- 140
- 315 678
LET'S PLAY RC!
Canada
Registrace 19. 03. 2018
Hello everyone, On this Channel we do everything RC & hobby / tips, tricks, unboxing, reviews, repairs & upgrades as well as awesome action videos. So much more!
Calvin and Dyllan here, We are a father and son who fell in love with the RC. hobby xmas 2015 when we each got a truck under the tree. Since then it has become one of our favorite thing to do! We have learned so much over the past couple years and would like to share with all of you! We are still learning but would love to hang out and share.
We started our channel on March 19 /2018 so we are quite new but like making videos. It is just another way for us to spend time together. We will continue to work hard to put out the best content we can. So hopefully all you guys and gals will hang out for a bit!
Please join us on this adventure by Sharing ,liking and chatting with us. Please consider subscribing!
Until then thank you for your support.
Let's get out and play!!
Calvin and Dyllan here, We are a father and son who fell in love with the RC. hobby xmas 2015 when we each got a truck under the tree. Since then it has become one of our favorite thing to do! We have learned so much over the past couple years and would like to share with all of you! We are still learning but would love to hang out and share.
We started our channel on March 19 /2018 so we are quite new but like making videos. It is just another way for us to spend time together. We will continue to work hard to put out the best content we can. So hopefully all you guys and gals will hang out for a bit!
Please join us on this adventure by Sharing ,liking and chatting with us. Please consider subscribing!
Until then thank you for your support.
Let's get out and play!!
Warn Winch 1/10 RC Motor Replacement Repair/ Lets Play RC!
✅Fixing the 1/10 scale Warn winch, Replacing the motor. When We took out the Traxxas Defender the previously installed Warn winch had a issue. After some investigation, the gears in the motor were stripped. Rather than try to rebuild gears replacing the motor is a better alternative. The gears are very small and not easy to find if at all. The replacement motor is fairly cheap and readily available. (Links Below)
Remember to Subscribe and join the LPRC Crew! so you don't miss a thing.
czcams.com/users/LETSPLAYRC
********************************************
Check out these other Videos:
Traxxas TRX4 Defender & TRX4 K5 Chevy Blazer with HPI Venture. The Trailing Where we realized the winch was broken.
czcams.com/video/4B2JPQRs6lk/video.html
*****************************************
Interested in something we shared?
Product Links:
♦️Replacement motor for 1/10 Warn winch
✅ amzn.to/2Ozk3bQ
♦️ 1/10 Scale Warn winch (We have a few and usually dependable)
✅ amzn.to/3d9UibT
♦️ 1/10 Warn winch control box and remote
✅ amzn.to/3d9Uwjf
🔴 Get Your Traxxas TRX4 Land Rover Defender Here:
👉🏼 amzn.to/31YYOU0
🔴 HPI Venture Toyota FJ Crusier
👉🏼 amzn.to/3a1OIWK
❤️ Tools We recommend:
➡️ Duwalt 12v Driver with **variable torque chuck** A Must Have For RC Hobby!!
amzn.to/3cMez7a
➡️ Team Associated Hex Driver Set & Bits
amzn.to/3rMaVyn
amzn.to/3fDmpBU
➡️ The Solder Station We use
amzn.to/30kvNRN
➡️ Soldering Mat
amzn.to/3t869fQ
Visit Traxxas Web site for the Traxxas TRX4 Blazer
traxxas.com/products/landing/blazer/
*****************************************
Are you a video creator?
Do you need royalty free music for your masterpiece?
Check out:
soundstripe.com?fpr=letsplayrc
For a great selection of original unlimited music licensing at a great price!
******************************************
#LetsPlayRC! #RCIsForEveryone #GetOutAndPlay!
*****************************************
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, We could receive a small commission at no additional cost to you.
Remember to Subscribe and join the LPRC Crew! so you don't miss a thing.
czcams.com/users/LETSPLAYRC
********************************************
Check out these other Videos:
Traxxas TRX4 Defender & TRX4 K5 Chevy Blazer with HPI Venture. The Trailing Where we realized the winch was broken.
czcams.com/video/4B2JPQRs6lk/video.html
*****************************************
Interested in something we shared?
