Video

Nice try. If there is any drip out of the weep hole, then it has failed. Time to warranty out my chinese Gates water pump again....

In my scooter 300cc the weep hole leak moisture of coolant every time i use it is it normal? Every use there is coolant moisture in the weep hole is it normal???? Please answer

Gates has a install kit. They should send it to a good CZcams mechanic to demonstrate how it is used. They shouldn't be doing it. This plays like an old time factory's fact video, done by a professional photographer but not a personality.

What is the difference between OAP and OAD??? Can we see the difference with eyes??? Can we replace an OAP pulley with an OAD pulley????

Thank you, very good video👍🏼

Is there any point to making the hose diameter larger than the fitting?

When did the 751 die set get released? I’ve always thought we had to swage these fittings.

Hi, the plastic ring that sits on top of the rubber o-ring is called what?

I didn't think that women were able to become mechanics.

There are 2 belts listed for my 2018 King Quad 750 on your site. A regular Gforce and a C12 gforce. Can you explain the difference please?

Damn, Mine had a lot come out on me yesterday.. So my seal is compromised.. What seal?.. inside or the gasket around it? or

not true when doing coyote swap first steps is change pulley with solid one hahah and it works perfect

So.....there trying to sell you a tool...

Great information!

I bet anything if I used my Gates tools on my 2016 Toyota Sienna at 6:00 to loosen the decoupler pulley I would break the tool. Toyota has a habit of way over torquing everything on new cars at the factory.

Dont see your motor pissing water...may want to check to see if hole is clogged or need a water pump

Like you! Straight to the point and Knowledgeable Thankyou

This is the dumbest automobile invention design yet. 😂

It would be nice to have a threaded hole perpendicular to the open end slot, after you have removed pulley or sprocket. Simply insert threaded hex screw into tapered hub perpendicully along tapered edge forcing slot to open slightly

its better to buy a new alternator it came with the pulley ...the problem is the cost of the pulley alone is pretty much the same than a new alternator ...so buy a new alternator not the stupid pulley only

Beautiful work sir

Best cooling system video I have seen. Problem is where to find one who has and knows how to preform this service. Also, how do you know you have enough water OUT to allow enough anti freeze back in. I am due a coolant change on my 2018 Explorer (20,000 miles) but do not trust anyone as most won't let you watch. No Idea who would do this type service in Midlothian Va. area. I am not due until May and am now in recon mode.🦇

Need Help Changing CVT BELT ON KUBOTA 850 SIDEKICK DO NOT SWITCH TO ANYTHING ELSE

I Need Kubota NOT Poloris Can You Help Me

Have a 2013 Ford Taurus with 140,000 kilometers. Had a leak coming from the weephole. Used about 4 liters of coolant in 3 months. Had to wait to get an OEM Ford water pump in. The water pump was functional but leaked. The mechanic said there is nothing noticeable in terms of bearing noise or any issue with pumps funtionality. However, it can fail it the seal blows open. Had it replaced cost $2000.00 That was cheap. Dealer and two shops quoted me $3600.00 CDN. Hopefully this engine will take me for another 100,000 kms. The car is great otherwise.

Much easier to use a flush machine from Mahle, BG, etc

Donde puedo comprar los a sesorios para con bertir mi pc707. En la nueva Gates GC20

Diagnosed my pump on my 1992 ford with this video, my pump was spewing water out of it when I added coolant to the radiator

What I still dont know is .....can an OE pulley be replaced with an OAD decoupler pulley, or does the alternator have to be designed for it? can I install one on my 2001 dodge ram v8

My father pioneered the technology

Promo sm

It's 2023 and here I am working on my Mother's backup 1997 T&C w/ only 54k miles and I'm replacing the water pump and see this weird double sided v ribbed belt that I didn't even know existed...after working for a DCJR dealer in the 90s to 2011 before I went to a specialty shop and I've never seen or heard or these upgrade kits hahahaha. Imagine my surprise when I look one up to order for her and it's probably the most expen$ive serpentine belt I've ever ran across short of niche import or supercars. This is ridiculous lol.

Water Pump was Squeaking was told by Toyota Mechanic to Spray Silicone Spray with Extension Into.weep hole and Squeaking Stopped 3 years ago.has not Squeaked since what is up does this need more lubrication again if Squeaking again

This is funny my brand new pump with less than 200 miles is leaking bad. I can't get ahold of the warranty department.

I'm replacing coolant in my '99 Pathfinder with a waterless. What will ensure engine block is completely drained?

It’s never this easy

Can you use this for hvac belts

Very well explained. If gates products are good enough for your manufacturing needs.I am sold on gates hydraulic hoses Thanks

Normally what I do is remove my fan belt and turn the bearing. I was getting ready to take a 1400 mi round trip. So I normally change the oil and for some reason this time I decided to check the fan belt. I carry a spare one with me but if it's bad I will replace it since I'm home. I was just goofing around and spun my water pump. It was all cranky. Not a drop coming out of the weep hole. I was very lucky back then the stores did not stay open that late on Sunday. Since it was a mustang with the 5.0 engine everybody has that water pump. Ever since that happened whenever I do maintenance on my cars I take the time to spend everything to make sure nothing is crunchy. When I replace my water pumps and hoses and belts I purposely buy this brand. It's something that's been around since I bought my first car and I always use your parts. I can honestly say I don't shop the cheapest price I shop for quality parts.

Audio is shit for a 2k $ tool... this video is dog water. Guys didn't even watch the video before posting it.

THIS SAME DEVICE WAS INVENTED BY THE MEDICAL INDUSTRY 30+YRS. AGO......for pulmonary therapy & is a breathing machine that pulsating air is nebulized to break up deep mucus in the lungs from pneumonia, COPD, emphazymia, & saved many lives from COVID. Its called IPV Therapy by Purcussion Aire, & actually exercises & can restore lung function vs. all the inhalers they prescribe but many hospitals still don't use it due to expense, however home health agencies own these things & can do it in-home for a patient if a Dr. will order it. If you know of anyone with lung problems, they NEED that IPV Therapy ASAP, & tell them you learned about it from a car guy who was involved in the Medical industry! Cool to see it used for a Automotive Cooling system that sort of like has pneumonia!!!!!!!!

Why you not fully install it, thats better

Ok how do I take it out though

Thank you. it was awesome.

How can I know if my pulley is gone bad and alternator is still good?? On Alternator (Town and Country)

Amazing i was wonder what are those 2 holes are for ( my van water pump has 2 holes), that's what i love about internet, internet is specially good /useful for handymen's!!, thank you for showing us this video.

Just replaced a Camry water pump Dayco brand massive seal failure after about 1 week after. Also replaced a Citroen c4 VTS water pump FAI brand and lasted about a week with yet another massive seal failure. Parts have gone to the dogs! Even this guy is trying to cover up leaks and say its normal to get out of warranties and then add an insulting edge to say "don't have a cry" tells me allot about this guy. I've seen 95% of water pumps running year after year without a drip or mark of coolant coming from the weep hole. New pumps should not weep anything at all and if they do, they are crap!

Tengo una prensa pero no sé usarla kiero aprender

thanks for the video guys. The shop manual wasn't very clear

I'm just confused still, iv been working on cars my whole life and as soon as I see water from the weep hole, replace asap. But right now I have a 03 ram 3500 with a 5.9 and the water pump is maybe 6 months old and I notice a little durning the break In period but now I get like this this video says a few drips from the weep hole not enough to even hit the floor and it is intermittent. I would assume this is normal per this video? Or should I replace with a new? That's where I am confused