- 17
- 417 423
AnalogMagik
Registrace 5. 11. 2017
AnalogMagik Version 2 Combined Azimuth LR & VTA Tool
AnalogMagik Version 2 is the world's first tool to allow users to adjust Azimuth using only 1 single test track, on the fly.
It allows you to see both L and R channel's Crosstalk together in real time. On top of that, the Vertican Tracking Function is also combined into 1 single track, which means you can perform 3 measurements at once, and on the fly.
It allows you to see both L and R channel's Crosstalk together in real time. On top of that, the Vertican Tracking Function is also combined into 1 single track, which means you can perform 3 measurements at once, and on the fly.
zhlédnutí: 1 670
Video
FR64s / FR66s Orignal bearing vs AnalogMagik ABEC9 Semi-Ceramic bearings
zhlédnutí 816Před 2 lety
Fidelity Research FR64s / FR66s Orignal bearing vs AnalogMagik ABEC9 Semi-Ceramic bearings www.analogmagik.com/bearingupgrade
AnalogMagik ABEC-9 Ball Bearing Upgrade for Fidelity Research FR64s / FR66s Tonearms
zhlédnutí 1,2KPřed 2 lety
This is a before and after video of the original FR Bearings vs the upgraded ABEC-9 Semi Ceramic Bearings by AnalogMagik. The ABEC-9 Bearings are of the highest quality available and they are significantly better quality than the original bearings. www.analogmagik.com/bearingupgrade
Original Fidelity Research FR64s/FR66s Bearings wobbly
zhlédnutí 924Před 2 lety
Due to technological limitations of the bearings manufactured in the 70s, tolerance are not tight. The balls are not all in contact with the bearing walls. They can be upgraded to AnalogMagik ABEC-9 Ceramic Ball Bearings, this highest quality bearings available.
AnalogMagik bearing upgrade for FR64S / FR66S tonearm, with ABEC9 Semi Ceramic Bearings
zhlédnutí 356Před 2 lety
Created by InShot:inshotapp.page.link/YTShare
AnalogMagik Headquarters 2018 Youtube
zhlédnutí 4,3KPřed 6 lety
Richard H Mak presents, a review of the Supreme Analog Tangenta tonearm.
Tonearm Anti-Skating: How to set tonearm antiskating (AnalogMagik Tutorial 5)
zhlédnutí 36KPřed 6 lety
Visit www.AnalogMagik.com to find out more information. As the turntable spins, the stylus of cartridges mounted on pivoted tonearms may exert uneven pressures on the Left vs the Right grooves walls. Microscopically, this imbalance may result in higher distortion levels on one side of the groove walls vs the other. To counteract this force, most tonearms will have an anti-skating dial which wil...
Turntable Setup and Basic Cartridge Alignment (AnalgoMagik Tutorial 1)
zhlédnutí 196KPřed 6 lety
Visit www.AnalogMagik.com to find out more information. This video contains tools made by Acoustical Systems, and it is not party of the AnalogMagik Calibration Software & Test LP Package. Cartridge alignment involves fine tuning multiple setup parameters which are all interdependent on each other. Every step we take has single goal in mind, and that is to retrieve what was recorded on the groo...
Vertical Tracking Force (VTF) (AnalogMagik Tutorial 8)
zhlédnutí 9KPřed 6 lety
Visit www.AnalogMagik.com to find out more information. Most cartridge manufacturer will specify a number which the Tracking Force should be set at. More often than not, this number is a range instead of a fixed number (eg. 1.8g to 2.2g on most cartridges). We have spoken with a number of cartridge manufacturers, and none was able to provide us with a firm answer on how to how to determine an e...
MC Cartridge Loading and Gain level (AnalogMagik Tutorial 6)
zhlédnutí 25KPřed 6 lety
Visit www.AnalogMagik.com to find out more information. Most Phono preamps for MC cartridges or Step-up Transformers will allow users to choose different loading choices to match with their cartridges. Cartridges manufacturers will also provide a suggested loading range. However, the actual loading requirements for each cartridge is affected by a number of different factors such as different to...
