- 20
- 23 350
RichLivesLife
United States
Registrace 13. 08. 2019
Rich Lives Life
Chevrolet Silverado Fuel Pump Installation
This is a short video on fuel pump and filter install on a 2000 Chevy Silverado with a 5.3 V8
zhlédnutí: 346
Video
7" Reverse Camera Installation Suzuki Jimny Samurai Sierra
zhlédnutí 193Před 7 měsíci
This is a do it yourself with what you've got installation on my 1990 Suzuki Jimny. Below is a link to the backup camera and 12 volt lighter receptacle that i purchased from Amazon. Camera: www.amazon.com/dp/B0BKSPFM7Y?ref=ppx_yo2ov_dt_b_product_details&th=1 12 Volt Socket: www.amazon.com/dp/B08NCB387L?psc=1&ref=ppx_yo2ov_dt_b_product_details
This Air Filter Replacement Did Not Go As Planned
zhlédnutí 250Před 7 měsíci
Air filter replacement on a 1990 Suzuki Jimny JA11. This is an alternative to ordering factory filters from EBAY or Japan. I tried the short and long Suzuki Carry Filters and they did not fit the same as the factory Jimny filter. You can also hear the blow off valve now if you like that sort of thing. Amazon Filter Link: www.amazon.com/dp/B07DRZQVBR?ref=ppx_yo2ov_dt_b_product_details&th=1
Suzuki Jimny Samurai Seat Replacement
zhlédnutí 1,7KPřed 7 měsíci
This video shows how I installed Honda CRV seats in my 1990 Suzuki Jimny JA11
Energy Suspension Shackle & Leaf Spring Bushings Suzuki Samurai Jimny
zhlédnutí 750Před 8 měsíci
This is a short video on my install of shackle and leaf spring bushings on a 1990 Suzuki Jimny. I am not a certified mechanic and my videos are for entertainment purposes only.
How To Replace U-Joints Universal Joints
zhlédnutí 99Před 9 měsíci
This is a short video on my technique used to replace u-joints on a 1990 Suzuki JA-11 Jimny Samurai. 4x4
Hurricane Idalia Smoked Chicken
zhlédnutí 22Před 10 měsíci
I'm on the gulf coast of Florida and prepping for Hurricane Idalia so why not smoke chicken so I can have food during the storm.
Amazing Used Wheel and Tire Restoration
zhlédnutí 108Před 10 měsíci
Market Place Score. Used Tire and Wheel Restoration and Install on a Suzuki Jimny. Another viewer stated that I may have 2" lift springs and a shackle lift. I can't confirm the leaf lift but looking at other Jimnys it appears factory leaf's are nearly flat and these have some arch to them.
Suzuki Jimny Oil Change US Filter
zhlédnutí 443Před 10 měsíci
In this short video I'm just discussing the filter interchange and how the car lot in Japan lied about mileage. 1990 Suzuki Jimny JA11. I'm not a huge fan of synthetic oil, but ended up having to go with a synthetic blend due to no-one having conventional 10w40 oil in stock in my area. Capacity ended up being a little over 3 quarts.
Suzuki Jimny / Samurai Truck Shock Installation Part 2
zhlédnutí 232Před 10 měsíci
Suzuki Jimny / Samurai Truck Shock Installation Part 2. Another viewer stated that I may have 2" lift springs and a shackle lift. I can't confirm the leaf lift but looking at other Jimnys it appears factory leaf's are nearly flat and these have some arch to them.
Suzuki Jimny / Samurai Truck Shock Installation Part 1
zhlédnutí 135Před rokem
Suzuki Jimny / Samurai Truck Shock Installation Part 1 Partial Fail. Another viewer stated that I may have 2" lift springs and a shackle lift. I can't confirm the leaf lift but looking at other Jimnys it appears factory leaf's are nearly flat and these have some arch to them.
Ram 2500 Cummins Rear Sway Bar Links
zhlédnutí 955Před rokem
In this video I show the simple process of replacing the rear sway bar links on a 2018 Ram 2500.
Starlink Open Box & Install on 2022 Forest River Heritage Glen Elite 34RL RV
zhlédnutí 42Před rokem
Elon Musk SpaceX Starlink. We have been having trouble working from the RV so we ordered Starlink. In this video we show the opening and installation of the Starlink system. Tesla
Fox Body Mustang 5.0 Walbro Fuel Pump Replacement Without Dropping Tank.
zhlédnutí 2,2KPřed 4 lety
Fox Body Mustang 5.0 Walbro Fuel Pump Replacement Without Dropping Tank.
Top Child Care Watermelon Adult Beverage Preparation 2020
zhlédnutí 77Před 4 lety
Top Child Care Watermelon Adult Beverage Preparation 2020
Blue Heeler Bath Blow Dry Rescue Dog Care
zhlédnutí 108Před 4 lety
Blue Heeler Bath Blow Dry Rescue Dog Care
Redline Asset 24 Freestyle BMX Build Review Part 1
zhlédnutí 2,6KPřed 4 lety
Redline Asset 24 Freestyle BMX Build Review Part 1
How To Install The ECCPP Diesel Exhaust Tip
zhlédnutí 13KPřed 4 lety
How To Install The ECCPP Diesel Exhaust Tip
Top Holiday How To Tackle A Christmas Tree
zhlédnutí 183Před 4 lety
Top Holiday How To Tackle A Christmas Tree
Did the oil filter work
She's a beauty ❤️.... very little corrosion on the inside .... amazing...take good care of her . I see its a right hand drive Japanese import . Whats the engine ? 660 cc turbo ? And whats your tyre size ? I love the fender flares ...where did you get them ?
