Video

No worries 👍

👍

No worries 👍

@@Yeekiee 🤣

👍

Hopefully someone has a solution for this issue.

No

@@technologyteardown Weird because it’s still not showing the picture….

@@FunnySuitGuy try taking the memory out and putting it back in. If that didn't work the game you are trying could be faulty so try a couple of different games. If still you are having issues, the memory module may be faulty and need replacing or there could be a different issue like a game slot issue or display issue.

You may need to pull apart the remote and check under the buttons to see if the connections need to be cleaned.

Glad it helped!👍

@@geovanniforbes6510 👍

@@Coldturn check out the comments. There are lots of solutions that other people have.

🤣😅 I have since then.....you would hope

@@katwill9251 it won't matter. The inquiry number comes directly off the switch and you just use the email you want the code sent to.

?

No, but the ports do. For example in an HDMI cable or any other one, both the ends are male conectors They go to a female conector(a hole) which is on a pc or a phone, depends on the situation

Cables have always had genders. Male sticks out. Female doesn't.

No, but cables and ports do, for example, the jack of the headphones is male cause it's a plug that gets inserted in the jack port, which is female cause it's a hole, same thing goes for AV cables/ports, the cables are male while the ports are female, again same thing with HDMI, chargers, power cables ecc...

Sounds like the tape head needs cleaning.

@@technologyteardown I did it but didn't resolved the problem 😶

The tape head could be very warn or damaged. The other thing I have seen is that with some VCR's the automatic cleaning arms can leave dirt and degraded rubber sneering on the head because they are getting old and breaking down. If it's that, after a clean the tape head works fine but then after 2 or 3 more uses, it's back to being dirty. Otherwise, if it's none of those things, hopefully someone experiencing a similar issue can give us an idea of a solution. 👍

👍

🤣

As soon as the battery is removed the console will lose any data that is on it. You could try backing up the information to an sd card if the console will allow it.

No worries 👍

No worries 👍

Everything I have looked at says it is compatible, but I haven't tried it myself so I can't guarantee it.

I am not surprised. It maybe cool to have a wireless PS2 controller, but they really aren't built that good.

Thanks, this might help someone out having a similar issue. 👍

Might be helpful to someone. Thanks 👍

What model?

Thanks mate 👍

👍

No worries 👍

😢

Good advice 👍

Sounds like the connection pins on the game port. There are some videos on youtube that will show you what this issue can look like and how to adjust/fix the pins.

Hopefully someone will have a solution to this.

Great to hear 👍

Happy it helped 👍

😢

👍

👍

It worked

@@Mr_British_guy great to hear 👍

If Google can't help, I don't think anyone else will be able to. But hopefully someone if they have had a similar issues leaves a comment with a solution for you. Good luck. 🤞

I forgot my pattern after not using the watch for a while. I done this reset and my pixel 8 phone asked me if I wanted to use my Google account to unlock the watch and reset the screen pattern.

Sounds like it might be the video head or the video signal, but hopefully someone will know and leave a comment.

Thanks mate! 👍

😢

@@Lily_faith227 you can, but only if liquid has been spilt on it and you need to dry it out or to replace a faulty component like the battery.

@@technologyteardown how do you open the remote??

@@technologyteardown I washed it in the washer?

@@Lily_faith227 I believe you can crack open the casing by going around the edges with a small flat head screwdriver. There are other videos on youtube that show how to do this. Otherwise you could just let it dry out naturally by sticking it in a bowl of dry rice for a couple of days. But it is very likely it will need to be opened to get the water and other moisture out. Good luck 🤞

@@technologyteardown thanks luv, I disassembled it!

👍

@@jlynchyarts 👍

@@technologyteardownit pays for me to read the instructions in future lol 😂

@@jlynchyarts 😂 glad I was able to help someone!