![Londa Rohlfing](/img/default-banner.jpg)
- 177
- 2 836 866
Londa Rohlfing
United States
Registrace 30. 09. 2007
My sewing videos are made with my goal of getting what is in my head and hands after a lifetime of sewing out to the public, in the hopes that watching them will help you to love sewing just as much as I do, whether that be for a professional skill and business, or a wonderful hobby.
Thread Breaking? Check the Throat Plate or Needle Plate Condition on Your Sewing Machine
Londa explains why thread breaks constantly on your sewing machine - or at least a VERY likely reason: rough spots on the Needle Plate (also called Throat Plate)...where the needle goes down into the machine - and how to fix it.
zhlédnutí: 144
Video
How to Sew a Continuous Lap Placket
zhlédnutí 542Před 8 měsíci
Follow Londa's easy directions for how to sew a Continuous Lap Placket - without ANY hand stitching. This technique works at the bottom of sleeves for cuff opening, and also at the neckline
Features to look for in a Sewing Machine
zhlédnutí 324Před 9 měsíci
Features to look for in the gift that keeps on giving: a SEWING MACHINE for less than $300 - this one is a WORKHORSE! Needle threader, speed control, needle up & down plus MUCH MORE! Also watch: czcams.com/video/NU_5oCs_mlw/video.html shows even more features including needle position and feed dog dropping. Though it 'looks' different, this is the SAME machine features, whether 'maroon' or 'aqu...
All About Sewing Buttons On with a Sewing Machine
zhlédnutí 275Před 10 měsíci
Yes, your sewing machine CAN sew on buttons, but there are some 'tricks' to know. Londa will explain it all in this video.
How To Hem Jeans
zhlédnutí 347Před 10 měsíci
Londa shares her technique to 'Balance the Bulk' to make the stitching process of hemming jeans much easier. Special threads and stitch length are covered in this video. Jeans Stitch Thread: www.londas-sewing.com/product-page/yli-jeans-stitch Suggested Needle is a SHARP 'Jeans' Needle. For Jeans Stitch Thread, Size 100 was used. Find those needles at this link: Jeans Needles; www.londas-sewing....
How to Sew a Hair Scrunchy with Bunny Tail - Londa's Directions
zhlédnutí 252Před rokem
Londa shares her directions for 1st-time sewers (age 6 and up) to make a Hair Scrunchy. For more of a challenge, add a Bunny Tail! Helpful Notions: * Turn Tool www.londas-sewing.com/product-page/ez-threader * Loop Turner www.londas-sewing.com/product-page/loop-turner-dritz Teach the children in your life to sew! Read WHY at this link: www.londas-sewing.com/post/learning-to-sew-teaches-many-skills
Invisible Ziper Sewing Steps
zhlédnutí 492Před rokem
Londa shares how to 'think it through', press out the coil 'roll', match horizontal seams and more in this video that will make your invisible zippers a great success EVERY time.
Londa's Trick to Install a Centered Zipper So the Coil Does Not Show
zhlédnutí 580Před rokem
'Normal' directions will ALWAYS reveal the zipper teeth that you want to hide. With my (Londa) technique, that zipper coil will be hidden, there will be no curved stitching around the tab, and your stitching will be straight. Follow along step-by-step. If you learn best by reading, check my Zipper Manifesto at this link: www.londas-sewing.com/product-page/zipper-manifesto-how-to-sew-in-zippers-...
Lapped Zipper Application - Londa's Full and EZ How-to's for Sewing
zhlédnutí 719Před rokem
Lapped zippers are my go-to favorite zipper application: suitable on pants, skirts, and dresses. I show you how PLUS here's a link to well diagramed how-to's for the entire process AND the extra fine finish at upper edges with facings. Find those directions at this link: www.londas-sewing.com/lappedzips
Bury Your Threads to Secure When Sewing
zhlédnutí 918Před rokem
Londa explains the challenge and gives you her 'bury the threads' technique to secure loose ends of threads when stitching with a decorative thread on top for topstitching.
FrenchSeams
zhlédnutí 564Před rokem
Londa teaches what IS a French Seam - why use it and HOW to stitch them successfully.
