Video

Good I was recommended by someone to you guys saying that you sell great machines pressure washers I wanted to enquire if you ship to Africa the machines you sell thank you so much in advance for your response

My Karcher/Tecumseh pressure washer started after six monts storage on the first pull. New spark plug, fuel and three pushes on the primer bulb. Then I stopped the machine after ten minutes of use but it would not start after ten minutes. Could this be due to the ignition coil heating up? Will try tomorrow morning on cold engine. Thanks

Bought a brand new one thru Costco - doing everything as per multiple CZcams videos including this one - still won’t start - not sure what to do atm

LIFESAVER!

I just got one of these pressure washers, 4 gpm with a Honda GX390 engine. What a piece of crap! It was very difficult to start at first. Finally got it started and took it to a job. Started right up but the engine had no power. Lots of white smoke and it died after a minute of running. I’ve done everything that pressurewashersdirect has told me to do and it won’t start. Hopefully they will send a replacement or refund my money.

Man don't ever put your finger over the business end of a pressure washer running or not that's bad very very bad

Good video. Helped me a lot

UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust czcams.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.

Exactly what happened to my new pressure washer during transport to me. Still won’t start

I’ve been troubleshooting and trying to get mine started for 3 days. It’s brand new out of the box. This thing won’t start, it’s a nightmare. I reached out to their online help line and all you get is a thank you. No help, nothing. Just thank you. I’m returning my BE Pressure washer to the store immediately. Now way should it take over 3 days to get running, utter crap product and customer help. I bought this because I like buying Canadian, I feel I’d have more luck if I had bought a Honda or husqavarna pressure washer. Not worth the headache!! AVOID AVID AVOID!!

Thank you ❤ so much for your help, my washer is now working again❤️We appreciate your help❤️

I followed the steps and the cord still is stuck. What do I do?

It's usually not that easy on the gx390. What happens is the oil acts as a sealant on the valves, and the decompression valve doesn't work as it should. When you try and start the engine the compression rips the pull start out of your hand. To clean the valve seats, pull the spark plug, and spray carb cleaner into the hole (4-5 seconds) then pull the cord 10 times or so to blow all the cleaner and oil residue out of cylinder. Do this after you have already blown the oil out. Your decompression should feel better now. A little start fluid and a series if pulls should fire off.

The tip over is literally what happened to me, and I followed this video to the letter and voila, started right up. Thank you so much!

Mine doesn’t wanna start and I buy it yesterday

You my dude deserve an Emmy

Worked like a charm. TIpped over in the car and string locked up tight. Followed your video and was good to go in about 30 minutes. Shocked at how much oil came out after oulling plug but explains why it wouldn't turn. Thanks for the video.

great job . Thanks for the help.

where can you buy the new air filter and how much do they cost?

What a simple and straightforward video. Kudos

I just spent 500.00 on a BE pressure washer. You’d think YOUR video would be more detailed on how to start it. Close up of the throttle position etc…..

Just happened to me... how much would it cost for someone to fix it?

After the unit is started, can it be left running while not keep pulling the trigger? How to properly stop the unit?

I have a 1650 psi item 69488

Can you start a smaller pressure washer, pacifichydrostar? Please Thank you

I have the 4200 PSI version, and I find it helps immensely when starting to remove the tip from the wand and pull the trigger while starting, releases some of the pressure and makes it easier to start. Also getting a silver or black sharpie and marking the gas on position, choke on position. Engine oil drain plug size and pump oil drain plug size on the machine. This really helps speed things up when doing maintenance.

My model does not have fuel drain plug. 2700 psi, GC 160 model

Thanks a lot buddy👍

I watched hours of junk to find this simple straightforward easy to understand video. You killed it.

Didn’t even start it

Instead of draining the fuel cant you add fuel stabilizer to the tank, run your pw and shut the fuel lever off and let it stall on its own? That way you don’t have to drain the fuel.

This video totally saved our butt today. Thank you so much for this!

very nice delivery and substance, thanks

Thank you. Your very first suggestion worked great.

Thanks Chris! Awesome video!

Awesome video. Exactly what happened to my power washer and I could not get it started. Followed your steps and it works perfectly. Thank you!

My troy bolt 208 cc tiller engine is not turning if the spark plug is on can you help

Awesome video. I had tipped over my washer and oil got in all the places it shouldn't, followed all the steps in the video through the last one and it worked perfectly including white smoke at the end for 5 minutes. Very helpful. Thank you

Thx 👍🏽

Thank you so much you just fixed my problem you’re awesome

Went to a repair shop was told I immediately need a new engine that engine is seized up, did my own research found this video and now works perfect, I can only imagine gullible people would give in and pay for new engine

Ok, switch that bike to a Harley

Canadian? I heard the “what are you talking ah-boat?” accent lol

Thank you it worked for me. Little thing I would add while doing this to save you a headache. Do it on top of or somewhere you don’t mind oil getting. Also a wash towel is more sufficient because mine burped out so hard it shot oil across my garage with that that little paper towel along with it rofl. So be prepared guys! Mine shot out like projectile vomit first little pull.

Nice coat

I've never had a problem with a Honda motor, leaving fuel in it all winter, then again I tend to leave it in a place in a garage where you don't have to winterize it.

Runs quietly :p

Hi! I have a new pressure washer. I have not used it yet and want to put in the shed for winter. Do I need to winterize since outside of the box?

i have a 210cc BE Pressure Washer 3000 PSI - its a GOOD Pressure Washer - BUT the RED CART is RETARDED !!!!!!!!!! VERY HARD to MOVE i see you have updated the CART in 2020 with SOLID Wheels and Changed the Design

Thanks for this helpful advice.