Video

Can you point use to a site that has a download for the AG01 gimbal pdf?

Hi, thanks for this video, I have a Trex 450 with AR7200BX, I configured it all as per your instructions, but the pitch even though it’s set to 9.5 degrees both positive and negative and very close to zero degrees at centre stick, it seems to be crazy and moving the sticks a couple of notches on the transmitter is making the heli behave very erratically. Do you have any ideas why that would be? E.g. if I move the pitch a tiny bit to positive for the heli to climb, it’s starts to climb extremely fast, if I then move the stick back to where it was instead of the heli going back to a hover, it starts to slam toward the group like I have negative pitch of 9/10 degrees. I have other Trex with mini K-Bar fbl system and it doesn’t behave like this. Any ideas?

Nice video series! Thanks man 💪

That beard looks good

I dropped my Spektrum dx9 black for a Carbon Radiomaster 16s Max and I'm so glad I did. It got me excited for the hobby all over again learning new systems is awesome. I'm glad you like your new radio

You look like a kid in the candy store. You can't wait to test that transmitting out to play. 👍🙏✌️

Man, technology is light years ahead of when I first started. So glad to see you happy and back. Been following you for years.

This radio looks like its going to be awesome. Im very excited to give another system a go. 🚁💯💨

Yay

Good to see you bro. Been watching you since the 130x review

I know you can't wait to dig into that nice transmitter. The color combo is nice. Looks good with the helli on your desk. Peace my brother.

Glad to see you back. The kids must be getting big.

are you sponsored by spirit ?

Awesome to see you back again ..

Hi Freddy, they look like the AG01 Gimbals. Quality 👍

I'm glad to see you back here again man. You're the reason I'm obsessed with helis

Freeddy! You have not aged one bit! Good to see you testing out the Spirit Wave! Cheers!

HELLO 👋 HOW HARD TO TIGHTEN HELICOPTER BLADES?

lol my engines just cut the ties, then i was screwed becasue i had loads of plastic stuck up in there, dont work unless sleeve loose

about time my brother,good to see you. Leland

Looking forward to this, always enjoy your content

Welcome back mate!

Nice to see u back buddy I keep up with you on facebook keep up the great work flying and building Drones

I would like to thank you man I been operating drones since 2016.I always looked at Helicopter pilots for a minute and enjoyed watching the amazing things people can do with these helicopter. Long story short. I started checking some helicopter rc pilots and I bumped into your tutorials. I love the lesson you gave on CZcams. I felt so confident about learning to operate a rc heli.I made a big decision to purchase a S1 rtf from Helidirect.I have to give thanks to your tutorials. Thanks my brother. ✌️🙏👍

Holy crap. You're back. It's been MONTHS. The boys must be getting big. Greetings from a loyal fan.

Gawd...this is awesome...thank you sir

How do you control your governor if you are using Aux2 for the glo plug ignighter?

Want to build mine.lol

Awesome..but can't concentrate w the music...why!! You're a great teacher..you don't need the fluff and it ruins it

super beginner here so first, Thank you for posting this explanation. I was wondering how the pitch curve begins at throttle setting of zero along the X axis, but the curve of the pitch is zero along the Y axis...mid way up, and not beginning at the same point as the throttle. .but, then I realized..i think, that there should probably be a horizontal line at the 0 pitch delineating positve and negative pitch .. is this correct? Or possibly the curve could begin at zero ON the X axis, and progress in the negative direction.. Im confused

I long for the day when utubers stop showing off. Just give us the facts We neither care what your call yourself or your taste in music.

Hello , I'm new to Helicopters . I have a 450 SE . My question is the top or large gear spins as it should but the smaller bottom gear witch is the main drive gear doesn't spin at all . Have I forgot part of the Radio commands?. Thanks , Bobby M.

Wow needed this thanks Freddy

Freddy, Thanks for all your videos. Do you have anything on the GeoLink yet. Running into a problem in getting Both a Stabilization and Rescue set up on my IX 12

Hi Freddy I’m setting up a 5.5, xnova 4020-1350kv (6mm shaft) and Hobbywing 120a esc. Drive train is smooth as butter. At 75% throttle (Futaba) im getting just 1850 head speed. Is this correct? I have both the stock 14th (6mm) pinion and the next pinion up - 15 tooth. I’m running the 15 tooth now. ESC end points done and RPM standardisation completed on the Hobbywing 120 esc. Futaba CGY760R T16iz

Nubby here...got alot to learn when i get a heli. Good stuff 👍☕️☕️✌️

Interesting 👍☕️☕️✌️

Thank you

Where can I buy this gauge or a similar one with roll and pitch?

Hey Fred how do you set zero pitch and I’d it that important on these micros? In normal 3D mode it isn’t zero at mid stick but it is in idle up. Is that what matters and should you level your swash in idle up? Thanks. I guess levelling a swash and setting zero pitch are different things? Would you have to turn links and should it also be a zero pitch in normal mode? Sure seems to fly rock solid with no drift regardless. Thanks.

does it have tree glow power level settings ?

Freddy, new to the hobby, I am using Spirit 2 and following your great videos ! When I level the swash then go to pitch range I set to 140 like your video but my mixing is not great, I can have 2 points drop off the swash leveller during travel, my links are correct length, I keep going back to the swash levelling and doing again and get perfect but I cannot get past the test in pitch range, am I doing something wrong here ? I’m setting up a Align 470LM

Thank you Freddy. I needed this information.

Every time I have issues with my helis..... its FreddyCanFly to the rescue.... cheers Freddy!! 5 Star from me. 👍

Freddy any of these for sale where you are.non in uk

hows it going freddy,, are you in future going to do a video of setting up the Fc6250hx there is a few on here but, dear god i cant handle the constant way they repeat the {fc6250hx word every 20 seconds} ! your tutorials are easy listening and down to the point with no confussion, , keep up the great work. cheers stevie.

Awesome Freddy , getting my 50 size heli setup by a mate of mine, looking forward to practice some hovers after watch your video, you are one of the best Rc heli instructors for sure👌

This kid is so annoying.

Best lesson I’ve watched!

Now you can get your M7 as you said in the video 😀