Product Links:
♦️Replacement motor for 1/10 Warn winch
✅ amzn.to/2Ozk3bQ
♦️ 1/10 Scale Warn winch (We have a few and usually dependable)
✅ amzn.to/3d9UibT
♦️ 1/10 Warn winch control box and remote
✅ amzn.to/3d9Uwjf
🔴 Get Your Traxxas TRX4 Land Rover Defender Here:
👉🏼 amzn.to/31YYOU0
🔴 HPI Venture Toyota FJ Crusier
👉🏼 amzn.to/3a1OIWK
❤️ Tools We recommend:
➡️ Duwalt 12v Driver with **variable torque chuck** A Must Have For RC Hobby!!
amzn.to/3cMez7a
➡️ Team Associated Hex Driver Set & Bits
amzn.to/3rMaVyn
amzn.to/3fDmpBU
➡️ The Solder Station We use
amzn.to/30kvNRN
➡️ Soldering Mat
amzn.to/3t869fQ
Visit Traxxas Web site for the Traxxas TRX4 Blazer
traxxas.com/products/landing/blazer/
*****************************************
Are you a video creator?
Do you need royalty free music for your masterpiece?
Check out:
soundstripe.com?fpr=letsplayrc
For a great selection of original unlimited music licensing at a great price!
******************************************
#LetsPlayRC! #RCIsForEveryone #GetOutAndPlay!
*****************************************
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, We could receive a small commission at no additional cost to you.
zhlédnutí: 1 530
Video
RC Body Painting We can teach you / Lets Play RC! #shorts
zhlédnutí 170Před 3 lety
RC Body Painting Before and After! #Shorts For all things hobby grade RC! How To Tutorials, Repairs, Upgrades, Mods, Unboxings, Reviews, Run Videos & So much more! Remember to Subscribe! Join the LPRC Crew! so you don't miss a thing. czcams.com/users/LETSPLAYRC We Want share this amazing hobby with You! Check out these other Videos: Interested in something we shared? Product Links: Are you a vi...
Traxxas Maxx Caster Block Link Replacement Mud Bash With Traxxas XMaxx And Stampede / Lets Play RC!
zhlédnutí 306Před 3 lety
Traxxas Maxx Needed New Caster Block and Toe Link After Our 4s Speed run and crash! So We fix it with replacement stock parts, then take out the Traxxas XMaxx, Mini Maxx and Traxxas Stampede out for a mud bash at the gravel pit. 🔔 Remember to Subscribe, Join the LPRC Crew! so you don't miss a thing! ❤️ czcams.com/users/LETSPLAYRC 🎥 Check out these other Videos: ♦️ Traxxas Maxx 4s Speed Test CRA...
Traxxas TRX 4 Blazer & Defender & HPI Venture RC Crawling New Warn Winch Broken / Lets Play RC!
zhlédnutí 204Před 3 lety
So We took out the Traxxas TRX4 Blazer, Defender and HPI Venture out for some crawling fun. Tried out the new Warn winch on the defender, and something went wrong. (Video coming soon on that) We didn't let that stop us from enjoying the decent weather that day though. Remember to Subscribe and join the LPRC Crew! so you don't miss a thing. czcams.com/users/LETSPLAYRC 🎥 Check out these other Vid...
Traxxas Maxx Closer Look At What Could Be The Best 1/10 Scale RC Basher Truck / Lets Play RC!
zhlédnutí 183Před 3 lety
We unboxed the Traxxas Maxx then we took it for a first run. Now we are taking a closer look at the details and our first impression. The conclusion is that the Traxxas Maxx 1/10 scale 4x4 RTR is a smaller version of the Traxxas XMaxx. The Traxxas Maxx is a awesome 1/10 scale monster truck basher. It could be the best! It has quickly become one of our favorites. Remember to Subscribe and join t...
Traxxas XMaxx Upgrade Spur Gear Hot Racing Hardened Steel 54 Tooth Install / Lets Play RC!
zhlédnutí 2,9KPřed 3 lety
Traxxas XMaxx gets a new upgraded spur gear, to the hot racing hardened steel 54 tooth stock replacement. After installing the Hobby Wing Max 6 ESC, the stock plastic spur gear had all the teeth strip out. So this is in some ways a power upgrade. Remember to Subscribe and join the LPRC Crew! so you don't miss a thing. czcams.com/users/LETSPLAYRC #LetsPlayRC #RCIsForEveryone #GetOutAndPlay! 🎥 Ch...
