Video

Halo. I like this. You can sold ? I think expensive. Thanks.

UM....don't cut the green wire.....UM.

I would never take advice from a guy who can’t hang a dam shelf level !

“Don’t do it in the rain” Jesus. You need to STOP NOW before your luck runs out.

Thanks!

The wire used to connect neon tubes is 100% silicone and can withstand 15,000 volts at 50 hz 60 miliamps...called G T O wire any sign company can help you out

How many Darwin award winners from this foolish hobby?

Please watch some videos on kruger dunning effect. It is VERY educational.

I really don't think you should be doing a video like this when you clearly don't have enough knowledge. The electrician who advised you also doesn't know enough. This art is EXTREMELY dangerous and requires much more safety than what you have provided. The most obvious ones are using an extra 2 dead man's switches which you hold in your hands and an enclosure over the transformer with a power light on it. The foot switch you have isn't enough as you could potentially land on it whilst been electrocuted. What is disturbing is how many people watching will copy your machine and feel happy using it with minimal experience. Highly qualified electricians have died conducting this art.

Interesting seeing the comments. Some are educational, but the ones that say " you're playing with fire", "this is dangerous", etc are pointless. It's like- thanks for letting everyone know electricity is dangerous.....i wouldn't have guessed....

150 foot of tubing along not including everything else like a microwave and 8 gage wire ect. Less than 100 bucks??

This is the thing that kills people but you're not trying to promote it in any way! 😮😮 Not a joke and not funny it's fkin dangerous!

Do you do electrocutions on the side. All you need is one of your machines and a deck chair.

The black wire is the hot wire and the white is the neutral. It's AC, not DC where the black wire is negative.

Anyway, I can buy some of that piping that you said that comes in like 150 yards from you

Thanks!

Good to see that Darwinian theory is still being practiced.

Wow it looks so beautiful. I need to try it too. I'm scared so I'll have to watch your video very carefully though i dont understand much of it😅

I worked on high voltage valve equipment as a younger man and I'm telling you straight, I would NOT operate this device, the potential for self harm is outstanding. Using a wood screw into wood to clamp a connection is only the start. Please do not be insulted but be safe, this stuff will kill you and then cook your remains.

Hey bro, be VERY CAREFUL ❗.A friend of mine lost her son trying wood frackin', and was electrocuted, he was only 14 yrs. I use to do it back in the early 1970's, but I KNEW EXACTLY what I was doing. I was only 10 or 11 yrs old at the time. And emphasize this, IF YOU/THEY THINK THEY KNOW, THEN THEY DON'T. Remember that a 'microwave' transformer can generate upwards of 20,000 - 30,000 volts, and the current will be DEADLY‼️. 🥺🥺🥺🤠🤠

Dude, take yourself on an electronics course, learn the basics of circuitry and electrical engineering, and don't touch this thing until you understand just how lethal that contraption is.

czcams.com/video/vAXgDICPGLo/video.html burner in black box!!!!

Neon power supply would be much better than a microwave power supply. 10-30 kv wire is a must.

SANYO 2M17 RiGH VOLTAGE CAUTION MICROWAVE RADIA'TION 3J 30 PERSONNEL O7OHS NOT BE EXPOSED TO THE MICROWAVE 5 WHICH MAY CE IF IMPROPERLY RADIATE FROM THIS USED OR CONNECYED ALL INPUT AND CUTPUT MICROWAVE CONNECTIONS WAVEGUIDE FLANGES ONV OASKETS MUST eE LEAKPROOF NEVER OPERATE THIS DEVICE WITHOUT V MICROWAVE ENERGY ABSORBING LOAD ATTACHED. NEVER LOOK OINI AN OPEN WAVEGUIDE OR ANTENNA WHILE THE DEVICE IS ENĚAGIZED R12DRY KOGIA & >2 nBEG AP EIML 3 et 2 "722>27e VRANL P STE AO-IRFIOL OTE 1882045 DANGER DSCONNECT THE BLECTRIC POWER BEPORE GERVICING MAGNET KEEP THIS MAGNETRON AWAY FROM FINE MAGNETIC MATERIALS. I want to use this to build mine . Is it possible and how?? Please and thks

Black is hot in AC my friend.

