- 26
- 138 962
Tony Leung
Taiwan
Registrace 20. 06. 2012
记录生活里的各种倒腾。
大家好,我是爱折腾的TONY桑,欢迎来到我的频道。
Recording DIYs in my life.
Contact:
Facebook messenger: m.me/tony.leung.7165
Instagram: tony1157cn
大家好,我是爱折腾的TONY桑,欢迎来到我的频道。
Recording DIYs in my life.
Contact:
Facebook messenger: m.me/tony.leung.7165
Instagram: tony1157cn
Making a power cube -- use of the Ninebot scooter internal battery | 制作能量盒子,九号滑板车电池再利用
After repairing the Ninebot scooter, I got some internal batteries. But the voltage is too high for daily use. And fortunately, I found a DC/DC converter that has a wide range input voltage of 36 - 65V, and output 12V 30A. It's good for the batteries.
Let's make it!
datasheet of the converter: www.murata.com/-/media/webrenewal/products/power/datasheet/hph-12-30-d48.pdf
you can purchase it on eBay if you want to make your own cube.
Let's make it!
datasheet of the converter: www.murata.com/-/media/webrenewal/products/power/datasheet/hph-12-30-d48.pdf
you can purchase it on eBay if you want to make your own cube.
zhlédnutí: 106
Video
How to flash Ninebot ES battery BMS | 如何烧录九号滑板电池固件
zhlédnutí 12KPřed 2 lety
This video shows how to flash Ninebot ES battery BMS. files you need: drive.google.com/drive/folders/1emq8QpUmxHkMYXvHIjdRLou5lsYleCt3?usp=sharing or here: www.dropbox.com/sh/eucab7vfh7uiynl/AAC3_OVpHOssZLnK4V1J9vVUa?dl=0 Tips: write down the UID shown on Data Memory, marked with a red frame, when the new data is programmed, modify it to the old one.
How to replace Ninebot ES Internal Battery BMS | 如何更换九号滑板车内置电池BMS
zhlédnutí 9KPřed 3 lety
I replaced a NineBot ES2 Internal Battery some days ago, the battery has a short life, but the production date is very new. I think the battery cells are good, so I decided to replace the BMS to rescue this battery.😂 background knowledge: BMS - Battery Management System 前几天我更换了一块九号滑板的内置电池,电池续航很短,但生产日期很新,我判断电芯是完好的,所以准备更换BMS来抢救一下. 背景知识:BMS 电池管理系统 TimeLine 00:10 Tools you need 需要用到的工具 00:15 A new ...
How to Replace Ninebot ES Internal Battery | Disassemble & Assembly TIPS
zhlédnutí 41KPřed 3 lety
My Ninebot ES2 had a poor battery life recently, it was found that two cells of the battery could not be charged, so I decided to replace it. English sub include 我的九号滑板最近续航很差,经过排查发现其中两组电芯无法充电,于是决定更换内置电池。 00:10 Tools will be used 需要用到的工具 00:14 Disassemble Tips 拆解 01:22 Tips to unlock the waterproof lid 拆卸防水盖窍门 01:44 Now you can get the battery 取出电池 02:01 Tips to detach battery and DRV 分离电池和控制器的要...
Tutorial:How to install MIJIA M365 3rd part front shock 如何安装米家M365减震前叉 subtitle include
zhlédnutí 5KPřed 3 lety
This is a tutorial on How TO install MIJIA M365 front shock. Ordered from: www.aliexpress.com/item/1005002053585552.html 00:26 Overview 00:29 Tools that needed 01:35 Remove front wheel 05:02 Remove front fork 07:14 Install new fork 10:24 Install front wheel 12:12 Regulate and tighten screws. Thanks for watching, if you like, please subscribe to my channel.
