- 14
- 28 160
Sound Check Studio GH
Registrace 10. 08. 2022
This platform is purposely for creativity and education about live sound and production.
WHAT IS COMB FILTERING & FREQUENCY CANCELLATION.
In this video, I'll show you what frequency cancellation is and how it behaves. Then I'll explain what comb filtering is, what it looks like, and how it sounds. Please subscribe to my channel for more videos like this. Thank you!
zhlédnutí: 88
Video
TESTING DBX DRIVERACK PA2 USING SMAART
zhlédnutí 630Před měsícem
Hello in today's video, I am testing the dbx DSP to see its accuracy and how well its functionality works. I know this video took a while to get out, but I hope you learn something new from it. Please subscribe to my channel for more videos like these. Thank you.
HOW TO SET GAIN PROPERLY IN DIGITAL MIXER
zhlédnutí 250Před měsícem
In this video, I will show you how you can set up gain structure properly in a digital mixer. If you want to learn more from me, you can contact me on 233574407447 And please subscribe to my channel for more great videos like this one.
HOW TO SETUP ASHLY DIGITAL SIGNAL PROCESSOR
zhlédnutí 290Před měsícem
In this video, I'll show you how to program your Ashly DSP. The Ashly is a powerful piece of equipment that can help you create a great sound for your live performances. It's got a lot of features and settings, but I'll walk you through the steps of getting started. If you have any questions or want to learn more, please don't hesitate to contact me 233574407447 Also, please subscribe to my cha...
AFTER YOU HAVE CROSSOVER YOUR TOPS AND SUBS SPEAKERS, SEE THE PROBLEM.
zhlédnutí 3,2KPřed 5 měsíci
This video is to educate you on how after crossing over your drivers, you loose some energy at the crossover region. am using the measurement software call smaart to demonstrate for you to see how critical it is. am all about given you little tricks to live sound. subscribe to my channel.
THE TRUTH ABOUT PEQ SOUND ENGINNERS SHOULD KNOW
zhlédnutí 624Před 5 měsíci
I did a video about GEQ, now this is another test for PEQ using measurement software call Smaart to see if truly PEQ is something decent to use in system tuning or for mixing. enjoy this video and please subscribe to this channel, if you want to donate something please leave a message at the comment section, Thank you.
WHAT YOU DID NOT KNOW ABOUT GRAPHIC EQ AS ENGINEER
zhlédnutí 2KPřed 5 měsíci
This video gives you a little education about GEQ using the measurement software call smaart, that you didn't know the behavior and how responsive Graphic EQ is. watch this video careful and know how to use this gear careful when using it. but I will advise don't use GEQ for system tuning and optimization off your PA system, but instead use Perimetric EQ for that job. thank you. any donation to...
STEP BY STEP TUNING DBX DRIVERACK PA.
zhlédnutí 11KPřed 6 měsíci
Having problem with your DSP? here is a quick video to walk you through on how to tune your speaker using DBX Drive rack PA. thanks for watching, please subscribe to my channel and like the video for more videos like this.
Miss Gina Live Worship
zhlédnutí 144Před 7 měsíci
Worship the Lord your God with all your heart. Yahweh, the creator of Universe.
How to train your ears, and understand frequencies
zhlédnutí 146Před 9 měsíci
how to train your ears and how to understand frequencies.
How to mix your Backing Vocal using Reaper
zhlédnutí 72Před 10 měsíci
This project was a recording from a church, the singers were not on point. but getting something out of it is the purpose of this video. 25 subscribers, please keep subscribing and like the video after you have watch it. Thank You
How to Mix your Multitrack using Reaper
zhlédnutí 142Před 10 měsíci
This tracks was recorded outside of an event, am tuning the instrument and vocal and mix it. watch the full video to get full understanding about this project. subscribe to my channel and like this video so I can do more videos. incase you want me to do any video about sound leave it in the comment.
Thank sir, I'm now learning sound and I won't to know more, can I have your number so that I can contact you personal
@@AyehSamuel-gx7br +233574407447 Kenneth
Big energy
Well explained Boss
So please after the settings everything Wil be stored even when you switch it off and on it
@@user-vd1zk8ve7h Yes, every settings will be stored
that happens when you use the same filter !!
This DBX Seems to work fine, I dont see anything wrong, But learning is allways good :) Lowcut is to protect top speakers without sub, I guess the roll off frequenzy is at - 3 db so maby around 75 hz A 31 band eq has typ a q (how steep it cut or boost) of 4 +- again thats about 0,4 of an octave, an octave is half/double in frequenzy, eq 100 hz, one octave up is 200, one octave down is 50 Most if not all filters and eq's on std gear works by making fase shift, thats the princip The trick is if you eq before the filter of sub and high, the fase shift on sub and high is the same meening difference in fase between high and low is 0, så no sound problem. If you have sub on you can Lowcut protect Them by using the 20 and 25 hz slider, you can measure it yourself just remember a given cut freq is at - 3 db Have fun 😊
@@orlarieper6175 thank you sir for the top up
Great job, 😊
@@enchanter976 Thank you sir
You are not sure what you are doing
@@sansaechao6298 As In
Bro, many thx for ur effort and sharing on this . Appreciated it
@@hidewong You welcome bro. ❤️
Thanks I hv leaned alot, what is the use of the button named others.
