Video

Summer is over here in Denmark, and we can start again with making guideline videos for Bang & Olufsen products. This time, we have the Beoplay M3 on the table.

Hello Kose, your instructions are very detailed, great video! Not sure if you could help me. My beosound 9000 is stuck at cd 6, doesn't go back to cd 1. when powered on, it will try to move away from cd 6 but fails. Any suggestion what might be causing this? thank you.

Thank you so much for the video!

Very nice but much easier to simply remove the whole front panel with the speakers, then you have a direct access to the whole damping design, the bottom part included. It's also easier to clean :-)

Necesito ayuda . Yo tengo el mismo y no se como usarlo . Gracias soy luis desde uruguay

I need Main Board, will sell my speaker

Mmmmmmmm

The blue PCB looks like the cheapest tablet made in China

The 4 inch bass driver seems to be the exact same one as the older Beoplay P6, just with a slight change to the aluminium cone, I wonder how this one sounds like compared to the portable Beoplay P6 👍 Thanks for making this video

Or just get a external power bank for $40 plugged into USBC port for 10+ continuous days of playing!!

Honestly you’ve got the manual dexterity of a tranquillised bull elephant! You really ought to title your videos “how not to”…. The flex printed control ribbon wires that plug into the top of the LED display are very easily damaged so you hang the entire top panel on these! Next, you didn’t even unplug the CD mech plugs before removing the mech assembly, your videos are anything BUT instructional… presumably the repair element is the next poor sod who has to fix your mess!! Jeez what a bloody mess!

Wow, that looks beautiful

Wow, that looks so cool

U can buy x2 JBL Go4 for 60€, pair them with auracast and have a better user experience

Bạn có thể làm video..tháo A2 ACTIVE được không

Great Tutorial. Do you have any advice on an issue I'm having where one of my speakers is no longer playing sound and stuck in 'red light' mode? I debugged enough to confirm it's not the wiring since the same cable works fine on my other speaker. Tried toggling between R/L/Line and nothing changes. I can't fully tell from other forums but it seems like it may be an amplifier issue, hence I'm debating opening this thing up.

Have one - as you said, so far ahead of it’s time. Awesome to see it disassembled.

will this loudspeaker play only the center channel or can it play stereo signals in stereo? Or does it need to be modded to play stereo?

Why this company won't repair their crappy speakers !!!

2200mah

Tell me battery mah please

My covers where so stretched over the years, removed them and I bought some new ones from B&O. But between removing the grill and delivery of the new grill, i found they were sounding a lot better without grill, so I never put the new ones on and left them in their original tube packing. I know they are looking a bit weird now, but they are sounding so much better, the high notes are clearly liberated. Good video.

I love how this guy manhandles this device and practically destroys it.

Do you know how many watts the speaker has?

Hi, liked your detailed video. We have a Beosound 3200, unfortunately the doors are sticking, is there are 'simple' way how can we rectify this? Regards

In 1988 you could buy a Sony CDP-750 for half the price of a B&O Beogram CDX 2 and the Sony was a lot easier to operate and sounded better than the B&O. I must admire B&O for packing average quality Philips gear inside a smoked glass and metal box, and then sell it for 3 times what it's really worth. Back in 1988 it was marketed towards babyboomers with too much money, and that's still the case today. Thanks for sharing the disassembly. I wonder how the player managed to gather so much dust inside, but since you're discarding everything it doesn't really matter anymore.

It was nice to see what this product is made of and the quality that went into it, but this guy went way too far taking it apart. He destroyed the speaker taking it apart. Why not just show it without its covers and leave it at that? I am surprised he didnt melt the whole thing down and show us what its original state was. How is this going to get people to buy one? Just show people the quality of the product and that will do the trick. This was horrible to watch.

If you don't have the remote, HOW do you turn it on!!!???

Love the design and its functionality, but the screen quality is questionable.

So happy that you're taking them apart so that I don't have to 😅

I have an old beolab 2500 and recently the left speaker stopped working. No LED and left speaker not working. I opened the speaker up and found alot of foam rot. Other speaker works and right channel is OK. I don't know which part to replace as I can't see anything burnt. Could you suggest which part I need to change please? Also do you have that replacement speaker foam? Thank you in advance!

How to order for small power supply board.

So you have a coupon code for mi pls

How can we reset the pinkode. We had in storrage for years and we forgot the 4 digits

Dear sir of Kose Trading, many respect how easy you disassemble the 8000. Looks so simple although it is a complex piece of equipment. It is helpful for me. I have 2 issues with my 8000. I hope you can advise me. When I dial the FM frequency dial knob the frequency is not changing? Sometimes it does but only for 1 minute than it stops. Second issue, of the 3 digits of the radio frequency the middle digit the bottom segment of the number 8 is dead. How can I fix this. Thank you in advance for your reply. Kind regards Siert from the Netherlands👍🏻👍🏻🤣🙏🙏🙏

May I know what kind of screwdriver I need?

The connector you call lights is for programming and service,

Good and thorough disassembly! I'm, having trouble with my Right BL4500 that displays the Text UPSIDE-DOWN...

I think this is <snif> a very good tutorial, <snif> but it might even be a little <snif> better when you make a new <snif> voice over, if you get my <snif> drift.

A good one when using a peerless driver like Vifa speakers...

I am having trouble reinstalling the wire drive for the pickup assembly. It seems like the wire is a bit short. I am routing it as per the service manual. Does anybody have some experience in reinstalling this wire?

My ouverture mk1’s glass doors sometimes stays open depending on doors opening speed. And sometimes it works perfectly. What can i do in this situation.

Класс,хорошее отношение к технике,культовая акустика

Great Job Kose! Looking forward to Your next video.😄

You can find the new damping material in our website. kosetrading.com/product/bang-olufsen-beolab-2500-damping-material-insulation/

Tried to charge it with a 5v normal usb charger. Did I ruin it?

Great video, didn't fully help for me though as the red light went back on after reassembling but a few minutes later it was out again. Any ideas?

Have you thought about assembly process? I sent mine to a service guy in Odense, he fixed it. By the way : I can see your nice beard in the mirror- dustcover 🐻

Thank you! This video gave me confidence to strip and refinish my rancid sticky cabinets

Hi I have my beosund1 it off every 3 minutes how I can do to fixed it