Video

Thanks a lot. Very helpful

So good to finally get rid of that shiny “piano finish”.😊 I had no problem following your video instructions and I used a black matte carbon wrap with “linen” surface. …now it’s only the shiny details on the steering wheel that still bothering me… The centre screen got a nice “matte” cover only days after I picked up the car.

Did this job today, with your video as a guide. Thanks alot. Used an hour or so on the job, but did not remove the wheel and liner. Just squizeed my fingers in, to plug the connectors back in. Also iused a lot of time to open the 5 point torx, what a stupid idea to use 5 point safety torx. Now its time for a beer. 🎉

Sorry but it looks horrible...

Where did you get the extra cup holder

Hur mycket procent förlorar du i kölden? Jag kommer nog köpa en polestar men har panik över att bli strandad pga bilens uppvärmning av batteriet i kalla temperaturer. Hur mycket procent förlorar du i kölden?

For a product that's supposed to fit the Polestar 2 specifically it's weird that the plastic keyed covers don't fit more flush to the car. The clamps shouldn't be visible with a big gap between the car and the covers. Bummer.

Svært god forklaring på hvordan du demonterer og monterer. Tusen takk for lærerik video👍

Silly

Do any of your MagSafe bracket designs support holding the iPhone in horizontal position?

Hello , I would like to buy v.3. How we can buy it. From Romania.

If you're safely able to reuse Nissan/NEC batteries, they must have done something right with their design and production.

is this updated up to now? thinking of doing the same.

Bettery price and charger price....

Can I just upgrade battery

Got three Nissan 24kWh packs, bought the individual modules from a company that resells EV batteries. Put them in 14S and use a Batrium WM5 Bms, its now running for nearly 3 years. Next project is a HV EV battery which does not need to be disassembled

as you have fitted lower springs do you need to modify the bump stops?

Спасибо за видео! Только я буду этот моторчик разбирать

Get rid of the music! It interferes with what you are saying.

Nice video. What do you suggest for audio settings as a starting point?

nice

For what its worth, thats not a repair, they come from the factory like that :)

Yo any updates for people asking for more info?

hey! i got my hands on 2 modules, and i am going to make a 72V for an Ebike build. havent started anything yet, so im just looking for some info on the modules. did u dissect them and make another voltage and use for them? if so, u have any experience to share? :)

Thanks so much for this perfect guide

What is the total weight? I’m looking for or to build a narrow teardrop with kitchen and cartrige toilet , (for the wife) to pull behind my HD trike.

What this fool talking about

Hi I have a question and hope you see this soon. I have to do this seemingly relatively simple repair. But for my i3 I have to change the door release mechanism, not the charge socket lock. My question is about safety. Of course I’d disconnect the emergency shut off under the front trunk but is that enough? As I understand it the door release mechanism is not part of the high voltage system so just disconnecting the front truck emergency shut off should be safe enough. Is this correct?

Firstly, thanks for your awesome content! How has the RTT affected your range on P2? Do you remember average consumption by any change? How does it compare to the camper you built? Is there some reason you went with RTT instead of the camper? I am planning to go on a road trip with my P2, and I am still wondering if the RTT is a solution or if I should just sleep in the car. Additionally, I have been thinking about something like a teardrop camper, but due to the route, there might be 100-150km distances without a charger, and I don't know if the 2021 P2 can handle it. And about the RTT, are you using the factory roof rack or something else? I saw a Reddit post by RaphaTlr, which was a bit worried about the RTT damaging the car because the clamp style isn't "secure." Do you have any opinion about this?

Just tried this for our brake pad warning light, pads have been changed but no luck resetting this light 😞

Thanks

Danke für das Video. Was für ein Mist, gut zu wissen!

This process worked for me, however I recommend jacking both sides of the front of the car up to remove upward tension from the anti-roll bar. If you dont do this it will be difficult to disconnect the anti-roll bar connecting rod and you won't be able to pull the spring and shock assembly out of the wheel arch. Other than that the process works well.

Not too bash but i think it looks cheap. Maybe it would look better with other/better quality wrap and installed by professional

Realy nice, great inspiration

What rooftop tent are you using?

Tjena Björn! Finns det möjlighet att få köpa färdigprintat av dig och då den senaste versionen av magsafehållaren (vänster) + 2st svarta muggållare med tillhörande ”fjädrande plastring” i samma färg, vad skulle det kosta i så fall? Har nyss köpt en svart begagnad p2 med awd 2021 och tänkte piffa upp den med några smarta tillbehör, din magsafehållaren verkar ju toppen, bra ingeniörat där👍🏻 Med vänlig hälsning, Micke i Norrköping

Bra video, men synd att du inte prata svenska!!

Thank you from the UK !! Mine need doing and this video will help when I get around to doing it :)

Weedio

The unknown central module is the Battery Heater Control. See: 1:13:45 The website below also gives a thorough explanation of the Nissan Leaf battery pack. It is offered by an instructor at Weber State University. The total length of the video is slightly under 2 hours. czcams.com/video/vYQJatWpBXY/video.html

How can i bying this batrry any one help me please

the engine has very bad engine mounts :-( Very bad... it will all fall apart.. This video should be documented by BMW "engineers" LOL

Any updates? Price etc..

Hi, I noticed your Polestar 2 does not have the passenger dashboard lighting? I just purchased a Polestar 2 and found out that the high illumination is part of the Plus package, which I didn't realise at the time of purchase. Are you able to do an instruction video on how to install the missing lighting (passenger dash, center console, door welcome light and boot lighting) that would be available with the Plus package? Thanks heaps

were you removing busbars with module jumpers still attached? or those silver plates just securing modules to each other?

Worked for me, great video.

You left the BMW badge in the middle. It is stuck on with double sided mounting tape, like the others, and you can use dental floss to remove it, like the others. However, the inner surface of the glass on the tailgate has an opaque black coating. This coating has been omitted in the areas of the taillights, of course. Also, there is a 3cm diameter window in the coating under the BMW logo, so if you remove the logo, then this round "hole" will become visible. My car had a rectangular white sticker stuck on the inside, over this round gap. The sticker was very difficult to remove, as it had to be accessed from inside.

Am i right to assume since each module is 2s2p what the middle contact of each module is for balancing? If you measure the volage across the middle contact is it half of the modules voltage?

very good work =)