Video

I'm curious. What is the purpose of the calibration? How do you know when it's needed?

Would you say this is a massive drone?

Hope they don’t outlaw it

Which drone is better chasing m2 pro max or qysea fifish e-go

How about for your phone like for android phone

how do you get that pdf ??

Does it work? It’s a $10,000 drone.

I saw the option on the controller to connect it to RTK. Do you know which RTK base is compatible with the M30T?

Hi there. I have fifish evo drone. Can have same settings for my controller..?

Cool video.

Great informative video, BUT: Why are the antennas pointing straight out in this video? I know it was not a flying demo, but sheesh, showing newbies the wrong orientation? Not good for proper signal, They should be 90 degrees / perpendicular to the location of the drone for best transmission.

Looks like might need recalibration. Still pretty cool.

That’s a very bright flying light

We just flew our first mapping mission and are having trouble converting the pictures to a map any help?

Daaaang look at the wind tilting the drone but that gimbal just keeps the cameras stable, heck yeah!

Wow interesting , does something for usb C / android exists ?! Did get random disconnects from time to time, which is scary as hell 😅

How does one keep this unit on line It constantly goes offli

How do I open the hard shell of the fifish v6 expert

Thank you for the video! Did you use mapping software that is built into the controller or use something else like Drone Deploy etc.?

how did you export the las file to cloudcompare? Can you remove trees?thanks!

*Promo sm* 😔

Just wondering if you were mapping a larger area and batteries got low and you popped new batteries in will it pick up where it left off in the mapping?

Wow! That was awesome

Very Kewl Dale ....reminds me of A Scanner Darkly

Oh that’s cool

Very Nice !!

I subscribed ....and I'm watching the video !!

Great video, I just did my first flight mission and it went well but my m30t speed to start was so slow. How do you speed the mapping speed up? I tried to increase the speed in the mapping flight perimeters but it would default back to the slow speed. Do I have a settings issue or is my take off speed to slow. Can anyone help please.

What is IR super resolution and where is it?

I've heard of people having trouble accessing 10 bit in A-Log with the EVO 2 Pro V3. Can you confirm or debunk this?

how can i take screenshot?

Is this drone anything good

Video skips over text so that I have to keep pausing and rewinding which is a pain.

Point your antenna at the drone long ways…. You were pointing the antenna away from it and the video quality showed.

This weekend I flew the Evo 2 Pro Ent V3 in some stronger winds, with longer arms and larger motors you would hope it would perform better then an Evo 2 Pro V1. It did not, it would slow down and drop altitude and even gave me tilt warnings instead of wind warnings. They have not even programmed the FC good for the wind, this is terrible. They need to do a serious update for the FC. I've flown my Evo 2 Pro V1s in powerful winds that wanna knock you over, nothing can take that thing out of the sky, the winds yesterday were not even close to that strong and the Evo 2 Pro Ent V3 sucked badly. It took them till June 6th 2022 before they had the final FW update that gave us dual stability on the Evo 2 Pro V1 also, thats 2 years after the drone was released. So thats how long we might be waiting before they fix things with this one. I'm starting a drone company and I can't even do serious filming with this drone because the dual stability is what got the Evo 2 Pro V1 real close to the Mavic, as far as smooth flying for filming goes. So at this time if I was doing serious filming, I would still actually be using my Evo 2 Pro V1 drone. Autel is focused on making money pushing the Evo Max 4T now and other products and is taking their time with this drone poeple spent 5K of their hard earned money on. And lastly, can we please stop beating around the bush with these useless accessories and make a drop arm like we know that that's what everyone wants. Can someone who knows electronics please rewire one of those useless accessories they give us and make a drop arm. I would be willing to pay handsomly for one.