How to flash MIJIA M365 BMS -- Part II Flash the BMS -- Subtitle Include 如何烧录修复米家M365滑板车电池保护板
zhlédnutí 4,1KPřed 3 lety
This is an M365 battery that uploaded a Ninebot BMS FW. It can not work, so I decided to take out the BMS board and reflash it. This is the part II, shows how to flash it with STLINK. Felling free to contact me if you have any questions. Subtitle Include. 这是一块误刷了Ninebot 电池固件的小米电池,无法工作,电池指示灯熄灭。 为了挽救这块电池,决定拆卸保护板重新刷写程序。 这是影片的第二部分,介绍如何刷写程序。
How to flash MIJIA M365 BMS -- Part I Take the BMS board out Subtitle Include 如何烧录修复米家M365滑板车电池保护板
zhlédnutí 5KPřed 3 lety
This is an M365 battery that uploaded a Ninebot BMS FW. It can not work, so I decided to take out the BMS board and reflash it. This is the part I video, shows how to take the BMS board out. Subtitle Include. 这是一块误刷了Ninebot 电池固件的小米电池,无法工作,电池指示灯熄灭。 为了挽救这块电池,决定拆卸保护板重新刷写程序。 这是影片的第一部分,介绍如何取出保护板。
Making a double female 3/8 adapter| 制作双头3/8 连接器 | 三脚架转接器 | Fusion 360 | 3D printed
zhlédnutí 45Před 4 lety
我的三脚架和手机夹子都是3/8寸接口的螺丝,有时候我需要把他们连接起来。所以我设计并打印了这个3/8寸双母头连接器。 As all of my tripod and phone clip bracket has 3/8 screws, I need to connect two of them together. So I made this adapter to connect my tripod and phone clip. Designed by Fusion 360 and printed by Anycubic 3D printer. If you like my videos, don't forget to subscribe to my channel. THX Background music: soundcloud.com/
Making a Phone Cooler | 制作手机散热器 | Fusion360 | 3D Printed
zhlédnutí 574Před 4 lety
我的手机在玩游戏和看视频的时候变得很热,所以我决定自己做一个散热器。用Fusion360开始建模,打印零件,然后用容易购买到的一些元件,我制造了这只手机散热器。 My phone gets hot on playing games and watching videos. So I decide to make a cooler. Starts with Fusion360, 3D printed all the parts. with some easy-to-buy parts. I made this Phone Cooler. STL file: www.thingiverse.com/thing:5221745 材料 Materials: 3D 打印件 3D printed parts 螺丝 screw M3x12 x1 M3X25 x1 螺帽 nuts M3 * 3 12...
Making a Ninebot ES2 brake wire holder | Ninebot ES2 rear brake modify | 制作刹车线的固定座 | 爱折腾的TONY桑
zhlédnutí 462Před 4 lety
因为改装的关系,刹车线裸露在车外,在展开的时候容易引发安全意外。 所以我制作了这个固定座,用来固定飘逸在外的刹车线管。 Because of the modification, the brake cable is exposed outside the scooter, which is likely to cause a safety accident when it is unfolded. So I made this wire holder, used to fix the floating brake wire. If you like my video, Just give me a "LIKE" and don't forget to subscribe. THX
How to fix a Logitech Anywhere MX Double-click issue | Micro Switch replacement | 罗技M905拆解及微动更换
zhlédnutí 2,9KPřed 4 lety
这个鼠标已经使用了六年多,最近出现双击,左键失灵等问题。挺好的一款鼠标,于是决定替换微动进行修复。 Logitech Anywhere MX (M905) is a very good mouse that I have used. However, after more than 6 year's use, some problem has occurred, like DoubleClick, lost focus and etc. So I decided to fix it. 0:10 使用超过六年的伙伴 My M905 that used more than 6 years 0:25 拆解 Teardown 02:02 拆卸微动开关 Unsold the Micro Switch 02:58 安装新的微动 Replace a new Micro Switch 03:38 组...
How to flash your Ninebot Scooter with an Arduino | Ninebot Scooter Modify | Ninebot es2 | 九号滑板车
zhlédnutí 3,2KPřed 4 lety
上一个视频之后,有人问找不到2303的转接板怎么办。今天就介绍给大家另一种方法,使用Arduino的开发板来做这个工作。 视频中使用的是 Nano 系列,同样的方法,Arduino 全系开发板都可以做此操作。 In today's video, I'm going to show you how to use an Arduino board to flash your Ninebot ES Scooter. Subtitle include, you can use 'Auto Translate' convert to your native language. Thanks for watching!
