Video

@@hughobrien1234 this one just works so well. Very impressive.

@@WR77TM thanks! Hopefully it’ll be good when it’s done!

It is a lot of fun I must say. Have a review coming soon, just have to finish a couple of other projects first, so keep an eye out for that!

@@bigbuna that is definitely a good looking 2011!

@@derekhe148 so this is the kwa gbb version, not the tm. But I got the tm case, silencer and lam pod to complete the look :)

That’s very unusual, no I haven’t had that issue. I think my first thing would be try to give it a good clean and lube with a light oil to see if that solves the issue, otherwise it might be worth removing the burst mechanism to make sure something isn’t worn out (which I would be very surprised if it was)

I don’t think I can on here for CZcams’s selling policies which have changed recently, but if you look up the ‘action airsoft’ website, then search fmg, it’ll come up 👍

@@hughobrien1234 yes it seems to be a very common issue! A few others have come forward with the same problems. It’s not a terrible job, and it all comes apart reasonably easily, so can be fixed quite quickly :) It just a shame that such a new release is so badly designed, and they’re not cheap either!

@@Gasblowbackairsoftt I GOT THE PARTS AND DID THE FIX, IT WORKED, THANK YOU!

@@WR77TM polishing the contact surfaces between the hammer and sear contact will definitely make it lighter on single action, however if you’re firing from the decocked position it will still be the same weight as you’re working against the hammer spring.

@@KOMA6166 thanks for confirming, I was a little unsure! Yes I agree that the AA versions of these are most likely the better bet, my XL definitely runs a lot smoother than this one, and as you mentioned, the proprietary parts are very annoying 👍

@@Gasblowbackairsoftt Not a problem! I actually live just a few hours away from the Staccato factory! I had an older version of the AA C2 with all the trades removed from way before these newer versions came out and loved it. It even had the correct grip length. The C2 is meant to be a G19 type compact pistol. The Savia OEM pistols only give you the full size grip. I ordered one of the new C2s as well and both come in this weekend! I'll let you know how they are and if AA still kept the shorter grip on these newer models

@@KOMA6166 oh wow! Yes that would be amazing, please keep me updated. I’m really hoping someone brings out a cs too, I’ve seen the nova kits and they looked great

@@Gasblowbackairsoftt yeah I've seen one of the kits for the cs on jk army! I'm curious though if they've actually changed the dimensions of the grip as well, to more accurately represent the real counterpart. That would mean a whole new set of magazines though. The real cs and the new updated c model have a smaller grip in both width and from front to back since they made a dedicated 9mm magazine. The magazines from the older models were actually made for the 38 super and 45 ACP cartridges and then adapted to accommodate 9mm.

@@KOMA6166 ah! Good point. I suspect they’ve kept ‘hi capa’ specs, but it would be interesting to see what they’ve done. I’m very tempted by the kit though, it’s just a lot of money for something that will sit on the shelf! Very interested to see the proprietary parts though.

No this is a build I bought of someone else, it’s a Tokyo marui g18c fitted with a prowin aluminium slide :)

@@Gasblowbackairsoftt Looks dayum clean

So you can't get one

@@Q-ey2jk this one is stock Tokyo marui g18c but it has a discontinued prowin slide kit fitted.

@@hughobrien1234 this is very true, and completely valid if you’re just wanting something out of the box 👍 I would recommend a vfc over a tm every time if the person in question wants a metal slide pistol. I do have a bomber steel slide vfc glock 19x in my collection, along with a steel slide fnx45, however I do find the vfc stuff to be very hit and miss with build quality their glock alloy slides seem to be very weak on certain models (also see my video on the vfc fns9). Also steel slides for vfc models are very expensive when compared to the guarder stuff for Tokyo marui. I also honestly really enjoy the build, plus with tm’s very good gas efficiency they respond very well to these upgrades usually. But mainly, it’s the build I enjoy. taking something, and making it better 😉

@@ryzwind2209 thank you, I’m glad you’re enjoying the series so far :)

@@Gasblowbackairsoftt Man trust me you were one of the best youtube recomendations I got lately :D

@@ryzwind2209 that’s very kind, thank you.

@@KeiyaC thanks, that’s good to know, I did suspect you probably could just get away with replacing that unusual sear, but the hammer felt cheap so I thought I’d replace both. Great to hear you got yours fixed for cheaper 👍

@@ryzwind2209 thanks 🙏 It’s definitely an expensive hobby if you do builds like I do

@@morriszachrisson8359 it is custom built short barrel. You can buy the base revolver, however it will have a long barrel.

@@Gasblowbackairsoftt I know it is custom built. I am asking about who has made it and how to contact that person.

@@morriszachrisson8359that would be me :) I modified the original front end cutting it down and using a milling vice on my pillar drill, it was a very time consuming process, but worth it. I’ve heard that there is a 3D printed version available on thingyverse. Never tried it though!

@@Gasblowbackairsoftt Thank you for the answer. How did you remove that F-pentagon and the word "Airsoft" or "4,5 mm" from the left side of the frame under the cylinder?