Londa Teaches Heirloom Sewing
zhlédnutí 5KPřed rokem
Heirloom Sewing breathed new life into my sewing hobby years ago and jump-started my professional sewing career. I teach the basics in this video: lace identification, basic machine heirloom sewing skill how-to's, and give ideas for how to utilize these skills in a modern wardrobe for feminine detailing.
All About Buttonholes on your Sewing Machine
zhlédnutí 482Před rokem
Londa explains how the automatic buttonhole system works on the majority of the new-er sewing machines of all levels: inexpensive to super expensive models. How to size buttonholes, placement, tension, and even fine nuances such as decreasing length and other nuances of the system.
Why Stitch Length Matters When You Sew on a Sewing Machine
zhlédnutí 746Před rokem
Londa explains how to determine the best stitch length for different types of fabrics and different sewing tasks.
Learn All About Fabric GRAIN in Sewing
zhlédnutí 581Před rokem
How do you figure out which way is cross grain, which way is lengthwise grain, and what is BIAS, anyway? Londa will show you all you need to know in this video.
Solutions to Tension Headaches with a Sewing Machine - Part 3
zhlédnutí 325Před rokem
Solutions to Tension Headaches with a Sewing Machine - Part 3
Solutions to Tension Headaches with a Sewing Machine - Part 2
zhlédnutí 260Před rokem
Solutions to Tension Headaches with a Sewing Machine - Part 2
Solutions to Tension Headaches with a Sewing Machine - Part 1
zhlédnutí 464Před rokem
Solutions to Tension Headaches with a Sewing Machine - Part 1
How to Adjust the Blind Hem Foot for Strong, Invisible Hems on Your Sewing Machine
zhlédnutí 658Před rokem
How to Adjust the Blind Hem Foot for Strong, Invisible Hems on Your Sewing Machine
If Your Sewing Machine SCREAMS and Won't Work...You Missed the Take-Up Lever
zhlédnutí 464Před rokem
If Your Sewing Machine SCREAMS and Won't Work...You Missed the Take-Up Lever
Rhythm - Repetition of an Element in a Garment is SEW Important
zhlédnutí 1,1KPřed rokem
Rhythm - Repetition of an Element in a Garment is SEW Important
Ge to Know Londa - Professional Seamstress/Instructor Willing to SHARE her sewing knowledge.
zhlédnutí 547Před rokem
Ge to Know Londa - Professional Seamstress/Instructor Willing to SHARE her sewing knowledge.
Londa Interviews Hat-Maker Mike Moore - Buckaroo Hatters in Covington, TN
zhlédnutí 1,5KPřed 2 lety
Londa Interviews Hat-Maker Mike Moore - Buckaroo Hatters in Covington, TN
Vintage Sewing Pattern Sale - Vogue Designer, Stretch & Sew, Kwik Sew and other misc brands.
zhlédnutí 903Před 3 lety
Vintage Sewing Pattern Sale - Vogue Designer, Stretch & Sew, Kwik Sew and other misc brands.
How To Shorten a 3 Layer Gown with Serged 2 Thread Rolled Hem
zhlédnutí 2,9KPřed 3 lety
How To Shorten a 3 Layer Gown with Serged 2 Thread Rolled Hem
Sweater Jacket Up-Cycle Sewing with Londa
zhlédnutí 1,5KPřed 3 lety
Sweater Jacket Up-Cycle Sewing with Londa
Design & Stitch Up-Cycle Top from Fabric Scraps & Thrift Store Lace Dress - Final Video
zhlédnutí 1,1KPřed 3 lety
Design & Stitch Up-Cycle Top from Fabric Scraps & Thrift Store Lace Dress - Final Video
Up-Cycle Top from Thrift Store Lace Dress + Stash Fabrics
zhlédnutí 863Před 3 lety
Up-Cycle Top from Thrift Store Lace Dress Stash Fabrics
Final Result: Up-Cycle Man's T-Shirt to a Unique Ladies Top Sewing Project
zhlédnutí 1,1KPřed 3 lety
Final Result: Up-Cycle Man's T-Shirt to a Unique Ladies Top Sewing Project
Thank you for the tip to eliminate the Dunce Cap Pointed Ends on my pillow. It was my first 18"x18" pillow. I found that I like the Down Alternative Microfiber pillow inserts a little better than the Poly Filled inserts. Now that I see your solution it makes perfect sense. Thanks.
