- 151
- 538 650
boost4fun
Registrace 16. 11. 2006
Video
Fenimore
zhlédnutí 147Před 5 měsíci
The "dump" that they didn't say was a dump. The former Fenimore landfill site was dormant for decades. It had become an open field of mature trees and brush. NJ DEP allowed a convicted felon to buy the property to "properly close" it and build a fantastical solar farm. We all knew it was a scam. Residents fought it, but as they say "you can't fight city all" (because they were in on the plan). ...
BD Diesel Fixed
zhlédnutí 214Před 6 měsíci
BD Diesel came through and fixed the issue with their 4LO kit on my RAM. I don't know the details around the fix, but they did say mine was "defective". The fix prevents the "Service 4WD" message from appearing when you activate this kit. As I say in the video, I really love the kit for backing my trailer up my steep driveway. You get the torque multiplication of 4WD LO while backing, and can m...
Obstacle Avoidance?
zhlédnutí 32Před 9 měsíci
Testing obstacle avoidance on the DJI Mini 4 Pro while auto-tracking. Didn't work too well, but no damage to the drone, or even the props.
DJI Mini 4 Pro First Flight
zhlédnutí 30Před 9 měsíci
First trip around the hood with the DJI Mini Pro 4. A little disappointed with the low-light camera quality (where this drone is supposed to shine) vs. my Phantom 3 SE, but will goof around with the settings.
bd diesel dispute
zhlédnutí 268Před 9 měsíci
I bought #bddieselperformance's 4WD LO kit for my 2022 Ram. I had previously installed another kit on my GMC and it worked great. This one, however, does not. The truck will not shift into 4LO, instead it throws up an error message on the screen. BD Diesel won't take it back, citing their "warranty exchange" policy where I have to send it back and pay a diagnostic fee. If it's bad, I get anothe...
Insta360 in the Vette
zhlédnutí 66Před rokem
Another vid goofing around with the Insta360 X3 and the Gecko mount.
Insta360 Charger Daytona 392 Cruising
zhlédnutí 53Před rokem
Testing my Insta360 with a new SD card. Turns out the old one was too slow. Gecko mount. May have attracted some company, but they went after someone doing something stupid.
$5k John Deere Mower with Sloppy Steering
zhlédnutí 58Před rokem
JD dealer says it’s “in spec”. Wanders all over the place and rattles like a box of rocks at idle.
Insta360 X3 Reframing Exercise - Yamaha Big Bear 350
zhlédnutí 52Před rokem
Insta360 X3 Reframing Exercise - Yamaha Big Bear 350
Checking out an abandoned cement factory in town
zhlédnutí 23Před 5 lety
Checking out an abandoned cement factory in town
I hate it when it first came out I beat a xr75 and YZ80
'Promosm'
I don't believe that Suzuki is a 77 it's a 76 the 77 had the lead in Forks what's 76 did not
was no '76
Hate when the tree goblins snatch my drone.
Within an hour of me alerting BD Diesel to this video, they issued a full refund and an apology. I wish it hadn't come to this public shaming, but I just could not get past their customer care people who insisted I could not return the item. And the PayPal "buyer protection" was a complete waste of time, adding to my frustration. BD Diesel said this will be used as a training opportunity. So if you find yourself in this situation, maybe try a little harder than I did to find someone there that can help. I would still recommend any of BD Diesel's prodcuts to anyone.
I’m not sure that I would want to buy anything from them after watching this video .
I got this bike on Christmas day in 1979 I was so happy brings back memories
Promo*SM
My 6.5 NH was doing the same thing, - points and condenser. Found your RV post too:-) Both helped confirm my issue. Thanks - this video keeps on giving.
so been 6 years.....what was the issue
Points and condenser
@@boost4fun points? what year is that?
@@miketlane 1984
@@boost4fun wow, mine is a 1999. im thinking a bad plug is my issue/ runs fine just rough
@@miketlane yeah you'd have an electronic ignition. If you haven't done plugs in a while that's a good bet. Fuel filter and maybe clean the carb if it's been sitting for a while.
I stared at pictures of this bike in motorcycle magazines almost every day, dreaming I’d have the chance to own one.
I remember them days I used to have pictures of CRFS all over my bedroom wall as a teenager, finally got a 250f it blew my mind had a few then a few 450’s , even better!
If you ever consider selling this, please give me a call. Please. I'm not a rich person, by any stretch of the imagination, but I've got enough saved up to buy one. I'm a Builder/Remodeler by trade. And I'm really looking to replace the RM80 my Dad bought me & the memories my father created for he & I when he bought me my 1978 RM-80 just before he was killed in a car accident. I was 13 yrs old. And I was keeping up w/older buddies from my neighbiorhood on their CR-250's & YZ-125's. Id have a SCOTT face-shield full of dirt, but Id be right behind 'em roosterin' & trufin' !!! To this day I don't even remember who my Mom sold it to, (Which I feel guilty about) because after we were forced to move from my childhood neighborhood in South-Burlington Vermont, at the tender of age of 13, where riding dirt-bikes down the side of the road to get to the trails was perfectly OK< as long as we rode side-saddle when the local cops would roll on by....... to moving down to Old-Saybrook, Connecticut where all the rIch, snot-nosed Ocean living people lived & called the Cops the second they heard that 2-stroke screamin' down their roads ! I got in MORE trouble on that sweet little ballsy scooter than I ever did back home in Vermont. I too had mine jetted, and it use to wheelie 1st, 2nd, 3rd, by just rollin' on the throttle ! I use to out run cops at least once a week. and, they'd be at my house & at my High-school every week looking for me too ! Ha ! Ha ! Finding an RM-80 to buy & re-live some extremely important memories by just tinkerin' w/it & just owning it would mean the world to me, considering I'm 58 yrs old now. So, anyone who might have one, preferably a 1978, PLEASE REACH OUT TO ME ASAP ! 1-802-324-0707. My name is Richard. Thank you !
