Video

Your brake lines must have air in them because I had no problem with crossbar other than the brake pedal hitting it coming back up

They were honestly some no name brand off Amazon that were chromed out with the blue filter so lights didn't glare

Progressive 9.5" I believe

Thanks man! I just bought a pair of shortys last night and will install them next Friday. Awesome sound and awesome video 👍🏽

My man! If you still own the bike or know about this... what are your fuel screw settings as far as turns. I cleaned my carbs and took the fuel screws out without knowing the setting and now my s50 idles like sh..😢 I'll pay you just for the info! My service manual just says "pre-set" but previous owner removed the brass caps to adjust for whatever reason. If you can please help 🙏🏼. Thanks!

It has been over a year since I started stunting

@@psychouki true but still pretty sick what kind of bike you riding in this?

2016 yamaha fz07

I believe I made a small bracket that allowed me to relocate the mount point to where the rear master bolts to the rearset

Idk which models finally went with EFI

brother, the radiator fan on my suzuki boulevard s50 doesn't work, what can I do?

You're a little late on the comment lol🤣

I have the blinkers mounted to a relocation bracket and they are tied in with the shocks mount location. Relocation brackets were like $5

If they wrecked the bike hard enough to snap that front stop on the fork then who knows what else could have happened. I'm in the business of staying alive on a motorcycle I know is 100% fine and this frame was not fine

Have a video i will upload. Alot of Mt content is on tiktok

I'd say anywhere from 35-40mpg and the tank is right around 3 gallons. So 100-120 miles a tank

I did but I do not own the boulevard anymore unfortunately

@@psychouki shoot yeah I think I remember a video of you saying you were selling it. do you happen to recall what you did to get rid of that squeal?

@@AwWwWwWwWyA took them back apart and regressed the pads and caliper plus use some alcohol on the rotors and soak the pads in alcohol and burn the top layer of the pads a little to get rid of any contamination

@@psychouki appreciate you dude thank you

I honestly never had to do anything to my carbs.

Dope! Thanks mane 🤘🏾

I never had to rejet. Just cleaned the carbs .

I got a heavy hand 😂

What do you mean??

Your killswitch will need to be hooked to your battery and then to the ignition that way your killswitch let's power go past it to the ignition

@@psychoukihey man im currently trying to install at the moment dm if you could help

One is underneath the seat and tank and the other one is under the tank but more toward the front of the bike. It will be a process taking them off and rebuilding them and getting them back on but you never know how to do things until you do them. Just make sure you remember or take videos or pictures of how stuff goes back together. I fortunately remember where stuff goes

@@psychouki thanks bro I'll look into it

@azzyoutdoors3296 I actually just got rid of my boulevard so as far as a reference I don't have one anymore but I csn try and help eith whatever your questions are

@@psychoukiwhat's it look like? Got a picture?

Grom SF fender any year from 2016-2021 I believe

What motor exactly??

@@psychouki its not exactly powerful but its double the standard 50cc lump

MK Stunts. I would get the flat style 12 bar. It's much more solid feeling compared to the round style 12bar

He is indeed. Much better now than when I meet him about 7 months ago

I like the seating angle on where it's sitting. I currently have not got the front bracket welded but it's attached to the seat. I just sit further back. It honestly needs support in the middle of the seat as well because of how long it is. The seat would want to bend in the middle. I wouldn't want to take a chance of breaking the 3 mounting points. Almost thought about bringing the lid back out and seeing about using the platform to help make a better seat mount but at the same level it's currently sitting

Sounds like either a vacuum leak or carbs need cleaning. Check your boots coming from your airbox to the carb first and make sure they aren't dry rotted and are seated properly. I never use my choke

@@psychouki now that the weather is starting to get above the 70s consistently I can use my choke less and less but wow your bike starts without choke as well? thanks for the tip def going to clean my carbs for sure

Oh yeah. I messed my foot up a little but just some bruising . It's been quite some time since this video and many more crashes🌿

@@psychouki *oh thank god your ok Brother these crashes can be more damaging then others*

805cc

Low on power? Can you go more into detail. You say it runs but can you ride it down the road??

You can use it

Do you got anything better to say or you gonna keep repeating yourself??😆🤣 also it's 8-9pm when we were out so for the 2nd or 3rd time. You sound dumb and unintelligent 🤣🤣

Sure

@@psychouki Thanks!

We actually haven't been out past 11pm so how about you stop running your moms internet bill up and stop watching my videos if you cant do anything but cringe at content Karen🤘

Sure do watch alot of my videos to complain so much🤣🤣

Bro it's 7 o'clock when I was riding and we were in a private parking lot in an industrial complex you jackass. Go complain to somebody else Karen!! Nobody cares about your opinion. You obviously like to complain about nothing since you don't even know wtf you're talking about🤣🤣

Sure

@@psychouki Thank you!

Rolling hills of Alabama

@@psychouki ok

@@brettatkinson7655 it's really kinda ghetto around here🤣

@@psychouki it’s like that everywhere.

@@brettatkinson7655 🤣

They are nice. I've actually got mines for sale. I don't ride it much anymore since I built it for my wife and she thinks it's too heavy for her

@@psychoukiill buy it to match my ls650

The Honda Bite plastics I bought from a friend and dealer over Facebook. His name is Edward Young. Parts are hard to come by

Am considering this option. Somebody has also done a gy6 swap as well

There's other videos for that dumbass. This is called a motovlog not a walk-around😆 God some people are dumb

​@@psychouki was about to say the same thing lol

@Nick B at least I don't feel like an asshole now🤣 I mean come on dude u wanna look at the bike I got 5 other videos for that

@@psychouki IKR stupid comment

Thanks buddy. Took a long time for me to search thru prismaticpowders.com to find what I wanted

I upload all the time lol. Slowing getting around to things. It takes time and money to keep the progress going🤘

Thanks💜🇺🇸 Alot of time and money.....and don't forget the frustration. Tons of that😂

Already got the seat frame in process of being made and welded. We will see my friend🇺🇸

Talking about the pinch bolts??

@@psychouki talking about those Allen bolts that came with it those 12mm would have been better

@@islandhomegrown778 thought they may have been too short as to why they would send the Allen head bolts. I like Allen heads myself better but maybe the material is inferior you mean??

@@psychouki no it’s just cause I hate Allan bolts lol my Honda dio moped 8,10,12,14mm bolts so I only have a special tool bag made for my bike on the go tool bag

@@islandhomegrown778 it's always good to have that tool bag just for your 2 wheels for sure. I've got my boulevard tool bag ready but haven't made one for the grom or Ruckus yet