Video

Fel Pro shows a different part number. Also amazon shows that part number your using doesn’t fit. 2005 wrangler rubicon 4.0

Good instruction. Thanks for not blasting me with heavy metal.

Quadratic makes a winch plate for the YJ that fits

Looks great!

Swap that battery w AGM asap😂

Great video. I have a 1993 wrangler and my problem is that the button on the inside won’t push to the lock position. It may just need to be taken apart and freed up because it used to work. Thank you for this video it definitely was educational.

Great video. Thanks for keeping it simple 🤙

I loosened all the bolts and it seems stuck on there I think the last bolt is the one im trying to figure how much do I have to loosen for the belt to break loose

Great video! I've also been without a parking brake on my 91 the 4+ years I've owned it. Super annoying! A previous owner swapped in a Ford 8.8 rear end with disc brakes and I don't know if the parking brake ever worked since then. Yesterday, I swapped all 3 cables and then dug into the rear brakes to check the status and clean them up. Things are kind of old and worn on both sides and after a few adjustments and testing, the parking brake still wouldn't hold. So, I have all the parts on order to redo the back brakes, including the parking brake shoes. I also found out my YJ never had the recall done to replace the parking brake pedal. So, literally, the only thing I can reuse is the adjuster that you replaced in this video! Enjoy your parking brake - I hope to have mine working in the next week or two.

Nice job as usual.

Gr8 video!!

Good day family and four wheel drive.

Nice work

Hey I know this is somewhat of an older video but is this all I need to extend my break line? I’m getting a 2.5” lift and I’ve never done break lines before. Thanks

Hey what size wrench the rear brake lines on the axle?

Thank you for sharing sir.

Wish they made one with an electric compressor especially for those of us that do not have room for a belt driven AC compressor.

I am running the same wheels on my '93 YJ. what size tires are those?

If it a works well for you I'd like to get one for my 03 TJ.

Thanks for the video. I will use it to help, when I install one on my cj7.

What size belt did you get mine seems to be not getting tension

you sure are chatty aren’t ya

Thanks for posting this! I have this exact kit and I have been dreading/procrastinating installing it. This video should be a big help! 😎

Any rattle from the top right side, since there's really nothing holding it closed?

Oh man the YJ has always been my favourite Wrangler 😎🤤

That's the lift I have on my 93 but I have a Ford 8.8 rear diff. It's a little spongey but not bad

Lame

I really want to install this in my 2.5

New to the yj thanks for the vid. Mines a 90, so curious if its the same bracket . I hope this is my issue aswell i really dint feel like doing drums right now 😁

Where did you purchase the kit?

I just pop and lift the air cleaner box out of the way to get to that lower (and upper) back bolt

Have an 88. Just ordered these yesterday 😀! Can't wait. Great job 👍!

Sounds better!

Just installed badland winch on my jeep yesterday..... with my stock bumper . Love it. Forgot to connect the small ground wire from control box. Had to tear everything apart to connect it. All done. Love the winch.

Many thanks for your video. One tip. If your Jeep is facing slightly downhill while removing the seal, barely any fluid will leak out.

Cool video I’m feeling a bit lazy so I’m watching a bunch of videos on it while I’m working up the effort to go and actually do it 🤣 My XJ has a similar adjuster and then it’s a center console handle as opposed to the foot lever.

What’s the size of those tires?

Anyone happen to know the hose sizes? All of mine are so dryrotted. I am trying to replace all of them

Excellent video! I couldn't for the life of me figure how to get the tie rod off the darn pitman arm!! Life saver!

No i like my swing out HOWEVER the lower down is nice too NOW IM CONFLICTED 😅

Great video, it really help me a lot just one question, it can fit on both differentials?

you should have just expanded the holes in your winch plate to match the bolt pattern with space for the winch mount bolts. would have saved you from having to grind your bumper, which makes it weaker. making the holes in the winch plate a little bigger wouldn't have hurt the winch plate in the slightest.

This job is silly time consuming.. lol.. I hated doing it.

Hi, Can you help me with governance? I would like to send you a video. Jeep Wrangler YJ Steering Tie Rod Moves Strangely. Is this normal or do I need to replace something? Governance works uncertainly.

Size are the front speakers? 4inch?

Go all the way, buy a CJ !

Another great video. Thank you. Just did this on my drivers door. Took a while, had a lot of broken clips in there. Your video is the most comprehensive for sure.

Dana 35?

Thanks for the video. I suggest Redline products for this application in the future. Great stuff.

Had Lube Locker gaskets on both my differentials for awhile now. Love 'em. Much easier when servicing the diffs.