How to make a Ninebot ES Flash Cable and Downgrade BLE to 107 | 如何制作一根九号滑板车刷级线 | 109蓝牙降级
zhlédnutí 1,1KPřed 4 lety
通常情况下通过蓝牙的方式就可以联机 而在蓝牙无法正常连接的情况下 原始的TTL模式就派上了用场 幸而Ninebot ES提供了这种模式 今天就跟我一起 用比较容易找到的材料 一起来制作一根联机线吧 材料: 旧电脑4PIN电源线1根 2.45 连接线3根 PL2302 USB 连接器一个 工具: 尖头镊子 1MM钻头 时间线: 00:30 小头部分 01:25 GND线(大头线) 02:40 连接PL2303 03:20 降级BLE
How to fix Error code 14 | 15 on Ninebot kickscooter ES1 | ES2| ES3| ES4 如何搞定烦人的14和15号错误 | 九号滑板车
zhlédnutí 34KPřed 4 lety
烦人的14和15号错误,如何拆解指拨油门和刹车及修复它们 The Annoying error code 14 & 15, How to disassemble and fix it! 00:10 如何拆解 How to disassemble it 00:26 拆解的关键 Disassemble tip 01:08 出问题的地方 The key point 01:04 组装 How to assemble it 01:45 组装关键点 Assemble tip Thanks for watching, if you like please give me a like. Thanks.
Making a perfect rear wheel | Ninebot Kickscooter disc brake modify 九号滑板车碟刹改装 | 制造一个完美的后轮
zhlédnutí 4,9KPřed 4 lety
经过一段时间的使用,发现原来直接加工的螺纹孔有了一些松动,于是在原来的基础上做了一些升级改造。预埋金属螺母,同时改造了一下碟片,这样整个后轮就完美了。 After a few days of use, I found that the disc has loosened, so I made some updates to make the Thread stronger and the Rear-wheel more perfect. 00:20 拆解检查 checking 01:30 拆卸爪盘 remove the paw 02:05 用到的螺丝 screw what I used 02:30 扩孔 make the whole larger 03:13 压入预埋螺母 install the thread 03:58 重新装回爪盘 install the paw 04:29 改造...
How to fix a power wheel issues | YELANGU L4X Unboxing Teardown and Fixing
zhlédnutí 176Před 4 lety
How to fix a power wheel issues | YELANGU L4X Unboxing Teardown and Fixing
How to install screw threads | Ninebot ES2 REAR disc brake Modify
zhlédnutí 472Před 4 lety
How to install screw threads | Ninebot ES2 REAR disc brake Modify
Making a multifunction Straight Hole Drill Guide and HOT PRESS Thread Install tool
zhlédnutí 223Před 4 lety
Making a multifunction Straight Hole Drill Guide and HOT PRESS Thread Install tool
Ninebot ES2 rear DISC BRAKE modify GUIDE | 九号滑板车 ES2 | 碟刹改装
zhlédnutí 11KPřed 4 lety
Ninebot ES2 rear DISC BRAKE modify GUIDE | 九号滑板车 ES2 | 碟刹改装
九号滑板车碟刹改装 更新铝合金碟刹座 Ninebot ES2 rear disc brake modify, update to Aluminum base
zhlédnutí 418Před 4 lety
九号滑板车碟刹改装 更新铝合金碟刹座 Ninebot ES2 rear disc brake modify, update to Aluminum base
九号滑板车ES2后碟刹改装记录,手制了一只碟刹底座。Ninebot ES2 rear disc brake modify recording
zhlédnutí 417Před 4 lety
九号滑板车ES2后碟刹改装记录,手制了一只碟刹底座。Ninebot ES2 rear disc brake modify recording
Ninebot ES2 rear wheel brake handle TESTING
zhlédnutí 2,2KPřed 4 lety
Ninebot ES2 rear wheel brake handle TESTING
九号滑板车ES2碟刹改造 Ninebot ES2 rear Disc Brake modify
zhlédnutí 703Před 4 lety
九号滑板车ES2碟刹改造 Ninebot ES2 rear Disc Brake modify
改造三方适配器给九号(小米)滑板车 Modify a third part adapter for Ninebot ES / Xiaomi M365
zhlédnutí 264Před 4 lety
改造三方适配器给九号(小米)滑板车 Modify a third part adapter for Ninebot ES / Xiaomi M365
制作带保护层的皮革夹子 Making a Protected Leather Clip
zhlédnutí 40Před 4 lety
制作带保护层的皮革夹子 Making a Protected Leather Clip
Hello, I have the following problem, the Ninebot ES2 scooter stopped turning on, the BMS board lights up blue continuously, can you tell me what it could be? Thanks!
