I just hope that Volvo holds together for awhile. This machine here gave me 13 good years! And would have been alot longer if I had known about its other issues. But alas, I cant change the past. But I can move forward.
@@MXguy95 Sounds like it had a pretty good run. The Volvo l90d seemed like it had a lot of life left in the video, I have faith it will last. You know far better than me, though.
or have a SKPYE confab with MUSTIE1 on your YT channel and see what he thinks of your situation, My GOD you guys could resurrect any thing MECH with minimal cash outlay..................
You should put a Detroit in it we had a loader that had a cat in it lasted forever but when it went out we found a 453 Detroit out of a skidder it's been very reliable
Crack each injector line open one at a time and see if one of them makes the noise go away. If it does swap that Injector with another cylinder then repeat cracking the lines loose. If the knock stays at the same cylinder then it is a lower end knock. If it moves then it’s a bad injector. With it getting as hot as it did, doesn’t look too promising though.
It's always a sad day when you're old faithful finally gives up and dies, but she can now rest and be remembered as you pass by and catch her in other videos, for all the good hard work she's done over the years, REST IN PEACE old girl.
Garry Walker 13 years of faithful service. Long summer hours in the hot sun. Cold winter mornings shuffling cars around. Probably a million pounds of engine blocks moved. She’s pushed snow, dirt and rock. Helped spread asphalt for our driveway and dig out a few other stuck machines... this old girl pod her weight in gold for profits.... it’s not the end I hope. I’m going to try and find another engine. Or see if this one is salvageable. Let’s take a moment of silence for her...
@@MXguy95 Well a good bit of heart surgery or if needed and can be found, a heart transplant for her would do wonders and then she could give you another 13 years of good hard loyal work. Just out of curiosity, it's 16.30 (4.30pm) here in England, what's the time difference there bud.
You can tell it’s rod knock cause when’s it gets warmer it tends to be louder unlike when it’s cold and u can hear the rings gouging the cylinder walls like a screeching sound
Ian Above freeze plugs kept popping out , machine would overheat before you even knew it. A few times of that and she started tapping down in the lower field, by the time we got it Doug out and back up to the top it was toasted.
I believe that engine is Komatu's version of the Cummins 6BT. Should be a fairly easy swap out of a good engine from a Dodge P/U. czcams.com/video/qtDc-jPhug8/video.html
Power equipment in Chattanooga Tennessee or even the komastu dealer and manufacturer in Chattanooga can probably get you a good rebuilt engine dont know if it would be worth it to you or not
@@MXguy95 Awesome, Glad to see someone using their hands and brain. What about re-building the original engine (I used to work at a truck place and know a bit about diesel engines)
Sounds like my Ford F-150 when it threw a rod, i just got it back from a shop after a intake swap, and the next day it was hung in 2nd all the way from my house to my work and when I went to leave it started to backfire and spudder and i ended up having to jump it to life and it started squealing and finally i got a tow home and ended up sending it in my drive way but it’s all good now it’s got a new motor in it i think its on it’s 3rd motor now lol
TAE TAE it’s a 5.0 it’s been thru 2 motors and transmission now it on it 3rd motor and trans I really should of just stop putting money into it but it’s a pretty nice old truck and I didn’t have the heart to let it die lol
I operated 2 international 510B Hough's that were repowerd by komastu engines 6 thousand dollars for a new motor and 6 thousand for labour good machines till the transmissions went out in them
Dennis Henderson I plan on doing the engine swap ourselves. Save the labor right there. When the old track loader blew up we swapped it ourselves. This should be a cake walk compared to that. Just finding a cheaper used engine seems to be the challenge
Jay and may not be cooked and just might be in limp modeI know my school bus goes into limp mode and it's designed to do that to protect the motor you won't get no power out of it until the problem is fixed
Mark Tellez sadly it’s a rod bearing failure, engines overheated a few times now and she’s just wasted. I’m going to go ahead and hunt down a new engine.
ls swap it? ok bad joke. the yard hear rebilt or chained the moder do too it was lass than another rig.my car sounds like that and bin driving it 3 mounts
If there is room to drop pan and replace bad bearing, might have more life in her. If no it's off to the scrap yard!!!....oh yeah, it's already there......
justsomeguytoyou theoretically old age can be a diagnosis. Everything wears out eventually. just because something is properly maintained doesn’t mean that it isn’t going to fail at some point in the future. Even the most well maintained vehicles end up in the junk yard eventually, if the owner chooses not to do an engine rebuild when necessary.
