWR MOLDED (269003694)
1 x FLOAT UP MOLDED (269003756)
1 x RING_WEAR LWR ASSY (291005700)
1 x BLACK DART (293730006)
1 x ANCHORAGE_SEAT LWR PAINT (291005708)
4 x SOCKET SCREW, M8 X 75 RIE (250001197)
4 x FLAT WASHER 8 MM, STAINLESS (234082600)
4 x HEX. ELASTIC NUT M8, BRASS (232581200)
1 x PLATE_RETAINING (291005641)
2 x FLANGED HEX. SCREW M6.81 X 30 (243163060)
1 x COVER_ACCESS ASSY (291005669)
1 x SEAL (293200124)
1 x CAP_PANEL (291005698)
❤
Super nice I was thinking about this for a while. Thanks for sharing
This is a great idea!.
Thanks, I had plans to do this in June but with inventory shortages it took 6 months to get the parts I needed. I can't wait until summer and actually try it out.
Great stuff
That is a great idea. Better patent it before SkiDo figures it out.👍
Hi mate, I just ordered everything you mentioned in the parts list. I’d really really appreciate a vid on how to convert it if that’s ok?
I have a brand new Explorer Pro 170, and this has made me so excited!!!!
I have a brand new explorer as well how did the install go?
Need you a deck extension though.
I thought about that but there is quite a lot involved in doing the deck extension to only gain about another foot of deck space wasn't worth it.
Amazing, thanks for sharing, how much did you end up spending for parts and how long did you spend doing the modifications ?
In July 2022 it cost me right at $600.00 for all the parts. I am planning on doing an install video at some point but I want to say it was around 20 minutes from start to finish.
Outstanding, I will be following, thanks man !
Awesome
Hey i was just wondering if you could measure the mounting holes on the bottom of the seat for the anchorage part I have a GTI SE and the seat rear handle assy is slightly different than the GTX line it has mounting holes already but I'm not sure if they are the same hole distance.
thank you in advance!! Other than that everything else should be the same I'm hoping after comparing everything else for the Access Cover Ass'y.
It will be a couple weeks before I can get you the measurements but will check it when I can.
Hi Jon, I was finally able to measure the holes for you and the measurements I got are 5-5/16" left to right and 5-5/8" top to bottom. I did measure on center from the top of my bolts so the measurements might be off a 1/6" maybe. Hope that helps.
You sir. As everyone else stated, you are amazing. Thank you. When I get the chance to measure mine I will reply if they are the same mounting holes as the gtx. Hopefully, so there won't be any other mods needed. Have you used it yet how's she working for ya?
It’s a game changer! So comfortable to be able to sit up higher and move around to be able to hit those spots you want with your lure just by swiveling the seat. I was wondering how it would be without the back rest that the fish pro has but honestly, I didn’t feel the need for a backrest.
Can you please list the part numbers needed. Thank you. I have been thinking about this for some time.
Will do.
Did you get a complete parts list? Also, are you planning on doing an install video?
You should be able to see my comment for all the parts you will need minus the rear mat. If you tell me your model, color and year of watercraft I can give you the part number you will need for the mat. I do plan to do an install video within the next couple months.
@@astfwp Thanks I see it now. I have a 2022 GTX limited in the sage green.
@@VAriders I am not affiliated with nor sponsored by Greenhulk but this is the website I use because it's a one stop shop for the most part and they have just about everything I need. www.4-tecperformance.com/ It appears that the metallic sage and liquid titanium models for 2022 both have the same grey matt on the back. If you have a different color, let me know but it looks like you will need part number (291005860) LAVA GREY, REAR MAT
@@astfwp thank you
How did you install the bracket to your rear seat and what part did you use? Thanks in advance
The seat bracket attaches to the bottom of the seat with 4 screws. You need an upper seat anchorage (269003673) and 4 Hexagonal cap screws M6 X 25 (250000978) Hope that answers your question.
@@astfwp thank you!
Just got mine in November. I wanted the 300 so I went with the limited. I figured we can still fish off the limited just did not have the live well which is ok. Do you happened to the rest of the part numbers for the whole conversion? Did everything come from Sea Doo? Thanks again!
@@VAriders I am going to create a list of part numbers for you guys that I used. All parts are factory from Seadoo but I ordered mine through Greenhulk.
@@astfwp thank you
I want GTX 300 Explorer Pro
Hello can this on gtx 230 and if so can you send me the parts list and where to get the kit
www.4-tecperformance.com/
is where I ordered from. You will need to pull up your year and model on their website to verify the part numbers but if you use my descriptions for my build, you can figure out what part numbers you will need for yours.