Normally, the blue light blinks on standby and continuously lights up on working status. I guess there are some communication issues. You can try disconnecting the plug from the mainboard for a few minutes, then reconnect it and try to turn your scooter on.
i know this video i 2 years old, but i saw that you ha ad 3d printed cable routers/ do you happen to have the download file for that?
pardon? what file do you need?
I modified the SN according to your method, and the BMS LED blinked blue, indicating no problem. When the motherboard was plugged in and turned on, an error message of 22 appeared. When using Ninebot Flasher to connect and read data, the SN was not modified. I strictly followed the red box in the video to modify it. May I know where the problem occurred
Error code 22 means BMS config error. Have you modified the UID in DATA memory to your ORIGINAL one? UID is the unique identification of the chip, Not the SN for the battery.
@@tony1157cn Thank you for your answer. Following the instructions in the video, I modified the UID marked in red. Before burning the firmware, my battery cannot be charged, and it discharges normally when plugged into the control board
@@kialison Modified the UID marked in red to your ORIGINAL one or the same ID in my video? rewire and check it. BTW, many reasons that can cause the battery not to charge, Rewriting firmware can fix some of that not caused by hardware.
@@tony1157cn I modified UID to the one I backed up ,Yes, I'm not sure if refreshing the firmware can fix the charging, I just want to give it a try. However, now I'm getting 22 error. Can it still be fixed?
@@tony1157cn I tried using the ninebot application to upgrade BMS to 1.6.0, Error code 22 disappeared. It's amazing, but it still can't be charged. I will continue to try other ways, thank you very much
Tony你好 我的ES2 滑板車近一年沒用了 然後再想用的時候發現不能開機 也不能充電(charger綠色燈長亮而電池是沒有任何燈亮)我試過youtube的jumpstart 電池 成功令電池的紅色燈閃爍 但連接charger後仍然未能充電(電池紅色燈繼續閃爍 而charger仍然長亮綠燈)是bms出問題嗎?還是電池電壓太低?
放置太久的话很可能造成低压保护。电池是已经拆下来了吗?如果有万用表的话可以尝试量一下电压,低于32v的话BMS可能已经保护了
Thank you Tony. I had to learn to dismantle this.
您好,我的es2因為一次不小心手機按到更新韌體後,整個加速變得很溫和,速度一樣都可以到30km,但是到達的時間慢了點,更新前油門壓到底人站在車上是可以打滑衝出去的,但更新完就不會了,請問有辦法降級韌體嗎?我的韌體版本是主控v1.6.4電池1.4.9藍牙1.0.9
I have enough Samsung G30 cells to make a few packs, wondering if the bms needs to be flahsed in some way to read the new 6ah capacity instead of the original 5.1ah
You need to modify some bytes in the HEX file, I guess
Hi tony can u please help for the love of god? I'm getting an error when i try to read out (everything is connected and soldered just fine) says cant communicate with the tool wrong tool selection or check tool power supply or check that a previous session is closed, check and install rlink driver (which i also done on the start menu)
rlink? but st-link is recommend
所以通常跳出故障碼應先檢查是否是油門磁鐵移位了是嗎? 請問有其他方法能聯絡到您嗎?
