Custom Widebody kit and LS swap!
Vložit
- čas přidán 7. 09. 2024
- Today we get back to work on the LS swapped Honda. We figure out where an oil leak is coming from and get the motor back together and put back into the car. Also, we move into bodywork and custom fit a hood. Once the hood is fit we have a decision to make, and I would like to hear your input. Finally, we get into fitting the widebody pieces onto the bumper from the fenders. Thanks for watching and let me know what you think.
Nissan S12 Turbo hood scoop would look perfect.
😏👌🏽 your right dude I'm looking at the pics side by side
I wouldn’t bother making a bulge , you can easily grab a few pre made hood scoops. If it starts to bother you in the future do a second hood with a scoop or make it removable
I think I like the hood opening!
I can't wait for you to get that home shop built .
You should try to cut on the natural hood body lines, and raise that entire section up to clear. That way there is that oem look to it all. Almost like an old school muscle car scoop.
I definitely like the minimal look. I think its a total improvement over the last design. The open idea might be the best. I think a scoop would add more bulk unless you made it like perfectly formed or something.
Opening looks amazing , glad you’re back. I’m a religious person and oddly you have popped in my mind a time or two and I prayed for you. Didn’t know what was going on and didn’t matter I just felt you needed prayers. Glad to see you’re back man. Keep God close and crushing them goals.
I’d cover the hood. I think a cowl style way narrower than the first hood. I never really liked the hellcat hood at all. At the end of the day it’s your car so satisfy yourself and do the way you want 👍
Yeah bro, leave the hood open. Looks sick!
To start off happy new year and for those who don’t know Betty white is gone but lives in the image of this bad ass car The legend lives on if you know you know the vibes
Me and my buddy put Play-Doh under the hood and closed it to see where it touches. Your style works too. Love the builds though. Glad to see you back.
Once I heard about Betty White’s passing. I thought about this Betty White. And BOOM, new video!!!!
Really stoked you're back, looking forward to more frequent vids now!
I'm so glad you're still here making videos man. I've been watching since the cantilever integra build. . .
looking good and yea the cowl wasn't where it was at
What a sick build!!!! 👌🏽
We’ll done man!!! 🔥🔥🔥
I like the hood cutout..you could make a simple and removable rain cover out of a sheet of magnet (like people use for track day door numbers). The hood is square and flat if you got a big sheet you could just slap it on and off and with a heat gun you could even form the bulge into it. IDK, just a thought!
I think the opening looks fine man! Glad your back on it👍
I’m glad to see you are back at it!!!… I can’t wait to see the end result
The hood you originally made is absolutely fire how I whould stick with it
I think it needs a bulge or a scoop. The wavy opening does not suit the 80’s lines of the car. Is there a bulge you could cut from the hood of another car that’s already made that would save you some fabrication?
Hood looks good👌🏼. I dig that accord man. Looking forward to the end product.
Go wild and create a clear acrylic bubble to fit the shape you cut. 🔥
Nice to see you back
great work ate, may i say i love this build so much. there few people doing a rwd swap and v8 car from what you started with. love these kinda videos
Id personally wanna cover it some how but maybe more like with some premade hood scoop or something you could fiber glass onto the hood? Doesnt look bad at all but hard to say what would be more subtle if your trying to keep it kinda sleeper style. Either way its cool to see the honda back in the shop and coming along! I love this build. Always wanted to do a rear wheel drive prelude, that was my first honda. Still miss that car!
Glad you are back!
Hey Adam Happy New Year to you and your family and i hope to see you upload a lot more content this year.
I definitely will be! Thanks for watching and happy new year to you and yours!
@@BodeVision Thank you Adam and glad to know you will be.
Glad to see you taking time with your content always here to support
Sickest intros in the game. Love it man
Hell yeah! What a way to start off the new year with a BodeVision video.
I really need to get to my project this year myself.
Glad to see ya back! Miss those super awesome intro’s. Best in the game!!