Dumbest thing ever done. Medic here, I've seen one fatality and one very serious disabling burn in the last 3 years from this stuff. DO NOT DO THIS.

The screw in the wood is not a smart connection but all it all nice set up

10 000 watts? Are you sure you mean watts and not volts? Because, on a 2-phase 220V electrical line that would draw 45 Amps. I doubt that a piece of wood can draw 45A.

Thanks for sharing how to make fractal device. Going to make one for upcoming project. I have a question, what you use to wet the wood ??

that's a good tip, I use that too until I started putting painters tape on top of the clamp rail before I glue up, that prevents having to clean them as often.

what is the mix ratio of baking soda and water, I am looking to do this in a few months when I retire. I have been a welder for many yrs, have done electrical work all my life and woodworking is a lifelong hobby as well as shooting. Im looking to do gun stocks for a first project.

How many deaths need to happen before people figure out how nuts this is? 2 of the 35+ deaths were of experienced Electricians. Check out Mary Calhoun’s before and after burn injury pics if you have a strong stomach. 2000 volts, same as an electric chair. I’d say if there’s a point of diminishing returns on internet hacks this is it.

You clearly don't understand how electricity works, so you're definitely not the guy who should explain this to others. Some points: Switching live and neutral wire colors (though polarity doesn't matter in this case. Not understanding why there's a return path connected to the transformer HV side. Choose this wire cause the electrician said so. Screws connected to HV GND on the transformer possibly in contact with your metal workbench, which then also becomes dangerous to touch. Remember that GND will still be floating (not at 0V) and this case still lethal. etc. etc. You would do well to remove this video cause people in the comments are already copying this jank device, and possibly hurting themselves. Coming from an Electrical Engineer.

Ordinary rubber gloves are not high voltage rated rubber gloves. The transformer belongs in a properly rated plastic enclosure. The ethical thing to do is discourage people from this unimportant use of dangerously high voltage because it's just for making decorations. There are plenty of ways to play with wood but burning for some reason fascinates adults who should know better than to want this dangerous foolishness. Not everything cute is wise and the woodworking world did fine for thousands of years without it.

👍

❤

czcams.com/video/vAXgDICPGLo/video.html

I wish I lived near you, maybe I do lol, who knows, but I would modify that setup for free, just to make it safer for you. But thank you for showing and ignore the negative comments. I worked at steel mill for years, so my life was at risk everyday and I chose to do it. But I would much rather risk my life to make something beautiful than live in a protected box my whole life. Thank you again.

Sir....my neighbor and their family just buried today their 23 year old grandson, who is an electrician, because he was doing this.procedure in his garage making a Christmas present. His death is devastating to this whole area. Why would you do such a dangerous practice especially since you have children. Don't make them have to bury you. It's horrible

I loved the video, brother. Have been intrigued by this method of wood burning and have been wanting to learn. Looks a bit intimidating. I subscribed to your channel, and I am looking forward to seeing more. One thing u didn't answer, tho. Where exactly did u get the 8 gauge wire? U said don't buy your run of the mill hardware store 8 gauge. Did u buy it from an electrician? Keep up the great work, brother.

Black wire is your hot wire

wow so i am assuming you hold those electrode leads in your hand when the burner is energized? Wow amazed you are still alive. The only safe way would be to clamp the electrodes to the wood, go back 20 or so ft and power the leads using a 2 handed dead mans switch. Then maybe it is safe.

Electricity is never safe and like guns should be treated with respect

Yes hell

I am an experienced engineer, and your setup and instructions are pretty safe. Engineers tend to complicate safety. But you cannot over-emphasize safety in this configuration. A microwave transformer is a death machine and can kill you. You are a good instructor.

Wha.. wh...what wh huh?!🤔🤨 wuh WHAT THE FLIPPN WASTE OF TIME WAS THAT?! (puny lil pooter sound in the far rear corner of the room .. yes, it was Phil, as usual, yes, the president and CEO of this here material) Thanks Phil

This is a good video but it makes me nervous because you don’t have a good understanding of how and why your burner works.

Just wrap the rope of those polypropylene tubes with electrical tape.

My burner has been cutting out (loosing power) after a short period of burning. The wires are all good & it doesnt seem to be getting too hot or anything i have noticed. Any suggestions as to why I am loosing power?

Can we use welding machine?