This is an incredibly helpful video, as other comments mention there is not much out there regarding material creation, particularly in D5. Also, your careful breakdown of each step is what separates this tutorial from many others. Creators of tutorial videos often miss steps that may only take a few seconds to explain but are critical for the correct result. Please keep this up.
THANK YOU! Always see videos about renderings that focus on composition and stuff and rarely about the technical stuff like material management. Imo this stuff is much harder to figure out and has a bigger impact.
Thank you so much for this, it's incredibly difficult to find good tutorial videos for rendering programs or any architectural / design program for that matter. I've been driving myself crazy using D5 x ArchiCAD as the syncing of materials between the two is frustratingly finnicky sometimes. I love D5 (it's way better than the built in CineWare engine ArchiCAD has), but it can be a pain :P You explained everything very nicely, and as an interior design student who is new to these programs - I appreciate it! You have a new subscriber :)
The problem is that you would want a rendering program that simplifies your life, not complicates it. Here you have to invert a lot of images and last but not least, own photoshop and know how to use it, in short, a never-ending circle.
Hey there ! Can you tell me what’s the best way to render Hi res images on SketchUp with Vray in minutes? What are the beat options as far as computer equipment goes?
The biggest problem of D5 is hardware requirements. I am able to run Twinmotion (with all of its crushes), Enscape, modern games on mid settings but D5 just does not run at all because my graphics adapter is not supported.
It does not. Because using it will invert the whole image direction, so the green channel will be corrected but the other channels will be opposite and incorrect
The local material thumbnails is not showing for me (9:00). Why? Doing a rendering every time to load the thumbnail from the disk folder is very cumbersome and uncool.
I hope you will continue to train creative architecture, practical application step by step👍✔ And upload all what need tutorials ✔💙 #for_support_u.. continue to train creative architecture , on ✔mega urban projects, practical application step by step👍✔ And upload all-what need tuto
Base color let you choose a solid color while the base color map let you import a map. Note that the the base color will be multiply on top of the base color map as well so you can use them both at the same time if you'd like
@@ArchitectureInspirations Ah, I see. The switch for base color and base color map is only for the first field "color"! Not for those following fields Specular, Roughness below. That was why I wonder.
This is an incredibly helpful video, as other comments mention there is not much out there regarding material creation, particularly in D5. Also, your careful breakdown of each step is what separates this tutorial from many others. Creators of tutorial videos often miss steps that may only take a few seconds to explain but are critical for the correct result. Please keep this up.
Thank youu!
THANK YOU! Always see videos about renderings that focus on composition and stuff and rarely about the technical stuff like material management.
Imo this stuff is much harder to figure out and has a bigger impact.
You're welcome! I 100% agree with that, composition and style wouldn't get you far if you haven't mastered the essentials like materials and lighting
this is the blender guru of D5 right here
D5 and Revit is the future!
They are all what an architect needs
I have been waiting for a tutorial like this for ages! I use D5 at work constantly and this is mega helpful!
Would love to see an exterior render in D5 with details from you. Loved this video!
Just a SUPER important lesson!!! This is just a bomb!!!
Glad you find it useful!
the most useful and specific tutorial. Thank you so much !
You're welcome!
Thank you so much for this, it's incredibly difficult to find good tutorial videos for rendering programs or any architectural / design program for that matter. I've been driving myself crazy using D5 x ArchiCAD as the syncing of materials between the two is frustratingly finnicky sometimes. I love D5 (it's way better than the built in CineWare engine ArchiCAD has), but it can be a pain :P
You explained everything very nicely, and as an interior design student who is new to these programs - I appreciate it! You have a new subscriber :)
I'm glad you find it useful!
Great tutorial! We want more D5 tutorials
Amazing video man! So well explained and detailed, very helpful! Thank you!
Installed, everything works, thanks!
Absolutely brilliant. Thank you.
The problem is that you would want a rendering program that simplifies your life, not complicates it. Here you have to invert a lot of images and last but not least, own photoshop and know how to use it, in short, a never-ending circle.
True, should be making your life easier~ Now tell this to your boss. :)
tks so much, D5 save my life
It's so nice to watch your videos bro , thanks 👍
great tutorial, thank you!!!
Waiting for your d5 render full tutorial just like 1 hr lumion tutorial.
ITS GREAT, THANKS VERY MUCH
Quá hay anh ạ!
Cám ơn e nhiều!
thanks bro 😍
You're welcome!
Ottimo Tutorial
Awsome video as always!! which one is better, D5 or unreal engine?
...sehr gut!
can you make a video like this for Unreal?
Unreal engine 5.1
really grateful _/\_
Nice Video! Ist there an Option for UV randomizing?
Cool
Hey there ! Can you tell me what’s the best way to render Hi res images on SketchUp with Vray in minutes? What are the beat options as far as computer equipment goes?
I don't understand the difference between specular and clear coat, both are for shine, isn't it the same to use only specular?
Hi, why is my Height Tab not showing in the MAP section? Thank you. More power!
Whether to go for d5 or lumion
The biggest problem of D5 is hardware requirements. I am able to run Twinmotion (with all of its crushes), Enscape, modern games on mid settings but D5 just does not run at all because my graphics adapter is not supported.
Hello sir ,which is better jpeg or png images . what is the difference of these two when using as a material in rendering .TIA
PNG has transparency while JPEG does not
is there a way to add your own stains/watermarks in D5 as in Enscape
in d5 2.4 the normal map slot has an option to INVERTED map... it works to only click this option instead of inverting the green channel in Photoshop?
It does not. Because using it will invert the whole image direction, so the green channel will be corrected but the other channels will be opposite and incorrect
The local material thumbnails is not showing for me (9:00). Why? Doing a rendering every time to load the thumbnail from the disk folder is very cumbersome and uncool.
I hope you will continue to train creative architecture, practical application step by step👍✔ And upload all what need tutorials ✔💙 #for_support_u..
continue to train creative architecture , on ✔mega urban projects, practical application step by step👍✔ And upload all-what need tuto
What is the difference between Base Color and Base Color Map?
Base color let you choose a solid color while the base color map let you import a map. Note that the the base color will be multiply on top of the base color map as well so you can use them both at the same time if you'd like
@@ArchitectureInspirations Ah, I see. The switch for base color and base color map is only for the first field "color"! Not for those following fields Specular, Roughness below. That was why I wonder.
please please please we need how to create realistic light in D5 please
Why where is no height parametrs in d5 render 2024
Is it also available for free d5 ?
1st
bras basah
noob will make such a big difference between the bricks and seams - as you did
I don't get it🤣 you care to explain in a better way?