Video

jajajaj su ingles

Holy crap. That's insane to find all that wire damage

Cuanto saldria esa reparacion?

El distiburru,, es el distribuidor😂😂😂

Thanks for the video. This helped me solve a very frustrating problem where the brake lights would not come on, but I'd already replaced the switch and relay. I also had ABS and traction control lights on and I didn't think the issues were related because the ABS lights had been on for months!

Que?? No le espeko el espanol

Gracias! Mucho mucho gracias!

What is the year of it?

It is accessed from underneath the car.....the crank sensor is located just below the starter and under the little metal cover with 2 10mm bolts on it....Only way I could reach the sensor bolt was with a 1/4" breaker bar and 10mm socket..... a 1/4 socket swivel would not fit for me but the Craftsman 1/4" breaker bar did

Esta muy pendejo

This is nice. Ive had an issue with the gas pedal randomly not responding, the car dying but then at other times be fine. Had the alternator checked and its not charging consistently

why make a video that tells nothing.

Do got a removal video. Appreciate this much!

Great video to show where the crank sensor is !!! I used a Craftsman 1/4" breaker bar and 10mm socket with a big flat blade screwdriver wedged in between the top of the socket and the axle to hold the socket to the bolt to crank it out.... Was a PIA but only used the 10mm socket and didn't have to remove axle or anything else other than the little metal cover in the video.....

Thanks for the tips, and for the video!

Thanks for this. Do you remember what year the new engine was? I'm replacing my 2009. Trying to figure out if newer 4b12's can be used.

Hello .. I have a Toyota Tokuma 96 .. It starts for a minute or less then stops. All the fuses were checked and everything was fine. The electricity does not reach the crankshaft sensor nor does it reach the injectors. What is the solution. Does anyone have an idea about this fault? The crankshaft sensor was replaced but to no avail.

Thank you so much you are great!!!

Habla español

Do those hydraulic jacks ever fail? Just wondering because I have one that's at lease 25 years old. Finally had to add some jack oil to it recently.

Y not tienes chispa en las bujias????

Excellente a la mia le pasa lo mismo pero tiene precion de gasolina???? Pero no prende??

Are you saying when it's all three together it's likely to be this specific issue?

If you all wondering (do I need to remove the passenger side axel?) answer is no. Although is easier to get to but you do not need to remove the axel. Use a 1/4“ swivel, 10mm socket, and long 1/4” extension. Sneek it between the axel. You may need to turn the axel at the base where there are grooves. It’s doable, trust me

Te la rifaste bro gracias me funciono con mi carro

It has a lot of noice in your video

Me gusta que tratas hermano, muchas gracias por tu esfuerzo

Thanks! Called my local Honda dealership and they wanted $250 to replace my driver side visor. With your help, I easily removed the broken one, spent $50 on Amazon for a new one, and installed it in 45 seconds.

In spanish please

Pero si ese sensor está metido en el motor y por ende tiene contacto con el aceite del engine, seguramente al limpiar el conector con electro cleaner se soluciona el problem, al cambiar ese sensor se tiene que calibrar la posesión correcta osea la misma del anterior

Good job thanks friend

Dear for the nissan sentra b15 2005 is the same? Thanks for your reply.

can i just replace the mirror instead of the whole assembly? I bought the mirror glass only as that was the only thing broken.

Man my heat and Ac don't work on driver side I replaced heater valve flushed the core the actuators are moving idk what to do and this heater box is scaring me if that's the issue I'm fkd

Thank you for the help! We just replaced my visor and my eyeballs and I just had to thank you!!!

Thanks man I’m about to do this today. I think lifting engine makes easier but I’m going to try without!

Que?

What was the problem?

😮

Omfg thank you other videos say hold it and turn on key and it don't work

Did you fix this problem?

Go back and do some homework, you put that distributor way off.

Thanks for video….. Did you fixed? What was problem?

Can you leave it out if you get the nut and washer?

Can you leave it out if you get the nut and washer?

You mean backwards? Alternators are rotational so being upside down is still spinning the same direction.

Anyone fixed the problem

I had the same problem. You need to push the brake pedal down and then put it in so it has the room to go all the way in, otherwise it will break like in the video.

Hello

Debería haber un hack para quitar ese tipo de sensor es mucho lo que restringe la entrada del aire al motor