- 15
- 1 959
Lake Mountain 3DPrinting
Registrace 17. 12. 2023
Just starting this, so bio will be updated as I grow. I do prototyping and product development and store to sell what I manufacture. Product line up that store will carry is a work in progress. So far I just carries stuff I either designed and printed for myself or my wife to use.
M18 Magnetic Battery Boot Battery Case for Milwaukee M18 XC 4 0, XC 5 0
lakemountain3dprinting.com/products/m18-magnetic-battery-boot-battery-case-for-milwaukee-m18-xc-4-0-xc-5-0
Fits Milwaukee M18 RED LITHIUM XC 4.0, and Milwaukee M18 RED LITHIUM XC 5.0, batteries. This allows you to place tool and or battery on magnetic surfaces out of the way while working, and gives the battery some extra protection. I designed this for my own tools for my full time job as an Automotive Tech.
This doesn’t include battery, or tool.
Hand tighten screws, don't over tighten
Fits Milwaukee M18 RED LITHIUM XC 4.0, and Milwaukee M18 RED LITHIUM XC 5.0, batteries. This allows you to place tool and or battery on magnetic surfaces out of the way while working, and gives the battery some extra protection. I designed this for my own tools for my full time job as an Automotive Tech.
This doesn’t include battery, or tool.
Hand tighten screws, don't over tighten
zhlédnutí: 4
Video
Tool holder for Milwaukee M18 Tools
zhlédnutí 37Před 21 hodinou
lakemountain3dprinting.com/products/tool-holder-for-milwaukee-m18-tools I designed this to hold 1 M18 Milwaukee tool, ether inverted or side ways. This is 3D printed in orientation for strength and I used PETG for better later adhesion and thermal resistance. Does Not Come With Tool
M12 Magnetic Battery Boot Battery Case for Milwaukee M12 XC 3 0, XC 4 0, XC 6 0
zhlédnutí 107Před 2 měsíci
Fits Milwaukee M12 RED LITHIUM XC 3.0, Milwaukee M12 RED LITHIUM XC 4.0, and Milwaukee M12 RED LITHIUM XC 6.0 batteries. This allows you to place tool and or battery on magnetic surfaces out of the way while working, and gives the battery some extra protection. I designed this for my own tools for my full time job as an Automotive Tech. This doesn’t include battery, or tool. Use link to purchas...
M12 Magnetic Battery Boot Battery Case for Milwaukee M12 High Output XC5 0
zhlédnutí 50Před 2 měsíci
Fits Milwaukee M12 High Output XC5.0 battery. This allows you to place tool and or battery on magnetic surfaces out of the way while working, and gives the battery some extra protection. I designed this for my own tools for my full time job as an Automotive Tech. This doesn’t include battery, or tool. Link to where you can purchase: lakemountain3dprinting.com/products/m12-magnetic-battery-boot-...
Magnetic Battery Boot, Case for Dewalt 20V 2 0Ah Battery
zhlédnutí 16Před 2 měsíci
Fits Dewalt 20V 2.0Ah Battery. This allows you to place tool and or battery on magnetic surfaces out of the way while working, and gives the battery some extra protection. This doesn’t include battery, or tool. Use link to purchase: lakemountain3dprinting.com/products/magnetic-battery-boot-battery-case-for-dewalt-20v-2-0ah-battery
Battery Holder for dewalt 20v Max Batteries
zhlédnutí 18Před 3 měsíci
lakemountain3dprinting.com/products/battery-holder-for-dewalt-20v-max-batteries This is a 3d printed battery holder I made to keep batteries out of the way and organized. This is printed from PETG. Does Not Come With Battery.
Magnetic Battery Holder for Dewalt Batteries
zhlédnutí 35Před 3 měsíci
lakemountain3dprinting.com/products/20v-max-magnetic-battery-holder-for-dewalt-batteries This is a 3d printed magnetic battery holder I made to keep 20V Max batteries organized. I also made a Heavy Duty version for batteries weighing more then 1 pound, 10 ounces. This is printed from PETG. Does Not Come With Battery.
