Hello Dennis, thank you very much for your suggestion for improvement. We are constantly working to improve our products and services. Best regards, your Häfele Team
The most important part that this demo fails to address is how once the draw is in place, do you remove/ lift the draw off of its side sliders! What is the release trick?
Hello, thank you for pointing this out! We will make sure to include this step in future videos. In the meantime, feel free to contact our experts if you need any further help! Feel free to contact us at info@haefele.de. Best regards, Your Häfele Team
@@HaefeleDE Since you liked my feedback, here is some more. I did indeed contact a member of you company’s technical team and asked several questions including how to detach the front. He replied to just my 1st question- how to detach the front. So I again asked my other questions with the same kind of response, and so it went on until I was so exasperated that I have sort satisfaction elsewhere. My last communication to him was similar to this, and I pointed out that had he replied In Full to my initial query, it would not only have been much more helpful but would have been far less expensive to your company in respect to his time spent on dealing with me. I told him to “pass my feedback “ to his line manager, but I very much doubt he will have done that.
Hallo Mister Mischa, wir haben Deine Anfrage geprüft, doch leider ist es nicht möglich den Auszugsweg der Matrix Box Beschläge einzustellen. Möglicherweise kannst Du den Auszugsweg mit einem externen Stopper (Holzklotz, o.ä.) begrenzen. Wir hoffen Du findest eine passende Lösung. Melde dich gerne bei weiteren Fragen direkt bei deinem Häfele Fachberater oder telefonisch unter +49(0) 7452/95-1211. Liebe Grüße vom Häfele Onlineteam
this is very cool , but place the dimension for the clips on drawers , interior bottoms and back piece ... just saying
Hello Dennis,
thank you very much for your suggestion for improvement.
We are constantly working to improve our products and services.
Best regards,
your Häfele Team
The most important part that this demo fails to address is how once the draw is in place, do you remove/ lift the draw off of its side sliders! What is the release trick?
Hello, thank you for pointing this out! We will make sure to include this step in future videos. In the meantime, feel free to contact our experts if you need any further help! Feel free to contact us at info@haefele.de.
Best regards,
Your Häfele Team
@@HaefeleDE Since you liked my feedback, here is some more. I did indeed contact a member of you company’s technical team and asked several questions including how to detach the front. He replied to just my 1st question- how to detach the front. So I again asked my other questions with the same kind of response, and so it went on until I was so exasperated that I have sort satisfaction elsewhere. My last communication to him was similar to this, and I pointed out that had he replied In Full to my initial query, it would not only have been much more helpful but would have been far less expensive to your company in respect to his time spent on dealing with me. I told him to “pass my feedback “ to his line manager, but I very much doubt he will have done that.
Hilfe! Kann ich irgendwo an den Schienen einstellen, wie weit sich die Schublade heraus ziehen lässt? Gibt es da irgendwo einen Stopper? Danke.
Hallo Mister Mischa,
wir haben Deine Anfrage geprüft, doch leider ist es nicht möglich den Auszugsweg der Matrix Box Beschläge einzustellen. Möglicherweise kannst Du den Auszugsweg mit einem externen Stopper (Holzklotz, o.ä.) begrenzen. Wir hoffen Du findest eine passende Lösung. Melde dich gerne bei weiteren Fragen direkt bei deinem Häfele Fachberater oder telefonisch unter +49(0) 7452/95-1211. Liebe Grüße vom Häfele Onlineteam
Cool
Fain
무빗 관련된 설치 동영상합니다.