Video

Echo...Echo...Echo...Echo...

Thanks. I have a 2006 nissan sentra gxe and I needed this.

Can you show a video replacing sway bar bracket bushing replacement for both front and back?

I stripped the head on the last bolt to come out. Show a video about fixing that nightmare. Ten minutes my a$$.

Thats so dumb. Why yoda??

what are the torque specs for the strut tower?

Nice work!

This was a good video thanks!

Good job, if the shock doesn't go through the spring it goes on really easily. I will allow myself 2 notes from practice: 1. always clean the seating surface of the upper bearing carefully. Often there is dust, sand or rust and this will prevent perfect seating. The second note is about tightening - I recommend putting the car back on the wheels and "rocking/pushing" it from side to side before final tightening.

Thanks!! You save me. I have no idea how i can do it. You can make another video doing the fuel change?

What a terrible design

insane vid, I can't even get those guide pins out.

Dude, this video is picture perfect on how to change a lightbulb. So concise and cleaaaaaan! Thank you so much, I feel anchorages and confident to get this shit now, hell yea! (Also, sweet jontron bit lol)

Dude….. was wondering for the rear wheel bearing. Is it possible only replace the bearing? Meaning using back the old hub. Thanks

Super helpful video, helped me a ton. Thanks!

how many sensors are there. My wife's car is a 2016 tucson sport 1.6l

should I run the generator for a few minutes first?

Did you have to jack your hyundai up for this??

Here because mom's accent needs new Alternator. Stayed for awesome trip hop music 🎶

You give me hope that I can do this! Even though I’m still nervous to do it

THANK YOU SO MUCH! Just the video I was looking for!

Thanks for an excellent video on this process. That tip on the 12mm bolt will save my sanity. Now to get the parts for my 2017. Keep up the good work!!

I have a 2020 and my brakes are completely different

How often should we change the oil? Why did one side of the circuit plug stop working? Just purchase on Thursday 7/12/2024. I have just changed the oil. Good and simple instructions without any long talking. Thank you sir.

Very detailed video, thanks I changed it myself because of your video, and saved 350 dollars.

how tight do i tighten bolt for the belt

I have a Kia Rio 2013. You videos on maintaining kia rio is absolutely helpful! Thank you so much and kindly share more repair job for Kia Rio. 👍🏻👍🏻

Was that a breaker bar you was using for that top bolt

So you didn't have to press them together? Did you buy them already complete?

What engine is this. Put that in the video description...

Straightforward, until you get to the frozen-in-the-bushing control arm bolt that make this impossible for a driveway mechanic! Another classic all-day "30 Minute" job.

Thank you!!

Thanks. Works perfect. My Accent is low to the ground and hard to get a jack under. That's my only challenge.

thank you for your work bro !! this was exactly that y needed. Well Done.

10w 30 or 15w 40?

That's some good looking oil! Lol

Did these struts ride nice after installing?

man you don’t know how this helped me, got it done in 20 minutes. thanks!!!

I highly suggest to stay away from after market quick struts like these in order to keep original ride quality. Use OEM shocks or at least KYB and keep the original springs but you won't be able to do it yourself though without special tools.

Great video! More ppl should know about this Channel 🤙🏽

How do you release the tension off the belt?

What are the torque specs for end links? Or did you just tighten as much as possible?

Your video was a huge help thank you. I did my 2016 Highlander XLE today. As has already been mentioned there was a second hidden bracket on the passenger side with a 12mm bolt that is a bit tough to reach. I took this bracket totally off to remove one of the rear spark plug coils. My air intake had a combination of 10mm nuts x 2 on the ends, 6mm allen head bolts x 4 in the middle, and the two hidden 12mm bolts in the back. In total taking my time it took me 2.5hrs. The local Toyota dealership quoted me almost $600 in labour alone for this job. The video is very helpful and I found the job not too bad if you take your time and you have all the right tools.

Chingon Gracias 🙏

U need to invest in better tools playa

Glad I saw this beforehand. I see you used a hammer instead of a pickle fork. Thatll save me money.

Thanks for posting this video it was most helpful insight in what i needed to do for the same job. The second wheel did actually take me 20 minutes.

What if i don't have a caliper tool?

Nice 👍

I just bought a 130k miles 2019 Highlander. No clue if this was done at any point so… I guess I’ll schedule some time to go through that. Great tutorial I’ll watch more of your stuff !!!