You welcome. The others is for customs settings as well you can patch things in advance there
Share your smaart software to me by mail ❤
@@krishnajadhav7836 please it can't be shared. You need to purchase it from their website
Which software used for this can you share plz ??
@@krishnajadhav7836 I used smaart for this. Visit www.rationalacoustics.com
Is it balance left and right
Hi, When you source the output due to how send the signal output of your mixer to the input of this DSP, all you will do is to source from the Right channel of the input and your will get your balance L&R. So in the video the input of the DSP was coming from A&B so A is my L and B is my R
thanks bro pls do u do training for people who wants to learn
Yes Please i do online classes By video calling. You can Whatsapp me on +233574407447 we talk about pricing and we start.
I want to set my dbx for live band, but when I tried the kick was passing through the tops
Is not bad for a kick passing through your Tops. Kicks have high frequency formation as well. Should Incase you want more teaching ideas, contact me on +233574407447 let talk about pricing and I will teach you what you need to no.
Hi
Hello
Bro I’ve been trying to understand and read phase for the longest time, I finally understand it. Thank you!
You welcome sir.
I understand this now
How can I get ur Whatsapp contact boss?
+233574407447 kenneth
@@samuelkennethacquah10681:29 1:30 1:31
Why you don't use subharmonic?
Many people uses it but I said I personally don't use it. Read in the manual what's the functions of subharmonic synthesizer
Hey can you make a video doing connection and set software
Please about which connection
@@samuelkennethacquah1068 like how to connect your mixer to your audio interface and then to your PA system how to set up your software
Okay sir I will look into that
@@samuelkennethacquah1068 really appreciated waiting for your video ❤️
Yes please
Well done bro.i came across your channel not long ago and I must commend you for the good work. I would like to add another perspective to this conversation not to refute your video, but for us to exhaust the topic thoroughly. 1. Physical limitations. In other to split the entire frequency range within 31 bands on a physical device, there's bound to be some compromises . It is physically impossible to add a center frequency(Q) on each band on a GEQ. So, the bands not being exactly on the predetermined frequencies or changes affecting neighboring frequencies are to be expected. Putting steep notch filters on a GEQ wouldn't serve any practical application in my opinion, that's the work of a PEQ. GEQ is meant for broad stroke applications. 2. Brand/Quality. The quality of components used by a particular manufacturer within the device goes a long way to affect how the device functions. All these zongo lane/china devices we have in Ghana are wack. A good brand will always serve you better. 3. Phase. Phase shift is an unavoidable side effect of EQ, unless of course you use a linear phase EQ. As how drastic the phasing is will depend on how well the the device was manufactured. Since GEQs are minimum phase EQs, it is the manufacturer's duty to ensure that the device does exactly that, so as not to introduce any nasty problems within the phase domain. AD/DA. I believe the converters of your audio interface should also be taking into account within the context of the test. How much color is it imparting to the signal. In conclusion, I personally believe that we should be able to make use of whatever is at our disposal as audio engineers to make something happen. I'm sure you've pulled out some fantastic shows with some mediocre equipments in the past. The most important thing is to know your craft inside out. I have subscribed to your channel! I'd like to be a part of your success on this platform..... peace✌🏼
Thanks mate for the addup and further explanation. Peace ✌️
@@samuelkennethacquah1068 you're welcome bro. You'll be seeing more of my comments on your videos just to create conversations around the topics for the algorithm... ✌🏼
That will be cool
can we get a WhatsApp group bro?🙏
Okay bro i will look into creating one.
@@samuelkennethacquah1068 please can I hav your contact
Thank you for your teachings. But i have some questions. 1) which are the best preset channels to use in 3 ways and 2 ways settings? 2) which are the best filter frequencies to use in your low mid and high? 3) while setting your PEQ, what's the function of the F1, F2,F3, and F4. and how can you determine the right DB, the right BW and slope?. 4) In setting your crossover, what's the function of the slope. I mean, what does the do, or the effect of the slope. If i cut the slope, what will be the output. And if the slope is not cut, what will the output be? 5) What's the right frequency to use in setting a live band?
am sorry to say all this questions always depends on the gears you are working with. saying something about all that is not right. where are you located?
