Video

so could i install a short ram and have both hot air and cold air flow??😗😗

I’m glad I’m not alone, the antitheft going off is the cherry on top of insanity

Is that kit the same size as the size of the bolt? I got the same size for mine but it looks the bolt is not tight on the inserts when I just test it.

What ever happend to the GSF?

best to get a lvlp gun for small tanks

Can this parts fit on a 2012 Honda civic exl?

I was stopped at signal and I couldn't start Engine at all. I just bought it and it just happened to me volkswagen jetta 2019.

Please put this engine in a older honda chassis. It's only been done in Brazil

soo, do you have play on the arp rod bolts of the kingtech racing con rods

got any plans for trans swap or still keeping it auto?

Thank you Top Man! Did exactly what you said and found 2 bits of metal in chamber,now back on road and happy. Top 3 hardest tasks was from hardest 1: 2 bolts holding ignition switch 2: side hole on the switch 3 : removing the key barrel ( 2x as misaligned the antena slot 😬) P.S if someone struggling with ignition lock and can't turn your key to on position, I used big flat screwdriver to break loose the ignition lock default position then put key and aligned used wife's hair pin to get it off (DO NOT USE THIN WIRES ) One broke off had 15 min extra work to get that out as I was lucky to leave some wire at eng to grab on.. Anyway good luck guys

Just bought a 2nd engine to build and boost it, been studying your videos like crazy. Don’t stop 🙏🏼

If you’re asking, what’s on my face …I’m actually recovering from a dog bite 🐕🐶

Awesome video. I did all that and switched the ignition cylinder to the new one. Quick question, I sent the ECU to a repair place. Since the VIN is attached to the ECU still and the key is with the ignition cylinder, shouldn't I be able to reinstall the rebuilt original ECU and start the car without reprogramming? Thank you for your help!!

5w40 liquimoly in my fbo e85 a3 quattro

I just bought this off TikTok. I’m guessing it’s a more updated version. The DC Plug has a USB port on it so that’s pretty convenient. It definitely brought my 2000 GMC into the modern era. And I paid 80 bucks for it.

Two per packet right? Trying to see if i have to buy another box of spacers🙏🏼

So many haters.

The slots is in fact supposed to cut into the pads. Powerstop is the only brand Im aware up that is not supposed to cut into the pad but instead the slots go with the pad

🤔 If I take a skunk2 stage 2 cam and have a shop make me a cam with the same specs but swap the low and high profile lobes around, would I be able to use it as proper vtec at that point? Technically I'll be on the low profile lobes at all times if I do this yes? And I can raise when vtec engages with hondata and actually give the vtec purpose no?

Question I have 2014 civic would that turbo fit in my car ?

All I run is Rotella t6 5-40 bro and run 30-34psi on a 4849g (g25-550) and ha been dogging it for about 3 years now as a daily, and I built it myself 😅... amazed it's still alive tbh (knock on wood lol).. but na I over built it so I can beat tf outta it .. but yeah bro Rotella is were its at imo , now I have heard different stuff from different people on it , but in my personal experience it is the beez kneez with a boosted build cuz all the turbo and diesel engine additives in it help a ton with the longevity of the engine and turbo.. but it's really all opinions without lab results 😅.. anyways peace and love bro keep it rad stay safe and build on..l8z famz and keep having fun brotha

I’m interested to see your oil analysis says from BITOG.. the additive packages in the rotella are very different from what’s recommended for German/Japanese cars.

wow ! Rotella oil looks bright like honey 🍯 compared to other oils fresh in the market ! This was probably the first time actually watching being poured out from the 5g jug . 10w30 looks pretty thick but I’m guessing because of weather conditions near your stay it’ll definitely benefit the life safety of the turbo & engine . As for where I stay & how hot 🥵 it still is & humid , I’ll continue running 5w-20 but I do also pour in other additives behind my oil change to help run my engine smooth & quite

I put diesel oil in my 400,000 mi Camaro , that's the only way it will build any oil pressure 😂😂

lol putting diesel oil in a gas/petrol engine...good luck with the oil starvation in your bearings especially on your crank the oil is too thick for tolerences in a petrol engine..

I use Ravenol 10W30 Its OEM approved. Interesting I see your car didn't come with an anti roll bar.

Moncef with AdminTuning recommends the Shell Rotella 5W-40 when running his tunes on the Nissan VQ engine platform. I'm still stock, so I'm currently running Motul 5W-30 (OEM weight). Only other oil I've used in my G37x is Royal Purple. Looking forward to your results; I've been super curious about running diesel oil in a gasoline engine.

Почему у тебя гидроусилитель а не электро ?

Waiting on that e85 cold start video explanation

I use valvoline 5w 30 full synthetic in my 2007 civic type r fn2

Goodluck. careful, bearing tolerances and oil weight is important. OEM bearing tolerances use OEM weight oil

2018 corolla and they still putting hub caps 😂

What oil and oil weight do you use?

I love some hard cold start cranking lol

so...fill the pan with metal shavings...then make Loctite stick to an oily surface....You must be a master mechanic

There is no real ratio.......Different needle sizes and air pressure results in different thinning.

Sorry all you babies. If a Mexican talks paint. I listen eat it guey

Hey I have a question since you really know about the 8th gens . Would it be possible to fit 2014 accord sport rims on a 8th gen civic sedan lx?

better to buy a new oil pan insted of buy the tap kit

Exccellent explanation

I’m surprised the crank bolt didn’t snap off in the crank 😂 you can tell if the cylinders are even somewhat. The only thing really going to be able to be done to confirm anything without a starter on the engine is a leak down test. Compression specs are based off of the engine turning at a certain revolution which is the speed of the starter.

Bro can you do an assembly and install video. I finally got an engine knock. Ready to upgrade to these before I boost 🙏🏾

Great and Concise video!! Very informative. Discovered that the oil plug is stripped on my new to me 93 Dodge van. I’m sure it was done by one of those quick oil change places. I won’t go near them.

Paused halfway - I don't see the clear wrinkling (blisteing) at all! I bought some color change out the spray bomb from Walmart. Last night, I cut my trunk jam in... Went to look this morning and it looks crazy good! Looking straight on it's a heavy metallic blue. Look down across and it turns into a deep purple. Only thing is it's super super thin and you have to fog it on basically.... It's wild because being so thin one pass looks covered! You have to use a black base... My base isn't even paint. It's flat black primer! I'm going to let the aerosol out the cans and punch a hole in it and pour into the spray gun... I'll let it dry completely. Scuff the car with a scotch bright pad and use a universal clear... Because being I have to fog it on, it's not having a shine. It dries super fast and it's been 90-100⁰ this week so you can imagine... But I'm going outside now to tape off everything so I can do a test run on the trunk lid...... But I could not believe how much of a shift it does for it being a spray can paint from Walmart! 6 cans should complete it so that's about $70 and then I think the clear kit is $150 PPG Acme

How long did the rebuild take?

The best video I had ever watched so easy to do the Joe after watching this video thank you so much!!!!!

@2:25 the instructions show you mounted them incorrect per illustration.