Azimuth: How to setup Cartridge horizontal balance (AnalogMagik Tutorial 3)
zhlédnutí 32KPřed 6 lety
Visit www.AnalogMagik.com to find out more information. Azimuth refers to the horizontal balance of the cartridge when viewed from the front. This in turn determines at which angle the stylus sits on the record groove. The theoretical assumption is that when the Cartridge is perfectly perpendicular to the record groove, the stylus will sit perfectly in the record grooves. Visual methods using...
AnalogMagik Cartridge Calibration Software Teaser Video
zhlédnutí 12KPřed 6 lety
This is a teaser video on AnalogMagik: All In One Cartridge setup Software and Test LPs. A scientific and repeatable way to calibrate: 1) Turntable Speed 2) Wow & Flutter 3) Azimuth 4) Vertical Tracking Angle (VTA) / Stylus Raking Angle (SRA) 5) Vertical Tracking Force (VTF) 6) Anti-Skating 7) Phono Stage Loading 8) Phono Stage Gain 9) Resonances 10) Vibrations Please visit www.analogmagik.com ...
Vertical Tracking Angle: How to setup VTA / SRA (AnalogMagik Tutorial 4)
zhlédnutí 53KPřed 6 lety
Visit www.AnalogMagik.com to find out more information. Vertical Tracking Angle refers to the angle of the tonearm (specifically, the angle of the cantilever vs the LP) when viewed from the side. This in turn determines the Stylus Raking Angle (SRA), it is the angle in which the stylus is raking the record grooves at. An excellent place to start the VTA Angle, is to visually observe the stylus ...
Cartridge compliance and Resonant Frequencies, vibrations (AnalogMagik Tutorial 7)
zhlédnutí 12KPřed 6 lety
Cartridge compliance and Resonant Frequencies, vibrations (AnalogMagik Tutorial 7)
How to set Turntable Speed, and WOW & FLUTTER (AnalogMagik Tutorial 2)
zhlédnutí 28KPřed 6 lety
How to set Turntable Speed, and WOW & FLUTTER (AnalogMagik Tutorial 2)
Not an easy thing to use. You need a crazy sharp microscope not to mention great vision power to spot the tiny stylus and it's vertical alignment
No, AnalogMagik does not relie on visual methods. It is based on measurements while the stylus is playing on the grooves. Visual methods are unreliable because whatever is eyeballed visually will change when the vinyl spins.
Missed opportunity. Should have made it Pi kilohertz 1:59
Honestly, this was one of the simplest and most informative explanations, especially for a novice like me. Thank you!
My table is a Thoren TD-160 totally modified with a Jelco TS-550S tonearm , Hana ML York phono Stage An Audio Sandbox on 1/2 Squash balls
There is really more to LP setup than just screwing in the headshell on the tonearm. I'm ready to get into this hobby again this time right!
Thank you, the most concise and accurate explanation of VTA available. A God Send......................Hurahh for your expertise
Maravilloso sonido
I just took a big shit!!
very sweet voice lady
What an utterly beautiful girl 😍
Informative video, and she explained everything very well.
THE GAL IS HOOOOT !
👍👍👍
You didn’t tell or show us how to set the VTA, you gave us a commercial to sell us your product!
Sure she did. You raise or lower your tonearm and using their software you want the lowest intermodulation distortion. Or you can do it by ear which is much less accurate as most ears are messed up from too many Black Sabbath & Ted Nugent concerts in the 70's.
@@jgfergus Uhhhhhhh..... I resemble that remark.
Makes a massive difference, once you heard the difference you will be taken to a new musical dimension, be it old 45's of new & used 33.3 Disks
Very good realy 👍♥️🌺
Enjoying these tutorials, and some great information presented. Wish I had some of the gear/tools used, and can only hope I got things setup right when Installed my Ortofon Red on my Pioneer PL-510. ps Template is pronounced tem-pluht , not tem-playt - drove me nuts and stopped watching...
