FreeCAD 5 simple 3D models, part 47

FreeCAD 5 simple 3D models, part 47
Welcome to the channel Miri tech workshop.
My name is Miro in this video there is an accelerated recording of the modeling of five 3D models. During the entire process in FreeCAD, I primarily used Part Design and Sketcher. Some models may have been created using incorrect procedures, but some tips may inspire you. If you have ideas or constructive criticism, please share them in the comments. Have a nice day :)
1.
To begin with, we select part design and create a new file, a new sketch. We are careful that there are no points of freedom, so we enter the dimensions and connections. Use the Pad function to pull out into space. In the 3D model, we can conveniently knock down the edges.
2.
In today's video, I drew a simple shape similar to a brace with a hole in it. In Part design I created a new sketch and selected a plane. For more convenient drawing, I chose "Create polyline" and drew the outer perimeter of the part, with the same dimensions I defined and used "Constrain equal" ...
3.
In this video I drew something similar to a corrugated sheet. At the beginning, I chose "Part design" and in the sketch I drew the desired shape of half of the intermediate circle. I used bindings and defined the necessary dimensions. On the bottom part, I used binding in the middle so that I could use the next step.
4.
In part design, I created a 3D model that is simple and, in my opinion, looks quite interesting. To begin with, I chose the "Additive sphere", selected a plane and a new sketch. In the new sketch, I drew the shape that I wanted to remove from this ball, I defined the necessary dimensions and after confirming the sketch...
5.
In this video I modeled the cover. The cover model had a circular shape and has 2 holes for fixing. To begin with, I chose the Part Design workbench and drew a Create circle, I drew from the center of the coordinate system, I entered the dimension and after closing the sketch I used the Pad function to release it into the space ..
1. 3D model. 00:00
2. 3D model. 02:01
3. 3D model. 03:36
4. 3D model. 05:44
5. 3D model. 07:35
Vitajte na kanáli Miri tech workshop. Moje meno je Miro v tomto videu je zrychleny zaznam z modelovania piatich 3D modelov. Počas celého procesu vo FreeCAD som primárne využíval Part Design a Sketcher. Niektoré modely mohli byť vytvorené pomocou nesprávnych postupov ale niektore tipy vas mozu inspirovat. Ak máte nápady alebo konštruktívnu kritiku, podeľte sa o ne v komentároch.
Prajem pekny den :)
#freecad #partdesign #3dmodeling #sketch

[@rudolfowalchonzo2356]

Exactly what I was searching for my 3D Prints. Thank you very much.

[@rongziwang8722]

dear sir.
could you do some models like "writing machine " from czcams.com/video/w1urQnTpvn0/video.html ?
it is exciting to make 3D models cooperate correctly.
my biggest question is how to subtract the Bearings or GT2 Belt from one objects, maybe you show some hints,
thanks.