Video

Thanks for this video...went on to amazon, but couldn't find the pump.. What exactly should I be looking for. Thanks

I’m a little late to the party here. Most of us don’t have another dummy cell to put in line to do your bucket test. Rather than doing this, a buddy of mine said you can do a jet test. What that is it’s just capture some of the water coming out of the jet after it’s gone through the cell and test for chlorine. This will tell you if your cell is generating chlorine. I tried it and it works great. In case the phosphate level was fine, but nitrates were off the chart.

I'm in the Atlanta area... I installed solar several years ago, an yes, nighttime cooling can work. Anytime you are using "solar" you are also at the mercy of the sun, clouds, and outside temps. In July and August, the water can get warmer than we want simply from sun shine and high ambient temps. During those conditions, I change my pump programming to run less during the day and more at night and allow the panels to pull some of the heat out of the pool, knowing that it should heat up again the next day. To be most effective, you do need to adjust pump run times to match the season and weather conditions. In our case, the solar has added nearly two months of extra pool usage per season.

Could you in theory fill it with trichlor to use on black algae spots?

What’s the second product you used? Thank you

These lights are hard to source. Any recommendations?

They suck on warranty I bought mine and right out of the box it wasn’t working and I couldn’t get a replacement I had to go through the warranty and they don’t fix it or test them before they sent they back to you

Hi, i just poured Algae killer and Clorine and they're floating. Where to go from here?

Very very poor video does not tell you a single thing that it claims - "Salt Cell - No Power" Diagnose & Fix.

How much do you charge for changing out a pool timer?

That thing is so expensive but can you use this on a vinyl inground pool

How does this work at the timer? With it being variable speed obviously the timer isn't needed anymore, but with the salt system being installed you'll need the timer to be able to shut it off when the pump isn't running. That's why I watched this video, was hoping to find an answer if you could help :)

Hello, what if there is no “flow” light at all, but everything else is green? Is that normal ?

I did this method because I happen to still have my old cell so I used it as dummy but when I turned chlorinator on withacting cell in bucket of pool water, the display would only read “hot” then “cold” and generating light would only flash. I would appreciate any reply you may have.

With the equipment in the video not having a heater and the element was removed from the filter I'll say that's good but I did notice the salt cell and all that cal-hypo going through it I'm sure shortened the life of the cell maybe even had scaling after a while. Pool shock directly in the skimmer as I've been taught for 10 years is a big no no. Only cya in the skimmer with the basket present when adding. Not saying it won't work but in the long run not a good practice imo.

The demonstration of plugging in the new one with it in the cardboard is gold.

can i put pump and heater? so this way i ensure the heater can only be turned on when the pump is on. i have everything manual except the daily on and off of the pump

What kind of warranty do these lights come with?

I always wondered. I think I pulled mine too tight.

Hey man, thank you for the video. I’m interested in getting my licenses anyway you could help me out?

Or you know the conduit is the ground. It might not be as common but it would still be up to code.

What is brand of the diverted used to adjust air flow to spa. Thanks

hey so its been almost 1 year since I started servicing pools, however, what actual experience do I need for a c53 license? Assuming I don't have bachelors to cut down the time? I just need to know if I need to actually have experience in building pools. Can I just use the experience for servicing pools?

I teated my salt cell t15 and it works. I have no free chlorine this year. I keep adding stabilizer and nothing seems to wprk for my water to hold chlorine more than 3 days. Is my mother board on my hateard aquarite bad? I only see power light on. I flip to super chlorinate and no light. I hit diagnostic button amd only number i see is temp and volts. All other number are 0. Screen numbers do move. Any help?

That salt came from us at SCP 👀 😊 I know splash isn’t the best quality, it seems to have a lot of trash in it and clumps up constantly.. But it gets the job done! We have two truck loads of aqua salt in the yard at the moment and one truck load of splash, first in first out, sorry service guys!

Hello and thanks for the informative video! I’m doing 50 pools and currently using the hammerhead 90% of the time and system vac the rest. The operation of dismounting the HH vac, switching it on, re-mounting and rolling up the cord is really seamless and simple. Is the riptide similar in this way? It looks like it could be kind of awkward but can’t find videos for reference. I’m seriously considering a riptide thanks for any help or insight 🙌🏻🤙🏻

Thank you

No more wraps on the trucks ?

Luckily my brother has a book keeping business 🙏🏻 the s corp is something to keep in mind might have to do that once start mine..

Under a minute lol Now this is definitely a good strategy for people to click. In all honesty it looks like it took between ten and fifteen which is still pretty fast! Good stuff 🎉

I just add it to the deep end and brush it out. But use your just put one bag in so yeah it don’t matter 😅

I prefer Aqua Salt brand. Cost a tiny bit more but never had any discoloration that can happen with other brands after time. Just my personal expireience. Edit: The bags don't tear either.

Very helpful video. Thank you

Thank you for this video!!!

Im thinking it's another condo

If I came to Florida for a month could you provide me a little work ive got a cousin that bought something there again he's going to need help setting it up

I know you don't have the problem with vinyl liners there

what? Cant hear you over the pump!

Helpful thanks. I found this video because my problem is I just installed a brand new S180T sand filter and multivalve top (replaced an old one of the exact same set up). All is perfect, except my brand new multiport valve is leaking from the very top / handle!!?? Any thoughts on what could possibly be wrong with a brand new, sealed product in box?

Are you coming across with the swimming pool with the ancient dream cover?

Might be a dumb question, but if you have enough slack at the junction box, couldn't you just swap the light itself and not have to pull all of the cable the whole way? Or is this done to ensure the electrical taped area comes out and you only have the uncut cord in the conduit?

A sparky didn't put that in. That was a home owner who is/was an engineer

It’s called integrity

For a pool man talking about pools you can’t beat it 😂😂😂. Ima let all my guys at our pool group hear this. At first I thought this was a black man rapping

Your music quite good, nice work

Hi Eric I went out to check a jandy salt system today said 80 percent standby any causes for that I reset it and it seems to be working the cell started bubbling so I assume it was making chlorine I don't know a lot about jandy I'ma Hayward fan forced to work with pentair

Does anyone work in the rain or am I the only one? Lol Curious if you do, maybe you could talk a little about what you think the best gear to wear is to keep you dry. Tia

🎉

Good advice

I like that you tell it like it is no bs you can call a product out and not get in trouble