不一定的,只是error14和15的話先檢查插頭是否鬆脫,然後有能力拆開的話檢查霍爾感應用的磁鐵是否移位。
Any tips on what to check for or fix when getting error code 21?
Como puedo reparar el Bms titila rojo u las celdas esta con voltaje normal
try reflash firmware, here is the guide:czcams.com/video/YoobPSSkObE/video.html
我有个SEGWAY NINEBOT S 平衡车, 其实是GOKART PRO, 现在按电源没有反应,充电也没有反应,反正无法开机,插上充电的时候充电器一直是绿色亮灯。我把电池拆下来, 电池上面的LED灯是蓝色一闪一闪的, 电压测试也是59.4,估计这个电池没问题, 但是我又把电池装回去后,按电源键,就BEEP一下,没有任何其他反应,和断电了一样。请问大概是哪里出问题,谢谢。
Can a second external battery be connected to the front of the ninebot e45d? So I had one internal and two external batteries? how can i connect together ?
Thank u so much ❤
正负极焊点为什么弄不下来,要用多少度的电烙头还是别的工具
因为焊点比较大,散热相对比较快,所以需要功率大点的烙铁。高频涡流会比较容易焊接,普通电烙铁的话建议80W+
Whats your mail or wechat
Do you have problems with it?
Quindi se lampeggia. Il led cosa vuol dire
Hi I recently bought a bms for my ninebot es battary I installed the new bms but it doesn't flash is any colour is that means that it's a faulty one or I need to flash it
Is the BMS an original one? If it is, check your battery' and each cell's voltage. If the whole pack is lower than 36V or any of the cells is lower than 3.2v, the BMS will not work. try to charge it
my battery had a red light on why?
low voltage or communication error
Hi Tony, I did the entire process of the video without problems, but in the end the blue or red LEDs don't flash
Amazing video Tony! The video was extremely helpful as I had to replace my internal batteries too. Keep up the good content!
Thanks
Thank you Tony, i put a new STM chip, can you tell how to find the UID to use the old serial number of my battery please, i have flashed bin and save the SN with IAP, but counters are at zero and APP give a bms Key error, i think is the UID missing, error 22
@@Btrashtein you wont the chip ref name? Is a STM8L151K6
这个转换头叫什么名字
5.5*2.1母转8.6*2.1公
Hi can you help me to my es2 ...I woke up this morning my es2 always on and off its so annoying becouse it so noisy I try best to fix it but still on and off
Hello. I replaced the BMS on my es4 internal battery since it wouldn't take a charge anymore and the light was out on the board. New one is installed and now I still have no light, but if I push the button on the bms board, it goes solid blue for about 2 seconds then blinks red for probably 5 seconds and goes out. Are my batteries just no good anymore? Thank you!
check your battery and each cell's voltage first. lower voltage will cause no light
Thanks for the tutorial, I have a second hand ninebot es2 that have error 21 and the main board has no error and I think it due too the bms, do you think if I try to flash the bms with this method it might fix it ?
check the 4 pins connector and wires first. I've met some error 21 caused by connector loose.
Hi Tony, thanks for guiding us on the repairs. I changed the battery and it was blinking blue, but it continued to give me the same error as before (red wrench display on screen). Would I need to change the computer itself? Or it could be something different? If you have encountered this issue, would you mind guiding me on this? Cheers
Just asking but normally with the red wrench there is an error showing up briefly (it even beep) If you get this error number (or get it on the app) try searching what the error code it connected to (for exemple, it can be the throttle that got water damage and is giving error, or some component that have moved and causing an error)
Hello, Is the same for the external battery es4? Thanks
Nice build. Love the cube!!! just found your channel and I really enjoy your content. Subscribed!
I bought a new replacement batt, when i check, it wasn’t flashing blue. Should i return it or i need to charge it first?
Please help. My battery is not charge. The blue led on my old battery flashing like in your replacement battery. I replace a controller and original charger but still no indication of charging. The green led on the charger is always on.
@@tony1157cn thank you for your response. No errors apear in the segway app. But was needed update. Still no charge and green led on the charger. Any other ideas?
@@tony1157cn yes
@@tony1157cn can you please explain me how?