This project is looking amazing keep at it man!
Rip Betty white, and been waiting for the accord reboot 👊🏼🍻💯
I’d leave it open, or get a scoop like you said later on. It doesn’t looked hacked at all, you did a very nice job with it! Happy to see you back and working on the accord! Keep it up!
You should check out Bello's Kustoms on youtube. What you need is a planishing hammer on a stand. If she were mine I'd put a gentle tear drop shaped lid on that hood and seam weld metal in. Mike Bello is such a pleasure to watch and I think you'd really enjoy his metal work. Nice seeing you still hard at it.
Man this car has come a long way!!! I think the hood scoop would look dope different for sure.
"Legends never die, R.I.P Betty White."
RIP Betty White, but that's a bar lol.
Nissan gtr, S12 RX7 hood scoop would look really good.
So excited about this post man...highly anticipated
Maybe a knight rider style bump would look clean, kinda think leaving it open plan in an area of the world subject to sudden downpours might mean water dripping down on top of the engine.
Liked the original hood. But i do see your point. A subtle bump in the hood would look nicer. Whatever you come up with, it's gonna look good. Glad you're back. Happy new year 🎉
Damn it’s been a minute good to see the accord ls again
I like the hump. I'd do the scoop in between the center of the body lines on the hood. Kinda like the D1 hood. They actually sell a universal d1 hood scoop. That would look sick and aggressive with the lip kit your fiberglassing.
The ultimate achievement would be to use an oem hood and have it fit without cutting. If you used risers on the hood hinges and then used fiberglass to extend the edges to make up the difference...
Ive been following hush performances development of a hybrid hood where they use the usdm and jdm hood for the crx to make a fiberglass hood that will clear the bigger B16a valve cover. I think you have just as much experience with fiberglass that u might be able to apply that method to this build... It would also go perfect with the wide body kit!
Recommend shaping it out on a sand bad and rubber shaping hammers out of one piece so it will appear more fluid. Can’t wait to see this car done great job love the videos.
Happy new year and I hope you will be making more videos this year. God bless you and its going to be a great new year for you and your family
The only guy I would have paint my truck!
The finished car is going to look amazing!
A hood scoop from a cobra 2 76 77 78 mustang had the mustang 2 and the cobra 2! And they are easy to put on turn backwards would look awesome !! I think but you always have great ideas so ! Just throwing it out there ! ??? It even has the crease in the middle of the hood .
You could move the power steering reservoir to clean up or make the hood cut out smaller
I think if you space the rear of the hood with some hood risers good ol’ eBay special. And then also get one of the D Max style vent cut out so you have a functional vent in the hood and if need be just cut out the two or so slats you’d need to clear the throttle body and intake tube.
I also just thought of the vent some use for like a V mount set up, think it’s one from an evo X. set the vent right over the throttle body and tube. Think those would make for some cool functional vent in the hood that also clears the stuff you’ve got just poking out the hood now. Hope these ideas come across clear? Hope they help if it is translating correctly…? 🤞🏽🤞🏽
Happy New Year Adam. I like this one. Dutch regards, Nico.
I think the opening looks best or you could make somthing like a lip around it like lots of aftermarket vented hoods only the motor stick out would be in the vent I think that would finish it out amazing
Use the bump up from the other hood and place it over the center of the new hood. Looks stock except 1inch-2inch taller
Alright it's 22 now so let's see that more videos of this project. Happy New Year B
The body lines and angles of that car reminds me of a 1st gen Fox body Mustang ('79-'82), so I'm thinking you could easily bend up a hood scoop similar to that.
Might look more factory.
Btw, Happy New Year!
It's you again!! 🤙
Yes 2022 is already 🔥!!
Keep seeing what you can do with the sides of the bubble and when it's done, put a scoop
hood looks dope as is, if you could make something like the e92 M3 hood that would look sick as well
Good to see you back sir, I’d make a foam piece in the shape you want then fiberglass it instead of leaving the hood open.