Antenna Replacement Traxxas Receiver Repair Soldering Used Replacement / Lets Play RC!
zhlédnutí 20KPřed 3 lety
Antenna Replacement Traxxas Receiver Repair Soldering Used Replacement / Lets Play RC!
Traxxas XMaxx Upgrade Better Steering With Traxxas 2085X Steering Servo Install / Lets Play RC!
zhlédnutí 3,2KPřed 3 lety
Traxxas XMaxx Upgrade Better Steering With Traxxas 2085X Steering Servo Install / Lets Play RC!
Traxxas TRX4 And HPI Venture Canadian Winter Trailing / Lets Play RC!
zhlédnutí 78Před 3 lety
Traxxas TRX4 And HPI Venture Canadian Winter Trailing / Lets Play RC!
Traxxas XMaxx Best Upgrade Rear Axil Carriers From RPM part 81732 Install / Lets Play RC!
zhlédnutí 870Před 3 lety
Traxxas XMaxx Best Upgrade Rear Axil Carriers From RPM part 81732 Install / Lets Play RC!
Phone Mount For Traxxas Transmitter Great For Self Video Recording/ Telemetry Display/ Lets Play RC!
zhlédnutí 625Před 3 lety
Phone Mount For Traxxas Transmitter Great For Self Video Recording/ Telemetry Display/ Lets Play RC!
Traxxas Maxx Winter Jumping & Bashing This Could Be The Best New 1/10 RC Durable Fun / Lets Play RC!
zhlédnutí 241Před 3 lety
Traxxas Maxx Winter Jumping & Bashing This Could Be The Best New 1/10 RC Durable Fun / Lets Play RC!
Traxxas Maxx New Unboxing Quick View The Mini Xmaxx / Lets Play RC!
zhlédnutí 162Před 3 lety
Traxxas Maxx New Unboxing Quick View The Mini Xmaxx / Lets Play RC!
Losi Super Rock Rey Bash Canadian Winter Durability / Lets Play RC!
zhlédnutí 718Před 3 lety
Losi Super Rock Rey Bash Canadian Winter Durability / Lets Play RC!
Losi Super Rock Rey 1/6 Upgrade Aluminum Steering bell Crank Assembly Hot Racing / Lets Play RC!
zhlédnutí 3,6KPřed 3 lety
Losi Super Rock Rey 1/6 Upgrade Aluminum Steering bell Crank Assembly Hot Racing / Lets Play RC!
Traxxas UDR & Stampede Mudding Gravel Pit / Lets Play RC!
zhlédnutí 226Před 3 lety
Traxxas UDR & Stampede Mudding Gravel Pit / Lets Play RC!
Team Associated CR-12 1/12 Scale Ford Pickup Truck Wet Land Trailing / Lets Play RC!
zhlédnutí 190Před 4 lety
Team Associated CR-12 1/12 Scale Ford Pickup Truck Wet Land Trailing / Lets Play RC!
Traxxas TRX-4 Blazer & Defender Mudding with HPI Toyota FJ Cruiser / Lets Play RC!
zhlédnutí 918Před 4 lety
Traxxas TRX-4 Blazer & Defender Mudding with HPI Toyota FJ Cruiser / Lets Play RC!
HPI Toyota Venture FJ Cruiser Canadian Winter Driving / Lets Play RC!
zhlédnutí 217Před 4 lety
HPI Toyota Venture FJ Cruiser Canadian Winter Driving / Lets Play RC!
Traxxas UDR & Stampede, Canadian Winters & RC Trucks / Lets Play RC!
zhlédnutí 268Před 4 lety
Traxxas UDR & Stampede, Canadian Winters & RC Trucks / Lets Play RC!
Traxxas Stampede 4x4 VXL Slipper Clutch Rebuild /Lets Play RC!
zhlédnutí 7KPřed 4 lety
Traxxas Stampede 4x4 VXL Slipper Clutch Rebuild /Lets Play RC!
Canadian Winters Traxxas Summit 1/10 bash / Lets Play RC!
zhlédnutí 463Před 4 lety
Canadian Winters Traxxas Summit 1/10 bash / Lets Play RC!