This weekend I flew the Evo 2 Pro Ent V3 in some stronger winds, with longer arms and larger motors you would hope it would perform better then an Evo 2 Pro V1. It did not, it would slow down and drop altitude and even gave me tilt warnings instead of wind warnings. They have not even programmed the FC good for the wind, this is terrible. They need to do a serious update for the FC. I've flown my Evo 2 Pro V1s in powerful winds that wanna knock you over, nothing can take that thing out of the sky, the winds yesterday were not even close to that strong and the Evo 2 Pro Ent V3 sucked badly. It took them till June 6th 2022 before they had the final FW update that gave us dual stability on the Evo 2 Pro V1 also, thats 2 years after the drone was released. So thats how long we might be waiting before they fix things with this one. I'm starting a drone company and I can't even do serious filming with this drone because the dual stability is what got the Evo 2 Pro V1 real close to the Mavic, as far as smooth flying for filming goes. So at this time if I was doing serious filming, I would still actually be using my Evo 2 Pro V1 drone. Autel is focused on making money pushing the Evo Max 4T now and other products and is taking their time with this drone poeple spent 5K of their hard earned money on. And lastly, can we please stop beating around the bush with these useless accessories and make a drop arm like we know that that's what everyone wants. Can someone who knows electronics please rewire one of those useless accessories they give us and make a drop arm. I would be willing to pay handsomly for one.

I have always preferred Autel drones because they make the most advanced drones. But Autel has also been putting out incomplete drones, where features are not working as advertised. I have recently bought an Evo 2 Pro Enterprise V3. I have a few hundred flights and understand a little about frequencies and antennas and I will explain here to dissolve any confusion about those things. I have lots of experience with the Evo 2 Pro V1 as I have 2 of them and have done lots of comparing and troubleshooting over the last couple of years with them. The Evo 2 Pro E V3 which should have a 15km transmission I just got barely transmits as good as my Evo 2 Pro V1's, which have a 9km transmission. When you go to the transmission screen on the new Evo 2 Pro E V3, there are no options, the screen is empty, Autel has explained to me this will be done at some update, it has now been 5 months since the drone's been released. The drone is very obviously working on a 2.4Gz signal, that is a short wavelength and should have a 2 inch antenna, just like most all drones up till now. The reason the transmission is barely keeping up with my Evo 2 Pro V1s, is because they put a 4 inch antenna, which is optimal for 900Mhz frequency. 900Mhz Is a longer wave that goes better through walls, when they do the update this will be an amazing drone yes, for now, if you've had an Evo 2 Pro V1 in the past, you will feel quite dissapointed. I do get real flight times of a little over a half an hour compared to 25 minutes which everyone always exagerrates, so Autel did real good there yes. So Autel put out a new drone with supposed frequency switching, but it's not doing any of that yet and the antennas are optimized for 900Mhz, which the drone is not working on, because if it was working 15km with 900Mhz would be amazing in the city yes. Of course at 900Mhz you then get a slower waves, hence slower data transfer, so I'm not even sure if they can transmit data at 1080 at that frequency, I would be fine with 720 resolution at 900Mhz, I still see power lines good on the bright screen, right now it is 720, I can easily tell, they havent updated that either. Respectively, a 4.8Gz transmission or 5.8, would be optimas with about an even shorter antenna probably closer to 1 inch, with makes it easier to fit inside your cellphone as you go up with Ghz :-). This is a very disappointing thing that Autel is doing and I hope they do the update for the transmission soon. I paid 5k for this thing and that was one of the main reasons I bought it for. Autel has also released a new drone with something very important not working as advertised. They kept my drone in repair for weeks so I got my money back from Blue Skies, who I bought it through. I then got the same drone through Amazon and found that the feature is not working on that one as advertised either. I have considered sueing Autel but I have always liked and supported Autel, and would prefer not to do this. If Blue Skies does not end the bank case against me I will tell everyone here what this feature is a lot of people would be upset, and I would hurt Autel, I would prefer not to do this. I hope they do an update to fix this soon.