Best sounding exhaust ever!
Going on 40 years old and still kicking butt!
Grand national stock ran in the high 15's no telling how much money he spent to get it ti run 11's.
Ha ha ha! Ha! Ha. It ran high 13s bone stock. Pretty typical - the magazine testers were getting 4.9 0-60 and 13.9 with factory-delivered cars. How much did it cost to get into the 11s? More than a modern car does but I still had fun doing it.
I just recently bought one of these limos, and my second seat seems like it's stuck. Where is the latches to flip it? I found the one under drivers side....
LOOKING GOOD!!!!!!
It was the front prop shaft
Ever figure out what this was? I'm having a similar issue.
Were you able to fix it? or did you have to buy a new sway bar?
Thank you so much for your positive feedback, which provides us with more motivations to keep improving! Wish you have a great time on flying, should you have any further questions, please feel free to contact us at any time, we're glad to help.
yes ...looks pretty good now
My first motorANYTHING!
All I heard was wind and rattling :(
Would you consider selling the bike?
I had one of these, what a bike for the time, piped & ported mine with some jetting, smoked pretty much all of em, what a great year, 2nd overall in minis !
just pin it
wuss
What did you do for fix it?
Nothing yet. I'm in the middle of replacing the engine. I will need to deal with that stabilizer bar before I put it all back together though.
Great job!
Let’s support each other for now on
Bitchin!
nice video! keep it up! first likes!
Just got 1, nervous to fly 1st time.....Good landing!!
My videos are embarrassingly boring compared to most, but I'm learning. I used the RTH function on that flight. When you see it spinning around I had lost track of it. I got a message that the controller signal was low, but it was only a few hundred feet from me. RTH brought it back quickly and accurately. Once I could see it again I took control. It's really hard to crash them unless you hit something. Good luck and have fun!
Where did you get the lights installed on your Limo?
I installed them myself.
what was it? did you figure it out?
Yes the regulator was bad
What Engine Swaps Can You DO for more Horsepower. and can I put an XLR v engine in my base model?
The fridge was in the middle on the right side as you're facing the front of the trailer (opposite side from the camera view). The fire definitely started in the fridge compartment. Not sure why the front went up before the back but it ultimately burned down to the frame.
Where was the Fridge located - looks more intense toward the front of the trailer. I installed an www.arprv.com to help avoid this problem.
ahh you got to love vg30
Own both an M3 and a GN!! Both expensive to own but if you can turn a wrench it does miracles for the wallet!!
we made a video of my compressor surge fix. Budgetboosting, 84-87 Turbo buick surge fix
what did you do to finally fix problem?
I had a similar problem with my 87 Buick GN, wide open throttle no problem but low to mid throttle I had boost surging where my boost was going up and down bouncing from 14 to 20 pounds up and down which I solved by installing a small intake air expansion box between the compressor intake and the MAF sensor which prevented the inlet air from bouncing back and forth. The box is like a resonator with quarter size holes in it to catch the bouncing air so it does not reach the MAF sensor giving surging fuel inputs. I found this air box from a 1984-87 Nissan 300zx turbo and it fixed the problem. You could make one as well. I could make a budget boosting video about it to explain it in more detail this week if I have enough requests and comments about it on our you tube video page. Knowledge is power, its horsepower.
Id like to see a video on it, Thanks
gbgn1 we made a video at www.budgetboosting.com its in our budgetboosting you tube page titled 84-87 Turbo buick surge fix. Using an intake box with holes inside of it from a 1984 through 1987 Nissan 300zx turbo cars. Can be found at various wrecking yards. The video will show the box in detail. Once the box is installed between turbo intake and MAF sensor, any low, mid throttle acceleration turbo surges due to free flow will be cancelled in the box. The box will stop the surging air from reaching the MAF sensor stopping variable fuel flow which causes those power surges. Let me know how this helps. Most turbo buick guys install the aftermarket computers like the FAST but this fix works so you don't have to spend all that money and use the great custom chips that Turbo tweak makes.
uhh yea no kidding. in one word,,,,STUPID!!!!!
ok, now you see what Ive had to deal with, I have the dynojet box with the old part's in the plastic box. BUTTTT, why would he do the jet's and not see that it was running ragged? I think this guy was just a general change parts guy and not a REAL MECHANIC and then takes me for about 256 ,00 now im reallly weary as to who messs;s with it that thier not a nerd that dont know aything.. like I was saying before i found a guy that's MMI certified on harleys kawasaki honda suzuki. get things right
I got a jet kit put in month's ago. but the guy didnt clean the carbs and charged me 245,00 I got it home and it ran the same as before. the bike was running a while back and the baffle insert flew out, so thats why i was gonna get a new one from Dennis Kirk. so thats where it is right now.
yea, see that's what i was thinking too. a bike sitting for a year or more is not good. I found a guy a few miles from me that's an MMI certified mechanic. im taking it to him let him service it then It'll be right. im pitting OEM dunlop's on both end's then ill get an insert from dennis Kirk for the V&H pipes and put it in and then it wont be so loud.
I as wondering if it would do anything if i put some sea foam in there with a full tank. and then drive it 75 miles to see if it would clear the idle jet's out and then run decent.? It might ned a whole car of sea foam to do it. but If it need's the carbs done? that that's the best way.
thats what im doing too, I think mine are hard from age. whatever is a good overall tire like dunlop, or meztler, or even bridgestone.
I get on this nighthawk, and its a little tall in the saddle, was thinking about a corbin gunfighter so i set lower and not slide so much. this thing will still get up and go though, even sputtering in the lower rev's,