Coming together, maybe a pan from restaurant supply store or something 🤔. She's running again though!
Looks good!
Happy New year you literally gotta resurrect the Betty white
Maybe try making the opening a perfect circle? It's already close to a circle. Can do a Japan flag off the hood that way too in the paint design. Would look pretty cool and no one has done it.
An architectural rendering of the accord on a shirt would be dope, I'm Honda T.I.D
That’s an awesome idea. I’ll definitely have accord merch once the cars done
Throw a hood scoop on it and call it Bro. Welcome back I gave up hope
Great video man
Welcome Back
Happy New Year,Adam!
Maybe a Subaru hood scoop? But looks cool open other than the power steering cap
Bulge for the win it would look so good yes a lot of work but it would look so unique and you would leave people guessing what’s under it hope you decide to do it later on
Bode! Happy New Year brother 👍🍺
Very nice
Great to see you and Betty White (the car) back rolling again. Really love your content Adam. Keep ‘‘em coming in 2022! I’m out!
Need that next one to drop my Dude.
Keep the opening and trying to make the bugs and don't look all that great but the opening looks real good
Happy New Year
Personally I feel as though fabricating or fusing a scoop would give the car a more complete look, a Turbo II Rx7 hood scoop or a 79-85 style mustang GT scoop would be perfect on there
I would do a custom hood cowl. It would look a little more muscle car-ish and hide the cut out
I'd be tempted to make the bulge how you want it to look out of foam then fiberglass it like the rest of the wide body, but either way keep up the good work it's looking 80s-tastic! 👌
Hey Bode great to see you uploading again, I think it looks awesome as it is as it doesn't look like it's been hacked about but has a sculptured look to it as if it's meant to be there. As others have mentioned you could always get an off the shelf bulge or scoop and add it later but I recon a man of your skills could even make it removable to have the best of both worlds, stay safe 🙏👍 John UK.
Happy new year 🎉 Adam
🤔 i think you sould run with a hood scoop type i think it would look good but the original hood idea you made looks good to but you can make it lower to blend in with the hood but don't kn man I mean what ever you run with i dig it 👌🏽 but im glad your working on Betty white again can wait for the body kit complete its gonna be fire #bodesqaud #milestoneto100k #projectbettywhite #ripbettywhite #v8accord
Keep the cut hole or the cowl hood. The blocky looks better then a bubble.
Taking bets now on how long before we see this monster on Hoonigan! Coming along nicely Man! A paint job's gunna transform this thing so much when the time comes. Looking forward to it. 👍😎
Super cool to watch, I would stay with the opening in the hood, no bulge
Nah, on the hole in the hood. There's scoop available online you can buy and install with structural adhesive or something.
Welcome back betty white
I like the idea of using an eclipse style hood bulge. I think it will affect the car's lines the least. One thing I am wondering is why you would cut out the hole to fit around the power steering reservoir instead of remote mounting it? Also, are there aftermarket fuel rails or intake that are lower profile so you wouldn't need to cut for those as much or at all? And, if you got a dry sump setup would you be able to lower the motor enough to not need any external hood cutting at all?
Open For Sure!!
We missed you bode, hope all is well .
Hey, big fan here. Do you have any idea of it's 0-60 and quarter mile time, I think that'd be very interesting. Anyways, love the build! Much love from Germany
Big D Delivery!
Hey bro, why don't you get some fiberglass sheets and mold something with that? Seems quicker/easier. 🤟
You should build a Lancia Delta Integrale “Final Edition” Hood
maybe a subie style scoop??? might look ok .... me personally i do not like cut hoods ( why i didnt jswap the sol)..... but to each their own 😛
I reckon you should of moved power steering bottle and then had even shaped opening in hood
love it get er done
A bulge like a 1G DSM looks great and period correct. I would pick up a 1G hood and see if you can use part of that metal for your hood.