Video

Which way do you rotate for more or less hot water???

What hex screw driver number i need to use?

You can tile on the sheet rock? Cool man

Thanks! I have the same one and trying to figure out why the drive gears are grinding, or where to get replacement ones. They are so sloppy and have so much play that they wear out quickly.

Brand new out of the. Box can't get it stated hot the weed eater started no problem but not the blowerw

Can you run a AC System with this?

I did this fix on my drain pipe for a temporary fix. I used the stuff that works on wet surfaces, but i still dried the area as best as I could. Then i cut a pair of rubber dish gloves and wrapped it around the pipe and tied it until it dried to prevent the puddy from forming any air pockets underneath from any residual water leaking out. (I didn't fully trust the epoxy). Sure enough, it held! Then I covered the entire circumference with liquid epoxy for metal, such as JP Weld. It's solid and not going anywhere, and gives me time to save up for a plumber to redo the pipes.🤙🏼

That thing looks quite decent 👌

Lowes sells Honda plugs and 10W-30 oil but not the air filter.

Okay, did nobody else know this problem was basically a PEBKAC? The brush wasn't turning because the pedal that stops the brush from moving was depressed. And he fixed it by actually hitting the pedal a second time to reengage the brush.

There was nothing wrong with his belt - he simply had the Brushless switch thrown. I didn't even know my 25 year old vacuum had this setting until I watched this - and I watched it because my brush was not moving. Then I saw the switch had been thrown. Arrrggghhh!

Sorry you wasted your time and money on this gimmick and sadly many others on here will too.. I used the piece of copper pipe in the skimmer method many years ago and yes it works, no electricity needed, never any algae at all. However about 10 years ago I discovered Copper Sulfate and started using it. I have a 13k pool and use 1 tablespoon diluted a month. Never ever have I had any Algae since. No green hair, no pool stains on my gunite pool here in Florida. Stop listening to these people who don't have a clue, maybe they work for pool companies or don't even have a pool. So may gimmicks when this is the easiest cost effective solution out there.. Look at the ingredients of most pool Algaecides 5-7% Copper Sulfate. When you buy Copper Sulfate small crystals (Amazon, eBay) and dissolve it, it is 20% concentrate so don't think 1 tablespoon a month is to little, adjust if your pool is larger. That is all you need and you'll NEVER have Algae again. The key is Don't over do it thinking more is better, it's not. It does reduce the amount of Chlorine you use but not by a significant amount. Do the research, stop wasting your money.

Thx! Most helpful video for me!

Ordered some. Great vid

You gave no instructions you just talked the whole time

Thank you for this video.

I need a person who can install door lock .

Thank you!!

I replaced the belt, but the problem stil there?

Best video ever

Fuck that stud, don’t need it

You saved me hours, and made it pretty fun. Cheers.

I want to install this system but my pre-plumbing has a drain pipe connecting directing into the water supply line, what am i supposed to do with the drain line?

How about plastic heating oil tank drip with head pressure! Was told cant be stopped.

It takes heat too?

I'm running an experiment - 7th year without doing ANY maintenance on my mower - a Jonsered with a Honda engine and still starts right up. Blades are a bit dull... going to do maintenance today! 1st time since autumn 2017.

Yes, this does improve security. Especially with doorknobs. Centering lacthguard on deadbolt would improve the looks. I would mount latchguard closer to door jam. Drilling both sides of door would prevent splintering.

hi i have a bedroom door that is to big to close do you think this will cut it down a bit?

Such a hack job with the plumbing.

Great job. thank you. This was very helpful and informative as stated below. It covers all of the features and goes beyond what an 'unboxing' video normally does!!! Thanks !! Bill G. Melrose Ma

This chair was one of the most frustrating experiences I have ever had with furniture assembly, because when I screwed in the left side of the back piece to the seat, the right side didn't want to line up or hold steady. But after watching your video and getting some tips, I finally got it! Thank you!

I have this exact refrigerator/freezer. Mine is ice cold on the bottom of the freezer and in the middle but the top shelf is a constant 50 degrees. The refrigerator side is a constant 40 degrees. It's been like this for three months. It's a spare basement refrigerator so I haven't taken time to look for the problem.

Hi sir, what issue could be if even I align the hotwater to the max position, but the tempretrue is not high enough. my heater is setting to 140F, which is also max there. Can I further limit the cold water comes in?

I just bought the string trimmer/leaf blower combo. I tried the trimmer but have not yet tried the blower. Thanks for the demonstration.

lol… why would you think people would accuse you of hiding something?

Thanks for uploading!

If tool is 90 psi, on out let nothing happened if I put 250 on OUT LET

Perhaps a bar of soap used to lubricate inside and outside the saw before drilling would make that plug much easier to remove, my friend.

Same here😂

How long you have to charge it for when it runs out out

If you dont have this peace will it effect your shower pressure

Thank you SO much - you probably saved me a bunch of $!

You have the cord from the pump motor connected directly to a 1900 box. Definitely not code.

#1 Throw away that cheap Home Depot gun #2 get better gun at harbor freight. More breakaway torque #3 Home Depot/ husky impact wrench breakaway torque is probably near 400 lbs Most car lug nuts are at 250 So yea the lil pancake compressor can breakaway the 250 lbs torque

Lol why not just drill out the plastic wing bolt out and replace it 😂

So Again mulch mode is a waste because it doesnt do a good job...recommend a lawnmower that actually works

THe mulching is horrible all I see is clumps

Thank you so much for this video! I am a visual person and was totally lost without this video. Have a great day 🎉

Can’t be more American than this 🤙🏻😎

Thank you!