@@morriszachrisson8359 I didn’t, it’s still there for legal reasons, I think it just isn’t shown well on the video 👍

@@adamhunter5026 thanks! Yes it’s a aps shell ejector :)

Thanks man, yeah I’ve always been like if you can’t find the right tool, make it! 😝

Thank you! Cheers!

Thank you!

The base pistol can be bought through most retailers here in the uk under the umarex brand, however I believe it’s sold as the ‘premium’ steel slide version. Non uk, I know you can buy it directly from samoon (ghk)

Thanks! Yeah I think I’ve just secured a sale on it. Need to shift it to go towards other builds unfortunately!

Thanks for the feedback! Glad you liked the review. I actually got this ‘second hand’ however I suspect it’s had almost no use. Airsoft direct uk have them on pre order currently, so that would be a good way to locate one if you don’t want to order from abroad.

@@Gasblowbackairsoftt yeah the only issue with it is they never seem to come back in stock, when I called to ask them, they said it was a preorder not a back order so they couldn’t promise a delivery date. I found a secondhand one in a similar state to yours so have that and a new sear on the way. Cheers for the reply

@@sufyanm4661 ah glad you found one! Yes hammer and sear will fix the issue! Best of luck with the instal!

Personally I would, but that’s because I would always intend to upgrade it to a metal slide and barrel which is usually far higher quality than the umarex models come with stock. However if you don’t want to mess with it, then I would ask you if it having a plastic slide would bother you, if yes, then get the umarex, but if not and you want a efficient little sidearm, then 100% go for the TM.

Oh damn, they really don’t seem very well made I must say, I think I’ll be changing mine for an army armament version at some point I think!

Hey man. Thank you for posting this. I bought mine, and it's like the hammer never latches all the way and follows the slide home to only shoot full auto. Will be trying this fix.

@@LiamStJohn-uh6np no problem at all! Glad this can be of some help! I’ve just been doing some more work on it this evening and it’s still working perfectly. So I definitely recommend that hammer and sear combo. Yes I believe the extra weight or mass of the sear was stopping it from travelling forward and latching the hammer, it’s likely just the sear would fix it, but I was keen to replace the cheap looking hammer!

I hope so too mate, I absolutely loved mine, it’s a real shame :(

Yes I suspected I was doing something wrong, and until that point I hadn’t had a lot of time messing with it, but yes how you explained it makes total sense! Good shout, I think that would work, next time I’ve got it apart I’ll have a good look and see if it’s a possibility, nice explanation, I’ve got a pretty clear idea of what you mean! Thanks for the feedback, glad you liked the video!

This is actually a golden eagle gbbr wearing a mk12 front end with a few ghk parts for good measure :)

@@Gasblowbackairsofttdamn, well the mod 0 hand guard is definitely a good choice.

@@louissinon6868 yes it’s by no mean lightweight, but it’s definitely a good looking rifle!

⁠@@GasblowbackairsofttYh my double bell has a steel handguard shit is heavy, but weirdly comfortable to use.

A steel handguard? Wow, the one on this one is aluminium, and it’s heavy enough! I’d hate to carry around one with a steel handguard! 😂

They’re no longer available with the steel slide unfortunately, the vfc is currently available with the alloy slide however.

If you’re a 1911 fan, you won’t be disappointed. It runs great!

Have ordered one. Will be my first TM gun. Wish it was in metal. 😅

Yeah it’s a shame, but they do run great with the lightweight polymer slide and barrel if you intend on skirmishing it!

Thanks for your input! I’ll definitely consider one :)

Who knows, it could happen one day 😂

@@Gasblowbackairsoftt I'll keep my fingers crossed 🤣

He can you sell me a Glock 26 steel slide

@@user-gi1co6ul5f I’m sorry, but I don’t sell any of my builds, nor would I be able to on this platform. Guarder do steel slides for the airsoft g26 platform, so the best option would be to purchase the parts and employ a tech to build you one :)

😂 I’d say 50% -10 😂

I got her from one of the many discord groups :)

Yes mate, they’re a weird but cool thing

@@Gasblowbackairsoftt absolutely need one haha

Great to have you along! Thanks for the feedback, this is the mk1 mcmr. So its technically v2/2.5

@@Gasblowbackairsoftt ok tysm

@@Gasblowbackairsoftt All BCMs are gen3

@@oranda2000 apparently the original ones (like this one) are technically a kind of ‘v2.5’, based on v2 with some v3 improvements before v3 came out, so I’ve been informed.

@@Gasblowbackairsoftt Nah, the silver one piece valve knocker means a gen3. The very first gen3 VFC AR15 was the Mk1 BCM MCMR.

They are an interesting alternative to the usual smg’s that’s for sure 👍

Thanks man :)

Yeah it’s definitely one of the more unusual items in my collection 😂

You do mate! Action airsoft have them at pretty reasonable prices currently!

It’s got a vfc g18 internally, and shoots great! I have the dbal fitted so you can use the laser as a sighting aid