She's in the big scrapyard in the sky now.
Christoph Esta replace the rod bearings and it'll run for a long time more
@@spankthemonkey3437 It's probably not worth rebuilding the engine on such an old piece of machinery.
maybe since it also had a construction logo on it Its in a very big construction site in the sky
@@pibbanon1987 get a newer service short block and make a YT ep series on it, pays for itself and gets more $$$$$$ for JAY
As you said, That volvo you guys got was the new king of the scrapyard. It seems to have completely overthrown the previous king!
I just hope that Volvo holds together for awhile. This machine here gave me 13 good years! And would have been alot longer if I had known about its other issues. But alas, I cant change the past. But I can move forward.
@@MXguy95 Sounds like it had a pretty good run. The Volvo l90d seemed like it had a lot of life left in the video, I have faith it will last. You know far better than me, though.
Throw another motor in it she still seems to be a solid machine yet.
GMC Jimmy that’s what I’m hoping to do!
I had an old ford 300 inline with a rod knock drove it for 2 years before it blew up
That's pretty lucky.
Best engines Ford ever made imo. My boss at a place I used to work had a F150 with the 300 six, he had over 700k miles on it.
I'm so proud of her for pushing to her grave.
rust inpease
Send it to MUSTIE 1 .he needs another bigger project
or have a SKPYE confab with MUSTIE1 on your YT channel and see what he thinks of your situation, My GOD you guys could resurrect any thing MECH with minimal cash outlay..................
You should put a Detroit in it we had a loader that had a cat in it lasted forever but when it went out we found a 453 Detroit out of a skidder it's been very reliable
It's not that bad that knock let's you know its running lol!
Time to do some red line neutral drops in this sob. 😁😁😁
Damnit man! I am surprised you didn't pull it up to the shop to work on it. It's no creampuff but Komatsu equipment is usually pretty good.
Time for an LS swap!
Crack each injector line open one at a time and see if one of them makes the noise go away. If it does swap that Injector with another cylinder then repeat cracking the lines loose. If the knock stays at the same cylinder then it is a lower end knock. If it moves then it’s a bad injector. With it getting as hot as it did, doesn’t look too promising though.
It's always a sad day when you're old faithful finally gives up and dies, but she can now rest and be remembered as you pass by and catch her in other videos, for all the good hard work she's done over the years, REST IN PEACE old girl.
Garry Walker 13 years of faithful service. Long summer hours in the hot sun. Cold winter mornings shuffling cars around. Probably a million pounds of engine blocks moved. She’s pushed snow, dirt and rock. Helped spread asphalt for our driveway and dig out a few other stuck machines... this old girl pod her weight in gold for profits.... it’s not the end I hope. I’m going to try and find another engine. Or see if this one is salvageable. Let’s take a moment of silence for her...
@@MXguy95 Well a good bit of heart surgery or if needed and can be found, a heart transplant for her would do wonders and then she could give you another 13 years of good hard loyal work. Just out of curiosity, it's 16.30 (4.30pm) here in England, what's the time difference there bud.
You can tell it’s rod knock cause when’s it gets warmer it tends to be louder unlike when it’s cold and u can hear the rings gouging the cylinder walls like a screeching sound
Put the wheels of the komatsu on the chevy gmc "what have I done" 4x4 truck
Another ole Betsy saying goodbye. Sometimes they go out quiet and sometimes they fight like hell. This one definitely fought to the end.
From the looks of that beast, I'd say you guys got your money's worth out of her.