Super! I'm happy it has helped. you.
@@londasews I found some nice fabric and made pillow yesterday. I was so excited and then saw the Ugly corners. I was so disappointed.
@@superfly3990 Did you use my technique? It sure should have worked..... Are they adequately 'stuffed'? Depending on the fabric, and edge treatment, you may need to 'stuff out' the corners with additional stuffing.
@@londasews I will be giving your technique a try today. While I was studying my pillow with the Ugly Corners I was thinking about giving the middle sections "Love Handles." Sort of the opposite of your "Corner Tuck" technique. As soon as I saw your solution, and the other tips "Tight Sizing" I knew immediately that you had figured it out. Thank you so much ! I'll let you know how I did.
First, thank you so much for the depth of knowledge you share in your videos! You are the only person I’ve found who has a method (that they’ve shared, at least) for prewashing/shrinking interfacing, which is exactly the question I needed answered. Subscribed, and off to purchase your PDF! Thanks again!
Thank you so much for explaining the reason behind the clip or notch system on the garments.
At the bottom where you made the 4 stitches. Did you go 4 stitches on either side starting at the middle at the seam line? Total 8 stitches?
Yes Mam - I just double-checked, and that is what I did i the video - though the stitch length that you are using will determine that.
Thank you so much. It’s hard for me to see sometimes on the small screen. 😊
Thank you. My friend sent me your link and even though I’ve sewn for over 50 years I’ve already learned so much. On the buttonholes I always made mine manually because that’s how I learned and I never could get my attachment to work I thought. I didn’t realize it would stop on its own, so of course after the first buttonhole the rest were awful! Thank you for sharing your astounding knowledge. : )
Thank you so much , makes all the difference
Hi there, LOVE the video, setting sleeves are the bane of my sewing life….i am practising like mad! One question I have is why do you sew from one notch around to the second notch and then up to the dot? Why not sew notch to notch, or sew dot-notch-seam-notch-dot to start with? If I stick with your method, is there a better notch to start with? The rear notch of the sleeve or the front notch of the sleeve? Thanks for letting me know Londa. x
I believe I always start on the front single notch, then work my way around, past that starting point and then a bit towards the cut edge up to the back double notch so that the underarm area is stitched securely twice. I hope that answers your question.
Thank you ❤ ! I have also been disappointed with Pellon nonwoven fusible. Great tips!
Thanks for your video it's extremely helpful 😊
I'm happy it helped you! Thanks for your comment.
Can you please clarify which scissors you are using in this video. The link in the description says Kai 5135 but in the video you say they are Kai 5165. Great video, very helpful.
Kai 5135 is just a smaller scissors thatn Kai 5165. I have and use them both DAILY! Get both!
Entre = between. Deux= two. (Google translate should have a sound recording for you to learn the correct pronunciation of this much featured french word.)
Thanks - I just shared as I was taught by the experts in the field.
Hi Londa, Now that you've made me aware of them, I want to make every effort to avoid pointy pillow corners. That being said, can your corner tapering technique be used in combination with a zipper? If so, what advice do you have for obtaining a good result?
I would be SURE to not have the zipper come anywhere close to the corner, regardless. Instead, I add width to the back of a pillow in the center of the back (or close to an edge - up to you), then insert a zipper with a lapped application. I just looked at one of mine, and it has a 1" overlap over the zipper. Wish I could attach a picture, but don't see that is possible. Contact me through my website www.londas-sewing.com and I'll be happy to share it with your privately.
Thank you very much for explaining this. It makes sense! ❤
I"m 'sew' glad this helped you. I'm always open to suggestions for new videos - feel free to contact me with your ideas! www.londas-sewing.com
I use the seam ripper to poke out the corners with the ball point side.
If that works for you - fine. To me, that seems a bit dangerous. I always say - the way YOU"ve figured out is the best way for YOU.