Hi Lauren sorry Iam 3 years late but Iam here now 😊
I think you sure know so much, but this old person loves his Dual 1229 vintage restored Turntable and my Shure 15 iiii Cartridge . So easy to set up
Nice out of this world system 😮🤭
If only I found these tutorials in the first place I could have saved me hundred of hours watching bull s... Thanks
🤗
Awesome and Beautiful 👍👍👍👍
Alltough my turntable is perfectly set I liked to watch this video ☺☺ It seems I do live in thewrong country
Very clear and insightful tutorial. One thing I wonder about is how to fix improper landing behavior. Could this cause imbalance between left and right on stereo cuttings? How is the adjustment done? Is that done by azimuth adjustment? Thanks for your reply!
Avalon and Jadis, what dreams are made of.
How much and where can I purchase the test record and software? Are there any additional recommended test equipment needed, ie. Oscilloscope, wow/flutter-speed, multimeter etc?
All questions can be answered, but visiting the FAQ Section of our website, www.analogmagik.com
Excellent video! This tutorial, and procedural method is the best one I've watched on CZcams! Thank you for all these clear, detailed descriptions, and procedures. I am detailed for the most part, and try to be exact; I've upgraded, and repaired my desktop computer, and upgraded my laptop computer. However, I honestly don't know, have the skill, and experience to get these things correct, yet. Very good video! Thank you very much for your wise advice, detailed instructions, close up views, and helpful tips on the adjusting of phono cartridge, and tonearm. The tonearm is not something I knew had to be accurately aligned as well. Again, thanks, AnalogMagik lady. Also, there is a saying from Mr. Vinyl TV; and it is Vinyl is final.
nice explaining! good job!
A excellent series of turntable setup calibration videos.
Thanks for a superb video. I wish you could help me with my set-up.
Smitten. Damnit.
Sending you good vibes 🙏🤗
I really like your channel. Best videos out there for setting up your tables. I just subscribed and look forward to more videos.
UGH WHY did i watch this. This makes me want to buy all those tools and re-align my shit.
oh boy, analog kid learning so much, thanks
You guys should put some "cards" with link for other videos... like you mentioned the Azimuth video. Great video though. Cheers!
very good video, salutes magik girl
Actually that was pretty good
So adorable.
this is amazing, thanks!
How can I get this for my home TT set up correctly?
You can purchase the software from our dealers, or if there are not dealers, from us directly on Analogmagik.com.
@DeMarcus Strange Buy a PC and stop whining.
I'd have to hire someone to get mine correctly! I don't have any patience! These comments! Wow! Now I see what women have to deal with!
shes soo pleasant thanks looks expensive to get those tools tho
What if you don't have a speed control with your turntable? How do you then adjust the speed?
You don't. You dump it to a garbage bin and buy a proper tt.
If possible adjust belt tension if you have a separate motor or try a slightly larger or slightly smaller belt. Depending on your TT brand there may be aftermarket aids like precision sub platters that help tighten up speed inconsistencies. Don’t throw your TT in the garbage.
I have a 1920s victrola credenza
almost every turntable has speed control. even the cheap ones, usually have a small potentiometer directly in the motor case which you can turn with a screwdriver.
Usaullnyou have 2 screws when you remove the platter with arrows showing you which way to turn the screw usually clockwise to increase and anti clockwise to decrease speed
I don't say this often and no, I don't own the product, but this company has really thought this product out from the protractor and azimuth alignment gauge to the software. It's not cheap, but considering all that you can do with all three products, I have to admit it's actually worth it if you have an expensive analog set up that you want to ring every last drop of performance out of your set up. I own both the Dr. Feickert protractor and the Mint LP and the product is based off of the Mint LP principals, but they went past even what the Mint LP does and the Dr. Feickert combined and then some. This company left nothing to chance and I watched all 8 videos before making this statement.