Traxxas UDR Skid Plates by GPM Don't Stick/ Modification/ Lets Play RC!
zhlédnutí 2,4KPřed 5 lety
Traxxas UDR Skid Plates by GPM Don't Stick/ Modification/ Lets Play RC!
Traxxas TRX-4 Blazer / Orange first run /Lets Play RC
zhlédnutí 2KPřed 5 lety
Traxxas TRX-4 Blazer / Orange first run /Lets Play RC
Traxxas TRX4 Chevy Blazer K5 Unboxing and compare to Defender
zhlédnutí 3,8KPřed 5 lety
Traxxas TRX4 Chevy Blazer K5 Unboxing and compare to Defender
Traxxas TRX4 Defender & HPI Venture FJ Crusier early spring trail run
zhlédnutí 286Před 5 lety
Traxxas TRX4 Defender & HPI Venture FJ Crusier early spring trail run
Traxxas XMaxx Jumping Big Air Snow Bank / Lets Play RC!
zhlédnutí 393Před 5 lety
Traxxas XMaxx Jumping Big Air Snow Bank / Lets Play RC!
Traxxas Xmaxx, Losi Super Rock Rey Mud Bogging & Snow Bank Jumping
zhlédnutí 1,3KPřed 5 lety
Traxxas Xmaxx, Losi Super Rock Rey Mud Bogging & Snow Bank Jumping
Can anybody help , my antenna broke off all the way down at the receiver box , the receiver on tracxas website comes with an antenna? It only shows the receiver box with out the antenna
@@tjgetem3783 if you buy the whole complete new receiver it should come with antenna.
here 4 years later, fixing my old stampede ( I fried my clutch)
How's the durability on the gpm hexes?
They are solid! All GPM parts are very well built. Although expensive. We have had no problems. Thanks for watching. 👍😉
I see that spur gear still available on Amazon, how does it hold up?
Thanks for watching. It has been great !!
It's been 5 years of ownership and one of my udrs has a servo that's a little slow under load but it's not broken or anything but I think it's time to upgrade
Does it have the same range?
Yes it seems to have good range like original
@@LETSPLAYRC What is the length of the end of the antenna that no longer has black wires on it?
@@charlesbourget3047 it’s about 1/2 -3/4 inch
@@LETSPLAYRC merci
@@LETSPLAYRC et le petit bout de métal est-il important et où il irai ?
How come you can’t just extend the receiver wire? Why do you have to open it?
The reason you can’t just extend is for range purpose. If there is a break in coax it doesn’t continue and will definitely affect range if it connects at all.
Top job
Thanks for stopping by ! 👍
How much money is it
I believe it was around 400 Canadian when I got it. They have a new model now.
Great help with your video getting my repair done Great to see the father and son team as well.
Thanks for watching. We are so glad to help. 😉👍
Subscribe for Rc related videos. Upgrades, repairs, reviews and more 😊
Good idea, but I would countersink those holes and use some flat-head screws so they dont' get hung up on stuff.
I’m about to start a complete tare down on my super baja rey and super rock rey. Do you have any advice as to where to start and best way to remember how everything goes back together? Its been over 20 years since I’ve done a tare down 🫣
Honestly, there is no real trick to it other than trying to remember and organize all the parts as you take apart. lol. However I do find video recordings help, so I can look back if I run into a snag. 👍😉
Great informative video!! You guys rock! Quick question. If you’re changing your bell crank assembly and servo saver, can you also replace your servo at the time in the same manor through the bottom of the chassis or do you have to take it out from the top?
Thanks for watching! You can remove and replace servo from the bottom. I’m actually working on a servo upgrade video right now. Hope to have up within a week or so. 👍😉😁
Pls do comparison between UDR VS new max slash. Thank you
Hey thanks for watching. That’s a great idea , however I’m sure I want to get the maxx Slash lol. And even if I did it’s not yet available here in Canada. 😁
Great video what tires do you have on the 1/10 scale slash. I just picked one up and the stock tires are terrible
Thanks for watching. 😁 We have proline trencher 2.2 👍😉
I don't Understand why mine won't calibrate... xrt been sitting for 6months no one can get it to link...