Now…that was shirrly fascinating. It just ruffled my feathers! (I wanted to drop in via the email I received. Sometimes, we realize late what we will be missing. 🥹 You are a treasure of information. Every time I interface (woven of course), I’m reminded of your talent. 👏👏👏
Thank you. You, sire have a definite way with words - I hope you do some writing!
Your videos are so good! Thank you for posting them.
The Comment that came to me from you asked for a link to my DVD on sewing on knits - here it is, and it is not sold out - I was able to put it in my shopping cart without an issue.... www.londas-sewing.com/product-page/stretching-your-knit-sewing-know-how-with-londa
@@londasewsThank you so much for your prompt personal response! I found that if I signed up & signed in on the website that I was able to place the order. I'm looking forward to the DVDs
Sewing
Incredibly helpful, thank you!
Will this work in suit sleeves ? I'm following a Mccalls pattern and I just can't seem to get the gather stitch right , and is making my sleeve look like a woman's puff shirt.
YES!!! It WILL work. I promise. Take OUT those gathering stitches and make your FINGERS mush it in every single stitch. Cut some PRACTICE garments. What is the pattern number? Some patterns DO give just too much height to get in properly - and the fabric determines alot as well. I was making a suit when I was taught this - as I share in my video. Watch the video over and over... especixlly starting at 1:54 forward. Good luck!
@londasews it's mccalls m4745 a civil war jacket. I'm modifying it for a Red Dwarf Cosplay . The Character I'm doing is Rimmer his series X to XII is similar to a star wars imperial officer so this pattern seemed like a good start for modifying. This is only my second ever sewing project so it's fun learning. Thankyou for your advice , at present I can't seem to get it bunching but practice and all that.
You are very brave and I applaud you - GO FOR IT - just practice!
@londasews thank you my only problem now is I don't have a slow stitch on this brother LS14 , it very beginner.
Watch this video:as it shows off features that I think you'd find VERY helpful if you are really serious about this. The current model, while sporting all the SAME features is aqua and called the Charlotte. Video: czcams.com/video/NU_5oCs_mlw/video.html Machine at my website - and I'd do a zoom call with you to 'train' you on it as part of the purchase price. www.londas-sewing.com/product-page/charlotte-sewing-machine-from-eversewn
I have never thread a machine with the foot down and all of my Janome machines nest
That's sad! Do this and write me back at londasews@gmail.com: Thread with different colors in the needle and the bobbin, then observe which thread is nesting on the bottom!
I agree! I have been very happy with all my purchases from Marcie Tilton!
Im confused. Do i have to be a lady in order to follow these instructions?
of course not.
dog ears 😂, thank you for solution.
Thank you! Thank you! Thank you! Finally a video with clear concise instructions that benefit both the novice and professional. I’ve tried so many times before and my sport elastic always looked messy and amateurish, at best.you have a special gift when presenting an instructional video. I followed your technique and my lacrosse shorts looked professionally sewn when finished. I followed your technique and instantly became an instant follower of your channel. Thank you, Londa! You are incredible!
WEll - you made my day - week - month! Thank you for your kind words. PLEASE email me at londasews@gmail.com with any suggestions you might have for future videos. Turning 72 the end of this month, I'm likely closing down my 'business' of selling my books, DVDs, and notions and going only to commissioned upcycle pieces and teaching here in my home studio and via videos. For now - check out my website for a few more weeks at: www.londas-sewing.com SHOP at Close-outs! I bet you'd enjoy my DVDs
Yes, that absorbing pad it to help absorb perspiration, as you say to prevent staining at the surface.
Need close ups.
Love it
I have been doing this for decades, except I only trim 1/4". That information comes from an old Sunset pillow book. That book shows how to cut continuous binding as well. It is by far the best pillow book out there. I'm really glad you showed this tip. So many new sewers don't know this. I think the bigger the pillow the more you can trim. I'm using 16 x 24 pillow inserts and plan on tapering 1/4". But the next time I do an 18 x 18 or larger I will try the 1/2 " trim.
Thank you for taking time to share that you do the same - and the small differences.
So much information shared. Thank you!!