Tony哥,商家给我发错了碟刹装置,如果跟回你的视频然后安装右边行得通吗??
Hi Tony,请问那个碟刹有分左或右的吗?
碟片不分,夹器和固定座要分。需要左边安装的
@@tony1157cn 商家给我寄错了,寄来了右边的,那碟片,夹器也得变右边,行的通吗?固定座也有点走位了😅🥲
@@andersonong4404 理论上可以,但是固定座你得自己想办法调整匹配一下
好的,谢谢你。。全部返反向安装,轮胎的花纹也返反向了。。担心会有问题。因为你的3D打印硬件全是左边的😅😅要慢慢捉它的安装的位置😥
@@andersonong4404 如果你把轮毂整个反向的话,可以把外胎重新安装成正向,防滑会好一些。
Hi, thank you for this video. My battery blinks red for some seconds when putting under charge, but then led just goes off. My charger stands near to my friend charger (for xiaomi), maybe i've wrongly tried to use his charger and battery died? What can I do?
you connect the battery to charger directly? not through the charge port on scooter?
@@tony1157cn No, I connect using the charge port on the scooter controller that's connected to the battery. It blinks red 9 times when plugged and then stops.
@@pandalquellovero I haven't met this situation yet, do you have multimeter? check the voltage of the battery. I guess there is something wrong with the BMS.
@@tony1157cn Not here.. I'll ask to some friend or I will bring my multimeter after christmas vacation. In the meantime I'm waiting for a reply from ninebot support. Thanks a lot for your help.
Los archivos gracias
Hello, thank you for the video, I have two questions: 1) What exactly can you fix with this method? 2) I have two unbalanced BMS, the cells are perfectly balanced at 3.7 V, but, but i connect the bms and check through an app, the difference between the cells is different. It only happens with those 2 bms, I have a third BMS but it marks the actual values of the cells. Do you have any idea what component may be failing? Thank, I will be grateful for any help you can give me.
This is an unofficial way to reset the BMS to the factory model, sometimes when upgrading the firmware through BLE, it could be missing some data, and it will cause some problems with the BMS like cannot charge, counting errors... etc. Q2: What kind of BMS do you have? Usually, a simple BMS contains a battery management chip, the balance is controlled by the chip and some outside resistance. the precision depends on the resistance-chip unit. and some BMS use an APP to trans and display data, the precision is converted by the chip and based on its ADC (an example, the counting results of 1/1024 and 1/1023 are different). so the voltage value will be different between BMS and BMS even the same brand.
Hi Tony. Thanks for the video. I got my battery charged and now it’s solid blue. Measures 42 volts with multimeter. Any suggestions?
@@tony1157cn thanks for the reply. The battery was completely dead after not being used in a long time. I “woke up” and charged the battery to full.
@@tony1157cn that seems very likely. I will try my best to do the repair (I don’t have much experience with lithium batteries). Thanks for the suggestion
is ES2 internal battery the same as E25E internal battery please answer
As I know, the E series batteries are the same
Hi, what is the BMS version that you put on the link? Can you explain how can I convert a .bin file to .hex?
I remember the version is 1.3.6, you can update it through the official APP. I am sorry, but the .bin and .hex are different types of files, and I don't know how to convert them.
How do I flash the controller, so it does not require data connection to the BMS?
hello thank you for the video why we flashing bms what is the problem we can resolved when we falshing thank you
Thank you for uploading this video. I am very grateful for your hard work in filming, editing, and subtitling the video.
Thanks
Where can i get replacement mine looks like is spining and dosent grab the gears
Thank you so much!!!! 🙏
hello friend a query this process also solves the bms when only the red light comes out and no longer blue?
This video helped a lot. Thank you. Stupid business here in NYC that sells scooters don't have mechanics that knows how to fix them. They only fix the electric bikes / mopeds.
Where can you purchase a replacement battery?
Alguien que me tradusca
What about if the light is blinking red what does that mean
when charging the battery, the red light blinks; when there is something wrong whit the battery, the red light blinks;
I cant disconnect the brown cable with removing the pole