Nice looking Siverado, but in the rust belt this can be a can of worms. My 97 Ford Ranger still i decent shape but pulling the bed would also require financially prohibitive upgrades so with a tape measure and some dead reckoned eyeballing I cut out an access panel and pop riveted some small angle to make a 8"x10" panel. This is my third pump and the las two replacements took the better part of 30 minutes. Granted its not a show vehicle but after 357,000 miles i found a few short cuts. Your vehicle looks great but Ford just makes it difficult for harsh winter vehicle repairs.
Nice job, I did the same with mine several years ago lifted off the box, now I am faced with changing the brakelines I wish I had done the one to the rear when I had the box off I did it myself too using a come along, I change my fuel filter frequently I never undo the bracket
You have 4 friends :) haha
👍👍
The best way are front and rear seats from Renault Scenic I gen .
We don't have those here, but I looked them up, and the seats are nice. I only paid 140 u.s. for these as this is mainly a budget build.
Another BIG tip: if you ever decide to get access to your spark plugs, YOU MUST remove the intercooler first. It is only three bolts, so it's very easy to do. If you don't, there's a very real chance that spark plug number 2 will be cross threaded when attempting to replace because there is NOT a 100% clean straight shot at the plug hole due to the intercooler getting in the way, but it appears good enough to try without removing first. It's very deceptive with possible catastrophic consequences. I know because that's how mine was when I bought it. I attempted to remove plug 2, but could not; it would only turn 1/4 rotation back and forth at most. Luckily a mechanic managed to get it out, but it could have gone a very bad way if I was unlucky.
This is my advice from experience of owning a JA11. I'd recommend leaving the rear quarter panel covers off. Part of the reason why rust accumulates in corner seals over the rear wheels is because humidity/condensation gets trapped behind the covers, and drips down into the corner seals, and starts rusting it. Water also makes its way behind the covers from dripping down from the windows right above since the windows aren't sealed permanently. That's why rust is forming from the inside, out. With the covers off, it'll give it a better chance for any water to evaporate off. In addition, any water will be plainly visible to be easily cleaned up since it won't be hiding behind the covers. Another rust spot that ALL Jimnys have is the very edge of the floor, right up against the rear door as seen at 1:31, but yours doesn't look too bad tbh.
"This is fine.... this is fine.... there we go.... this is fine.... " :) hahaha :) LOVE IT!
The seats are 2000 Honda CRV seats.
Wow
Need more online garbage content please :)
I’m on it.
Welcome back!
That poor car. You used more energy hacking it then emptying tank and lowering it.
Love to see it...
quick question .. and thought id ask a professional .. so there’s this truck around my area that goes down my street near my house and the speed limit on that road is like 35 which the road is about 30 feet from me not to far .. so when he passes by LITERALLY SHAKES the house how ?! what could he have ? the truck sounds crazy loud even with him going 35 mph .. what could he have you think ?
Sorry for the super late response. He most likely has no muffler or catalytic converter which is just open exhaust. Some free flow mufflers can be loud but if it's loud at low speed he likely has no muffler at all.
Homie must be in 4 low🤣
That just drop the value of the car
I appreciate the feedback but we don't plan on selling it. For us it's just a material object that's fun to drive. We have too many performance and aftermarket items on it for it to matter anyways. Runs good ,air works, and does great smokey burnouts.
WOW!! Why would anybody cut their car? It is two bolts and a couple screws to drop that tank. Ridiculous.
Tank was full and I live in a neighborhood that doesn't allow you to work on vehicles. This was quick and easy, and it's not like I cut a hole in the outside of the car.
Why wouldn't u show the sound before and after
It doesn’t sound any different. It’s just aesthetics to get rid of the plain factory look.
Well that summertime edition is officially fucked!
I appreciate the feedback but we don't mind cutting on our cars. For us it's just a material object that's fun to drive. We have too many performance and aftermarket items on it for it to matter that it's a feature car. Runs good ,air works, and does great smokey burnouts. We will be cutting on a JCW Mini Cooper in a few months with a new lift kit and rally setup.
I've always had great packaging with my Skyway wheels. Never a problem. Where did you get them from?
LOL I been building the same thing!
Sweet. I will be posting the build in a few days. Life got in the way and I never uploaded the finished build. We may raffle it off. It's sitting in our climate controlled storage and only rode it 3 times.
it looks nice how much it cost you
Amazon link in the description, amzn.to/31U4Djo . I just checked and its's currently $30.89
why .....
Why not? Tank was full and heavy. Plus guys like to cut holes in things.
less talking more finishing
LOL haha
I will be posting the build in a few days. Life got in the way and I never uploaded the finished build. We may raffle it off. It's sitting in our climate controlled storage and only rode it 3 times.
How much does that Redline weight stock? They don't list the weight anywhere!
I got redline,mx24in.2008. Green.chromoly frame etc.
Looking to do the same thing brotha! Please finish this build&drop a video ASAP, interested in seeing the end result✊🏽
I will be posting the build in a few days. Life got in the way and I never uploaded the finished build. We may raffle it off. It's sitting in our climate controlled storage and only rode it 3 times. I ended up putting a little over $1,000 in the build.
Now we need Part 2. I'm looking to get an Asset 24. I have my '85 RL-20 Prostyler up in the attic, but at 50 I'm not going to ride her.
Sorry about the delay. I'll throw a short video up over the weekend. I ride all over our neighborhood and get nothing but compliments on the bike.
I have the 2018 model. I changed the bars to redline flight bars 8.5”. I’m 46 years old, 5’11”, 190lbs. Lol
Great job Rich 👍🏼
Thanks 👍
Made me thirsty
It tasted terrible, lol.
Where is the cutting board!?!!?!? :)
It's an 11' long one made of quartz.
Use a little 200 grit sandpaper on those rims, good as new :) Look forward to having fun together! :)
Looks Great Rich