Beautiful work. It should stay with the family, honestly. It is art.
Ironing the pattern down helps A LOT too
Excellent video. I lost my mojo but I’m getting it back. Inspiring.
Great video- thanks 🥰
🤦.... THANK YOU SEW MUCH!!! I was so close to throwing my machine out. 😂🤣
Thanks for taking time to Comment - makes my DAY that you found me and it solved your problem.
TYSM for sharing this video with us. It is so informative about sewing an elastic band into fabrics. 😉
Awesome tip about sewing the corner of the opening. I had done square pillow patterns years ago for the non-dog ear corners but didn’t remember the measurement to do it on my current rectangular pillows. I assume your instructions will work for both shapes.
for sure - any corner in a puffed 'anything' that you want to look square and not pointed is my opinion. Thanks for writing.
Thank you for this video, I will now try your way and see if I can get it right next time 😂
Let me know if it works for you. Remember to steam at the end!
I'VE BEEN LOOKING FOR A SITE LIKE THIS FOR A LONG TIME. I'm an experienced sewist who wants to improve garment finishes, but nearly every youtube site is for beginners! This is just what I'm after.
Thanks! Honestly - I've put up about everything I can come up with - so I"m eager for your suggestions! Please contact me through my website: www.londas-sewing.com THANKS!
Yes, this is paydirt! I am so glad your youtube channel finally came up in my feed. I have been searching online for instructions to set in a sleeve as the professional/factory trained folks do for a long while now, but found nothing. Wonder why this is? Forever grateful and thankful!
I know exactly how you feel - I felt the same when shown by the lady I tribute in the video. NO MORE 'ease-stitching!' I'm glad you found me, and if you have any additional topics, skills for which you need a video, please contact me.
You're a gem Londa! I most certainly will contact you with any further skills/help with other sewing situations. Thank you kindly!
I love your videos! Thank you!
I've been doing this for a couple years...didn't know it was a thing! I still use a few more pins than you but thank you for the tutorial!
Thank you! This was EXTREMELY helpful for me!
thank you for teaching online, i have no where in my town to learn sewing and its been so helpful
Thank YOU for taking time to write. I do hope you explore ALL of my videos. If you need to learn something not included, just send me an email at: londasews@gmail.com with your suggestion.
thank you so much
Thank you for sharing. You made it easy
🎯. 5:15 Thank you Now I can make my stitches better - Corn starch, little larger thread. Stiff. And the needle ? Larger or Smaller, same ? I'd like to try the winged needle. It's very elegant Variegated color thread. 🤺💐
Needles are specific for the type of fabric or task you are doing. Look for my video on needle and thread selection.
@@londasews thank you 🤺💐
📌. 4:39 💥 Nice machine. Good price Metal Portable Auto features Drop in bobbin - a must. First thing I look for. The side bobbin 😵💫 🤺💐
Super useful
Do I need to sew a stop at the bottom of the zipper teeth? Also I have trouble positioning the zipper so that the needle is seeing at 5/8 seam allowance. The teeth don’t really stay rolled uniformly from top to bottom for me as they go through the presser foot channel-any tips?
No - you don't need to stitch a bottom stop. It is vitally important to press the roll of the invisible zipper OUT so that you can get close to the coil. Lay the zip right side down on the right side of the fabric right on the 5/8" line. You might find it hepful to baste the zip in place. Try those things...
Very good explanation, thank you! I’m a new sewist and I’m petite. Most pants are too long for me. Would I need to make length adjustments from hip to knee or from knee to ankle or split the difference between both?
It is always best to split the difference, altering at numerous places rather than all at one place. If there is shaping to the pant leg, you'll want to maintain that shape by shortening both above the knee and below the knee.
@@londasews thanks, that’s what I was thinking
genius to use contrasting colours of fabric. the illustration is more vivid. do you have any tips on how to finish the armhole in a french seam as in men's shirts?
Yes, setting in a sleeve with a French Seam IS actually is possible. Use this same technique, but WRONG sides together to start, and in a 3/8" seam, then trim close, press right sides together, and do it again. A man's shirt is inserted with a flat fell seam.