I honestly can’t tell you why. It worked perfectly on mine as well as many others who confirmed it worked as well. Perhaps plugged into wrong channel.
Hi I have a completely new tq 6519 receiver, which is not working correctly in terms of the reception signal. after 10 or 20 meters the car does not react. thanks for the help
why didn't you just solder the two together?
Hey thanks for watching. At the time we had an extra laying around. As well I could be wrong but I believe soldering this type of cable messes with its integrity. 👍😉
@@LETSPLAYRC crap now you got inside my head, off the google search hahahahaha
there is a difference between cables, solid can coax can't ,
@@virgilmerchant5291 yes and that was coax 👍
Hey where’s the new RC video’s loving the content
Hey there , thanks for stopping by. Hoping to get some new content soon. Unfortunately things got really busy with everyday life work,school etc. not to mention the whole COPPA and COVID stuff. Dyllan kind of lost interest a bit and started a business as well as his own gaming channel. However we have been chatting and we both miss RC. So we would like to get back at it. Hope to see you soon!
I cut my antenna to make it short now it sucks can’t even go far lol
Yes the length of the antenna is important for Range. That’s why we used the antenna of same length from a different unit.
@@LETSPLAYRC I peeled off a lil from the end and dammmm it really improved the range by triple but I didn’t do the 3 inches like in the vid I only did like 1 inch
We are happy to hear it has worked out for you. 👍😉
Did same steps worked for 2 min then everything is dead and The receiver flashing red and my Max6 is dead with only fan running/ no lights no steering - very frustrating cant re set cant use program card can re set /😢
Hey sorry for the delay. Thanks for watching. Unfortunately I’m not sure what to tell you. We have not had any trouble with ours. Hope you found a solution!
@@LETSPLAYRC no worries- ya my solution was i got a max5 and 1100kv motor/ runs like a beast!!! No problems what so ever
Nice work 👍👌✌
Thanks for watching. Appreciate the complement. 😊
Not gonna test te range?
thanks for this really helped alot😉😁
Thanks for watching. Happy to have helped. 👍😉
Awesome video gentlemen!! Any link for the blue handle torx driver?
Thanks, guys. I needed this tip!
Thanks for watching. Happy to have helped!
Man o man you guys are the best!! Before I saw this video I was not able to calibrate reverse. It wouldn’t beep twice after the 1 neutral beep, it wouldn’t beep at all and found out I was hooked up on channel 1 on the receiver thinking that totally fine but thanks to you guys I was able to then switch it to channel 3 and the calibration worked perfect! Oh yeah and guess what lol, I put a max8 g2 combo in my 1/10 4x4 rustler vxl 🤣
Hey , Thanks so much for watching. We are always happy to hear that we helped 👍😊take care and have fun!✌️
Could the plastic bell crank be the cause of why my SRR looks wobbly up front when driving it? Even on a stand it has a lot of steering play.
Yes it is very possible! As it is a heavy vehicle. However tightening the servo saver may help some as we , but that can also put added ware on the servo it self. The aluminum option will most certainly help.
@@LETSPLAYRC thank you for the feedback! Yea just took mine out yesterday and it looks like the whole front end and wheels coming off hahaha
@@LETSPLAYRC so I’ve replaced the servo to a 5th scale 70kg, bell crank, alum servo horn, alum spindles… and now it wobbles even worse up front! Love the look of the machine and how is a bit easier to work on compared to the Super Baja Rey but damn this thing just doesn’t drive well. Too light on the rear and the death wobble just can’t figure it out!
@@arod7130 that’s odd. Not really sure what the issue would be. Maybe wheels are loose or unbalanced. Ours does not really have that issue. Maybe a bit shaky just because of size. But nothing significant.
@@LETSPLAYRC wheels definitely tight, but I do wonder if debris is inside the seep holes and clogged up making them unbalanced… this car got me spending too much money lol
Love my UDR, just it a week ago and havent run it yet, will be 6s tho
It is a great rig!!
Just paint parts with truck bedliner.
Yep that is certainly one way to do it. 😉👍
Does it have to be 2.4ghz to 2.4ghz only
Hi i m going to do this to my xrt and i have all new connectors traxxas 3070r have you had any problems with the connectors melting or overheating Because they are rated for 30a continuous usage Thank you awesome video
If you could buy one and only one like in my case, which would it be?