I think ur tutorial makes me understand how to use a rack, previously I don't know how to go about it but with the video,I think I can start something better than b4
That's good
Some people use the driverack at the same time equalizer n crossover,I asked and they said, the rack alone can not boost as loud as they want. How true is that bcos I ever saw some people use only the rack n amplifiers and they really play louder than those people do.
We use only the DSP, because it have built in crossover and EQ as said it n the video. Since they don't no how to config it well that's what they will say
Keep it up sir
Thangs you.
Welcome
can i get your contact pls
Hi brother are the defult settings good on the driverack? just want to know because i dont want to change anything
Hello. It depends on your Speakers that you have, remember crossovers,EQ and delay is included. You can switch between presets if one works for you, that will be cool.
Thanks bro
@@selectorcj2370 You welcome
Nice information. Can you create detail video for AGC in input and output in DBX 260?
Will look into it
Can you use only the driverack without a crossover
Yes please. When you use the Driverack theirs no need for External crossover, Graphic EQ, Compressor or limiter. The DBx driverack have all this built in. And remember is a digital Gear
❤ thank you Sir
You welcome
Please can i have your number
Dbx driverack pa 2 setup
You want a video about that one?
gr8 video ✅
Thanks sir
Hello please How do you route reaper signal on Smaart or Smaart to Reaper?
Hello! You can do that by using two computers and two audio interface. But if you have only one am sure what am going to say will be understandable for you. Smaart have two out for sending signal out. I used only 1 output from smaart, and in Reaper I activated the input to listen to the input of the reference signal. After I send only 1 mono signal from reaper to my audio interface output. Remember I used only 1 output from smaart. So the output of reapers comes in as my measurements microphone that's is input one. I no is confusing, but that's how I did it.
Pls what's the name of the software you are using in the system?
The name of the software is Smaart. U can visit www.rationalacoustic.com for it.
Do u have a class for teaching
@@vibehealth6828 i do online classes. Depends on what you want to learn
@@samuelkennethacquah1068 Online ? How do you cater fr the practical sessions
Why you impulse respond so long?
Hello, I said it in the video that, I did a nasty routing before I can bring this video up. Am sending signal from smaart to my DAW and I return it from my DAW to Smaart using same PC. So that's end up with that time. But I was glad it was in time.
thanks bro
You welcome
PLEASE ADD YOUR CONTACT
Sorry we can see the display on lead please zoom the camera open thanks
Hello Nelson thanks for your comment. I was hoping to capture the switches and the screen at same time, so you will no where I press for that popup on screen. Will try to zoom in for you next time, thanks
How to make the 260 work 6 way i want to use the 6 channel to play different signals
Hello Mark. You can let the output from 1 to 6 for individual speakers. You will press and hold on the config bottom, in that procedures u can let each output be mono by unlinking 1 and 2 and 3 and 4, 5&6 is already unlinked. And I think you can do this at the I/O section but unless I look through it before I can give you more details
Great
Hello 👋 can you please help me,say i have a guitar with a frequency range from 64hertz all the way upto 12khertz,how wil i eq this can you advice me
Hello TechPzd, in most cases a guitar have a body from the low mid to the high mid. The guitar don't need a frequency of 64Hz remember Bass guitar and kick drums floor tom are heavily working at that frequencies. So I will advise you will put a high pass filter on the lead guitar. And make sure u cut some Mudd out should Incase you hear some. The mud start at 230Hz to 800Hz for lead guitars. And dont bright the lead guitar if not it will sound harsh and hard to listen, especially when he changes the tone to distortion. So focus on the mid and a little bit of High Mid, if theirs no problem at the low mid leave it.and always remember it is better to cut a little frequencies than boost many frequencies.
@@samuelkennethacquah1068 👍Thank you for the reply, I'm still a beginner in audio,can you tell me how can i know if a frequency is bad muddy,harsh etc.
For you to get the ears to hear everything I will tell you with time and constant learning. As u can rewatch the video again. Since I used pink noise and I sub group the frequencies. Use a good headphone to listen from time to time. You will understand it best.
@@samuelkennethacquah1068 Thank you,i already subscribed.
Right on man! Thanks 🙏🏻
Soon you will be popular here (CZcams)
Thanks bro 🙏
Nice one bro. How do you setup busses on reaper please? I’m new to reaper
On the left corner where your tracks line up from top to down. This is a little icon like a folder icon. Click on it once and that track becomes a folder you click on it again and become the last track in the folder click on it again and it becomes normal track. So if should Incase you want to create a group for your drums you have create a new track and put it Infront of your drums like Infront of the kick, then click on that empty track you created folder icon to be a folder. Now all the tracks that follow that folder will automatically pass through it before it gets to the master fader so let say you have your floor tom as the last drum channel click on the folder icon on your floor tom twice, which means it is the last in that drums group you created.
Thank you sir , I appreciate that
Good job. Well done
Good Work Acquah. Keep it up