I have always preferred Autel drones because they make the most advanced drones. But Autel has also been putting out incomplete drones, where features are not working as advertised. I have recently bought an Evo 2 Pro Enterprise V3. I have a few hundred flights and understand a little about frequencies and antennas and I will explain here to dissolve any confusion about those things. I have lots of experience with the Evo 2 Pro V1 as I have 2 of them and have done lots of comparing and troubleshooting over the last couple of years with them. The Evo 2 Pro E V3 which should have a 15km transmission I just got barely transmits as good as my Evo 2 Pro V1's, which have a 9km transmission. When you go to the transmission screen on the new Evo 2 Pro E V3, there are no options, the screen is empty, Autel has explained to me this will be done at some update, it has now been 5 months since the drone's been released. The drone is very obviously working on a 2.4Gz signal, that is a short wavelength and should have a 2 inch antenna, just like most all drones up till now. The reason the transmission is barely keeping up with my Evo 2 Pro V1s, is because they put a 4 inch antenna, which is optimal for 900Mhz frequency. 900Mhz Is a longer wave that goes better through walls, when they do the update this will be an amazing drone yes, for now, if you've had an Evo 2 Pro V1 in the past, you will feel quite dissapointed. I do get real flight times of a little over a half an hour compared to 25 minutes which everyone always exagerrates, so Autel did real good there yes. So Autel put out a new drone with supposed frequency switching, but it's not doing any of that yet and the antennas are optimized for 900Mhz, which the drone is not working on, because if it was working 15km with 900Mhz would be amazing in the city yes. Of course at 900Mhz you then get a slower waves, hence slower data transfer, so I'm not even sure if they can transmit data at 1080 at that frequency, I would be fine with 720 resolution at 900Mhz, I still see power lines good on the bright screen, right now it is 720, I can easily tell, they havent updated that either. Respectively, a 4.8Gz transmission or 5.8, would be optimas with about an even shorter antenna probably closer to 1 inch, with makes it easier to fit inside your cellphone as you go up with Ghz :-). This is a very disappointing thing that Autel is doing and I hope they do the update for the transmission soon. I paid 5k for this thing and that was one of the main reasons I bought it for. Autel has also released a new drone with something very important not working as advertised. They kept my drone in repair for weeks so I got my money back from Blue Skies, who I bought it through. I then got the same drone through Amazon and found that the feature is not working on that one as advertised either. I have considered sueing Autel but I have always liked and supported Autel, and would prefer not to do this. If Blue Skies does not end the bank case against me I will tell everyone here what this feature is a lot of people would be upset, and I would hurt Autel, I would prefer not to do this. I hope they do an update to fix this soon.

That was a bit shit

Just bought Autel drone with the V3 controller. And I can't find where you control the screen brightness. Can you please help my ignorance? Thank you Byron

Is this Fifish captain app available on iOS? As can’t find it in the App Store.

is it possible to mount the robotics arm on the V6 as well or only on the V6s?

I did the instal but remote will not open close the arm...?

30t vs matice 300?

Hi, What can you tell me about the geofencing feature (NFZ) inserted on the firmware of the EVO 2 V3, that work in a "advisory" way now with pop windows warning you about restricted areas, but can go to "mandatory" at any time preventing flying like DJI's drones?. Thanks

Appreciate this! Way more user friendly then the manual that came with

Hello, just purchased the Fifish V6 and have everything set up except for one problem, unless Im not seeing something, App works, lights, camera, however everytime I push the lock/unlock or start button, all the thrusters come on fully and will not shut off until I push the lock button again, what is wrong? Another guy on CZcams put up a video of the same problem.

Just got the Evo 2 Pro Enterprise V3 drone. When you take off it takes about 2 seconds to hover like 5 feet, it goes up fast. When you land this drone it hits the grounds a little hard, and bounces off about and inch or two. It does not land smoothly like my other Evo 2 Pro V1 drones. Autel tells me its behaving the way it should. The FC for this drone is very primitive right now, I will be very careful with it until Autel makes updates to the FC. No one shows a video of this drone landing. I dont think its good for it to land that way. Right now it only has 4 filming modes and when you look at the transmission menu the screen is empty and doesnt talk anything about frequencies, Autel informs me this will be with future updates.

Just got the Evo 2 Pro Enterprise V3 drone. When you take off it takes about 2 seconds to hover like 5 feet, it goes up fast. When you land this drone it hits the grounds a little hard, and bounces off about and inch or two. It does not land smoothly like my other Evo 2 Pro V1 drones. Autel tells me its behaving the way it should. The FC for this drone is very primitive right now, I will be very careful with it until Autel makes updates to the FC. No one shows a video of this drone landing. I dont think its good for it to land that way. Right now it only has 4 filming modes and when you look at the transmission menu the screen is empty and doesnt talk anything about frequencies, Autel informs me this will be with future updates.

Hello, Is this new version of the EVO II pro CE-certified-class for the European market ?