Do you mean out of these two in particular?
@@LETSPLAYRC yes
Well there are a few variables, i persons would choose the UDR for the size and power. However if your on a bit of a budget the shahs 4x4 brushless is awesome and a bit cheaper to buy and maintain. With the brushless version and a quality Lopo battery you still some awesome performance in a smaller package. Hope that helps 😉👍😁
@@LETSPLAYRC thank you! I just ordered a UDR a few hours ago, hope I made the right choice lol... I appreciate your responses :)
You did not have to remove the motor or spur gear cover to remove the slipper clutch assembly. Simply remove the top 2 screws, bottom 2 screws and separate the rear wheel assembly from the drivechain. The clutch assembly pulls out freely at this point. Simple.
That's what I forgot to do was remove bottom and top washer to make em spin freely that's why when I would tighten them it would lock up and not love glad I found this video! I have all got racing aluminum parts on mine!
Thanks so much for watching. Glad we could help. 👍😁
thanks very helpful👌
Thanks for watching. Happy to help. 👍😁
I don't see the reason to make two additional holes in the chassis cover on the side where it is slightly raised near the battery tray. If it looks like you haven't used the UDR at all, the whole gmp chassis cover kit looks brand new. to the battery if it seemed like a good idea since the jump or hard bashing could take off. but even so I doubt it since you can see that the udr is a queen of the shelf. but God mod 👍🏼
Hey thanks for watching. 👍 trust me when I say there is not a shelf queen in our collection lol. We bash our RCs hard. At the time of this video the UDR was not very old. The reason we did this mod is that the GPM skid plates come with double side tape that did not hold up, so this was for reinforcement purposes. We have bashed hard sims with no issues on the skid plates. 😉
This is awesome!
Thanks for stopping by. Appreciate the kind words! 👍😉
Why didn't you do a close up, can't see what your doing exactly
Truly sorry. I zoomed in as close as possible without distorting the view.
Never even used my winch. Installed it, rewound the cable, then tried it today and it's stripped
Yea although warn winches are good , there does seem to be some that just don’t last. Same thing happened to us.
I have a question. I calibrated my xmaxx with the same hobbywing esc but my xmaxx is not going in reverse
Thanks for watching. My best guess would be to start the calibration process again. And be sure all servos are plugged into the correct slot in receiver. Hope that helps.
6:09 _It's not the _*_cheapest_*_ thing in the world..._ It's the *Jeepest* thing in the world.
Lol right!! Thanks for stopping by. 😁😉👍
🥴🥴
Thank you so much for this video you saved me a lot of money
Thanks so much for watching. 👍😁
Thanks for your video guy !
Thanks so much for stopping by. 😁✌️
Will these tires fit with the stock HPI FJ rims?
A better view of what you where soldiering would have been nice my receivers have two solider spots I wanted to know if the mess was supposed to be soldiered separate from the the main antenna or are they both soldiered together on each spot
I zoomed in as much as possible without distorting the picture. They are separate solder points. The one closest the the pins is for the antenna connection. The point furthest from the pins is just to hold antenna in place.
Will Ia shortened antenna cause less control range?
Thanks for watching. Yea it will that is why I don’t cut antenna just reuse from another receiver specified for a particular vehicle. If I have one anyways. 👍😉😁
Thanks, my tip broke can go like 30 feet lose signal tull I walk closer, ordered new receiver. No broke one to still antenna from. Lol
are those two tires on the rear able to be used as spares?
Hey thanks for watching 😁yes the tires on the back are fully functional spare tires. 👍😉
@@LETSPLAYRC if I have enough money, do you recommend the UDR over the slash 4x4 vxl? Also what charger do you recommend
The UDR and slash are very similar so it’s really more about how much you want to spend and what size truck works for you. As far as battery chargers, we would absolutely recommend the Venom pro series either duel or quad. However venom has gone out of business and the charger may be hard to find. Unfortunately we liked it so much we never tried any other, except the Traxxas ez peak when we first started in the hobby. We would NOT recommend the Traxxas charger or batteries. Hope this helped! 👍😉😁
@@LETSPLAYRC I had a venom charger a while back but it is broken now. I’ll try to find something else, thanks