Video

Why nobody shows the gun from the back! what the rivet gun has in the hole behind it

My portable unit is brand new and making my room humid. Can this be fixed?

Thank you, very helpful!😀

Awesome video, thank you! Super helpful as I'm just renting one to finish a bathroom 👍

This was riveting. Really, most helpful. Have a rivet gun that I bought then didn’t use. 🙄 But now I do need it and know how to use it. Thanks!

This was riveting. Really, most helpful. Have a rivet gun that I bought then didn’t use. 🙄 But now I do need it and know how to use it. Thanks!

if you put carbon steel in vinegar, it will turn it black and make it less prone to rusting. I do this to my camping tools, or my Mora knives to prevent them from rusting up.

Good video my man 😎. Some sound advice. I cleaned up some rusty things for my wife. I used the hydrogen peroxide and bicarbonate soda method, but i used cling film. Put the paste one one side, then set it down, paste side down, then apply more paste to cover the exposed side. Wrap the cling film around it and leave it for around 30 - 45 min. I like casual scientific educational videos. Thanks. 👍🏾

Mind blown, I had no idea this tool I bought decades ago could do all that. Excellent tutorial.

Thank you, I got all the info I needed from you. ❤

Do I need to use a paint filter? What about thinning the paint?

When my blade is in the down and back position my blade is in the middle of the throat plate(yellow/green plastic guide that the blade slides back and forth in) but when I slide my saw forward my blade pinches against the left side of the throat plate when it gets to the end of the forward slide. So my blade is not centered in the throat plate. How do I adjust that?? The blade is square to the fence and the blade is square to the table, and both miter positions are locked at zero.

Excellent video mister! At last some proper explanations! Greetings from Belgium.

Thanks. Do you align the blade before the fence or it does not matter which you do first?

Thank you a very detailed but simple explanation!! 👍

Thank you for this video

Junk that fucking junk gas can. You're just looking for trouble try to use that contraction 😮

Awesome Job

Very good instructions!

Informative video, definitely getting one of those drain snakes.

Thank you for the good explanation. I used to work in apartments and our make ready guy would always have trouble with this machine. He never cleaned it properly and it would always clog up, I still remember him kicking the machine in frustration losing his mind. I only had to watch this video to learn more than he ever knew.

Great video. You have a natural gift for teaching.

Great and well done video

What about underneath wood floor?

Ribbon fiber should only be used for long haul. That enclosure will be a mess in no time.

Quick tip for those who don't know, most vehicles have a small arrow that looks like a triangle pointing downward. This arrow will point to the factory lift point on the vehicle. The lift point will look like a metal tab, oftentimes with a notch on each end of the lip to reduce slippage off the jack. Another keynote, don't try using a bottle jack to lift a car. The jack will be too tall to fit unless you're on ramps or there's an excessive amount of clearance between the bottom of the vehicle and the ground. These jacks are best used on trucks/SUVs due to their higher ground clearance. Very well put together video sir. Definitely good for anyone not familiar with equipment like this and making entry into the maintenance field.

Have tried similar screw extractors few times now, no Luck , just make a bigger hole in screws 😲

Great informative video! I really appreciate To The Point videos!!! We use multiple portable a/c’s in our TX apt to assist the ancient central a/c unit…since the portable allow the central a/c to run less…it has lowered our electricity bill a great deal!!! I understand some portable a/c’s need draining and others are bucket-less or self evaporating. As well as some are in between & partially self evaporate as it uses the liquid to cool the mechanism. I’m looking for a video that shows a comparison of these 3 types & what it looks like internally!!?!?

Thank you for this information, it was used to install fuel lines in an aircraft! The world needs teachers like you!

Thank you! Super helpful. Great pacing

How thick was the steel diamond plate?

Do I need to add freon for the LG portable AC after using it for a while?

People have been saying drop the pressure to the lowest setting that gets a nice pattern. Does that mean going into the Roller settings? Or do I start from the (start) position and into the "Spray" section of pressure? I assumed the "spray" section, but i seem to have tails when spraying. Id also get little bubbles which is no-good.

This is better then watching ppl mow lawns

You want to place the wood against the fence farthest from you, not like you see here. You don't want the pushing force of the saw against those little plastic pins, you want the fence to carry that load. Plus it'll help reduce "tear out" if the work piece is supported by the fence.

Is 20ton bottle jack for a approximately 1ton car, overkill? _nope._

How are you not so incredibly popular?? This video was literally top-class! I can’t believe this! Keep up the good work man!

Cheers. A great video. Well explained. I didn't know I could crimp with this! Thanks again bro👍🏼👍🏼

I just bought a Wagner paint sprayer at a pawn shop, very affordable and with a guarantee! Anyway, it did not come with instructions, so I found this tutorial. Hey, this is the best tutorial yet that I’ve watched. I’m confident now. Thanks so much, you’re a natural born teacher.

Thanks for the vid, question will the string be damaged by hitting around a fence post?

expansion valve

We definitely have to resort to a better energy saving resource...bills are extremely high,fans are doing their best. What's your views on solar on a small island and what do you think the risk health wise,long term?

Blessings to everyone. Here in The Bahamas is super hot.

How do I stop mine from leaking on the floor?

WOW. You are the most excellent teacher. No nonsense, great editing. Now do videos on everything else so I can understand the world. This was awesome. I was expecting long winded "Now, back in my day..." or "here at Such 'N' Such Company, we..." nonsense and got this instead. Thanks!

You didn't mention anything about a rivet's grip range, the thickness of the panels being riveted together versus the rivet's length.

On my very first gun, first time taking it apart I stripped a screw BAD and I of course being my first got frustrated and made it worse, thank god for these kits… was able to replace the screw even though it was really small. Lucky that it was semi soft steel.

Can a sheet sander be used as a polisher?

Excellent!!! 100 % 👍

Thank you Sir