Pick Tool Organizer, Magnetic
zhlédnutí 35Před 4 měsíci
This is an organizer I made for either my Snap-on or my Cornwell pick set. Since my original trays that came with these sets have long since disintegrated. This has magnets in the bottom to help keep it from moving around in a drawer or cart. This is 3D printed from PETG plastic. Does Not Come With Picks. lakemountain3dprinting.com/products/pick-tool-organizer-magnetic
M18 Battery Holder for Milwaukee Batteries
zhlédnutí 231Před 5 měsíci
lakemountain3dprinting.com/products/m18-magnetic-battery-holder-for-milwaukee-batteries lakemountain3dprinting.com/products/m18-battery-holder-for-milwaukee-batteries
Case for TPA3116D2 Mono Amplifier Circuit Board
zhlédnutí 490Před 5 měsíci
This is a 3D printed case for TPA3116D2 Mono Amplifier Circuit Board. This is printed in PETG for a bit more heat resistance then the standard PLA plastic. THIS DOES NOT COME WITH AMP CIRCUIT BOARD. Case comes with four 30mm M3 screws and a knob. lakemountain3dprinting.com/products/case-for-tpa3116d2-mono-amplifier-circuit-board
Triple Square Magnetic Socket Organizer
zhlédnutí 108Před 8 měsíci
lakemountain3dprinting.com/products/triple-square-magnetic-socket-organizer-holder I made this for a Triple Square socket set I bought from Matco Tools. Has 4 socket openings for 22.5mm on diameter, 1 socket opening of 20.5mm in diameter, and 4 socket openings of 18.5mm. This is 3D printed from PETG. This can magnetically stick to magnetic surfaces from the bottom and the back and magnetically ...
Magnetic Long Hex socket Organizer For Most Long Metric Hex Sets
zhlédnutí 267Před 8 měsíci
lakemountain3dprinting.com/products/magnetic-long-hex-socket-organizer-for-most-metric-sets This is a 3D printed magnetic organizer I made for my Harbor Freight long metric hex socket set. I also can fit the Cornwell Tools long hex set into this and it works. This is printer using PETG filament.
Socket Extension Holder Magnetic Extension Organizer
zhlédnutí 122Před 8 měsíci
lakemountain3dprinting.com/collections/tools This is a 3D printed magnetic extension holder for 1/2 inch socket extensions. Has powerful magnets allowing it to stick to vertical metal surfaces. I printed this in PETG plastic for more heat resistance then the typical PLA plastics used in most other 3D printed items you’ll find. This is currently a side job for me. I work as an Automotive Tech an...
Drill Bit Sharpener Attachment
zhlédnutí 84Před 8 měsíci
lakemountain3dprinting.com/products/drill-bit-sharpener-attachment-rotary-tool-118-degree-bit-sharpener-135-degrees-sharpener Drill Bit Sharpener Attachment Rotary Tool 118 degree Bit Sharpener 135 degrees Sharpener Sharpens at the correct angle. This is 3d printed attachments for rotary tool, to sharpen drill bits. Comes with both 118 degree and 135 degree attachment. Unlike the others this sh...
M12 Magnetic Battery Boot
zhlédnutí 367Před 8 měsíci
lakemountain3dprinting.com/products/m12-magnetic-battery-boot-battery-perspective-case M12 Magnetic Battery Boot Battery Perspective Case for Milwaukee M12 XC 4.0 I design for MILWAUKEE RED LITHIUM XC 4.0. This allows you to place tool and or battery on magnetic surfaces out of the way while working, and gives the battery some extra protection. I designed this for my own tools for my full time ...
Does the magnets not damage the battery
Batteries are fine with the magnets. I asked myself the same question when designing this is fusion 360 and googled and read a few different sources which all agreed that it shouldn't hurt the batteries, and after having them on my M12s I can confirm it's fine.