Jay your subscriber game is getting STRONG!!!!!!!
Do a video on that beautiful blue Mustang at 3:32 😉
You can keep knockin but you cant come in
Tear it apart and fix it Jay ! You can do it or you will know then exactly what broke .
buy another wrecked CAT and swap the emgine
Why did it throw a rod knock?Operated with old/low oil?
SHE GONE...!
Sam 1985 toasted!
Making dinner. Watching this. Don't know why, but I'm here. XD
well that is to bad you have the new one to use if you want to you can fix that one and that you could take your time doing .
What happened to the orange f250
5:24 at least try and save that nice red Toyota pickup, it looks in decent nick
Thats why its over there, Im looking for an engine for it
Ahh she's gotta another 30 thousand hours in her
William Stuples yeA I wish haha
cat or deere the best 2 there are. atleast that thing drove to her grave saves y'all from draggin it around.
toss a 5.9 12valve in it, im sure deboss garage would help! lol
Bob The Builder can Fix it 🔨
so can MUSTIE!!!!!!!!!!!!!!!!!!!!!!!
Y’all are hard on equipment
what about a Detroit 2 cycle
that trapter is chooched
Awesome video
Hey jay google in komatsu parts u will find an engine for it and parts too thats a good front end loader dont let it die
Steve Cutlas I’ve been looking around. Hopefully I can find something soon. Get it swapped out before spring time.
Uncle Rod trying to visit!!!
How did the engine fail, no oil or lack of oil changes?
Ian Above freeze plugs kept popping out , machine would overheat before you even knew it. A few times of that and she started tapping down in the lower field, by the time we got it Doug out and back up to the top it was toasted.
have you found another motor for it yet?
Man, should have induced an oil leak, then we could have had a diesel runaway video 🤣
For sale: Komatsu loader, needs some T.L.C.
Wayne Lutwiniak nah, we will stick another motor down in it .
I believe that engine is Komatu's version of the Cummins 6BT. Should be a fairly easy swap out of a good engine from a Dodge P/U. czcams.com/video/qtDc-jPhug8/video.html
how old was the machine
What the updates with the trash truck
Matt Sorensen school bus driver still has injector pump issues. Haven’t got it straightened out yet.
Dead loader rolling!
They twist till they quit and it would of been nice if it cooled some so they could roll the motor to get the torque converter bolts
Sounds like a train!
R.I.P solder
TAPS..............................................
Eh set of sleeves pistons amd engine work and it would be like new again.
Why don’t y’all get a crusher? It would be more efficient and damn fun to watch!
what would the old girl sell for
WOW RIP Komatsu WA180 .
Lucky U have the Volvo than.
Need to some Caterpillar equipment last forever
Toss a plow on the front of that blue mustang convertible. Something to get you through right?
I hope Gov. Deals is in your browser history.
Rick Onslow it isn’t, but should it be ?
It should indeed. For once served, in your hands can serve again. Happy bidding.
Swap the engine and add it to your fleet!
You have tons of engines in that junkyard. I would try to find a straight 6 out of a old ford or a Cummins straight 6.
pontiachotshot Cummins maybe. But an old ford probably wouldn’t fit the bill for this.
Jay Smart what about the fuel injected 4.9 straight 6 ? From ford .
Easy to find and a reliable beast.
Power equipment in Chattanooga Tennessee or even the komastu dealer and manufacturer in Chattanooga can probably get you a good rebuilt engine dont know if it would be worth it to you or not
r.i.p. Komatsu
Are you going to get a new one
Are you going to put a new motor in it?
I think I can I think I can lol.
i saw over 12.000 hours on that clock,
12.000 long hard hours with like no upkeep.... good machines those komatsu's
What kind of engine did this thing have?? Does anybody know??
Are you going to fix it? Repair and sell for profit
Thats the plan, I'm on the hunt for a used engine now.
@@MXguy95 Awesome, Glad to see someone using their hands and brain. What about re-building the original engine (I used to work at a truck place and know a bit about diesel engines)
You gonna fix it
Yea.. Im looking for an engine now
@@MXguy95 ask MUSTIE 1
@@MXguy95 or channel @Watch wes work
What happened to the videos where we saw you fix things . We never see you
B thornton I still fix stuff. Just not in front of the camera .
WhY dOnT yOu LS sWaP iT?
What's going on with the garbage truck
gmumble still having injector pump issues. Haven’t gotten it straightened out yet
You don't need bearings.
Rest in potato’s loader
Shes done for
should drain the oil and see how long it runs before it throws the rod! Make for a good video!
Sounds like my Ford F-150 when it threw a rod, i just got it back from a shop after a intake swap, and the next day it was hung in 2nd all the way from my house to my work and when I went to leave it started to backfire and spudder and i ended up having to jump it to life and it started squealing and finally i got a tow home and ended up sending it in my drive way but it’s all good now it’s got a new motor in it i think its on it’s 3rd motor now lol
5.4?
TAE TAE it’s a 5.0 it’s been thru 2 motors and transmission now it on it 3rd motor and trans I really should of just stop putting money into it but it’s a pretty nice old truck and I didn’t have the heart to let it die lol
@@caseyh1616 what year dude?
@@caseyh1616 buy a Silverado man lot less maintenance
@@caseyh1616 or put a 351 in it best motor ford made
I would like to buy it
Could be injectors. They can make a rod knock sound when failing.
I wish , but this is bottom end for sure.. Shes toast
I operated 2 international 510B Hough's that were repowerd by komastu engines 6 thousand dollars for a new motor and 6 thousand for labour good machines till the transmissions went out in them
Dennis Henderson I plan on doing the engine swap ourselves. Save the labor right there. When the old track loader blew up we swapped it ourselves. This should be a cake walk compared to that. Just finding a cheaper used engine seems to be the challenge
Jay and may not be cooked and just might be in limp modeI know my school bus goes into limp mode and it's designed to do that to protect the motor you won't get no power out of it until the problem is fixed
Mark Tellez sadly it’s a rod bearing failure, engines overheated a few times now and she’s just wasted. I’m going to go ahead and hunt down a new engine.
Should have just driven it straight to the crusher while it we're still going🙏😉
Here lies: Komatsu loader. She died with friends by her....uh, parking spot.
ls swap it? ok bad joke. the yard hear rebilt or chained the moder do too it was lass than another rig.my car sounds like that and bin driving it 3 mounts
Get a catpiller loader. It almost sounds like a helicopter
Zach Zimmerman Too expensive! Wallet is already about to starve to death in this economy
Rip😆 How old was it?
Menno Boon I don’t know the exact year model... I’m thinking late 80s early 90s. We’ve done 13+ hard years of work with it.
Why is there a toy mustang
If there is room to drop pan and replace bad bearing, might have more life in her. If no it's off to the scrap yard!!!....oh yeah, it's already there......
why hot your fan not work ;p
Damn, that sucks. What is the official cause of death? Did it run low on oil, overheat, etc?
old age??????????????????
@@gertraba4484 Old age is not a valid diagnosis
justsomeguytoyou theoretically old age can be a diagnosis. Everything wears out eventually. just because something is properly maintained doesn’t mean that it isn’t going to fail at some point in the future. Even the most well maintained vehicles end up in the junk yard eventually, if the owner chooses not to do an engine rebuild when necessary.
Do a burnout
Blow it up then put a new motor in it
12v Cummins swap
It seems like evry thing is breaking on you.
Michael Bustillo there’s ANOTHER broken video coming up... track loader went next.... smh
Jay Smart i’ve been wanting to ask, how is the Corolla wagon and Charlene?
Rip
Get a Volvo l110 or l150 loader
Sucks the old girl died good thing she did push her to the grave though
Eddy's shenanigans she had one foot in the grave and still managed to dig her own hole.. poor girl deserves a new heart just for that.
@@MXguy95 I'm with ya
Clogged injectors
F
😕
F