Video

Thank you so mach God bless.you

You have your cylinder numbers wrong. The are 1,2,3 and the back of engine left to right and 4,5,6 left to right on the front. By front and back I'm referring to the back at the firewall and front closest to bumper..

Greatly appreciated you advice sir. Thank you very much 👍🏻

Giving a thumbs up, but it would have been helpful to explain what you did between 6:00 and 6:10 to make the bottom sprayer fit. I finally figured it out. You do NOT push the part you turn by hand down into the hole. Just set it there, sitting on the top edge of the hole in the filter, then place the top/back pipe on it, and the bottom sprayer will fit right on.

Standard Motor Products SPP154E Coil-On Plug Boot Assorted, One Size This is the part I found on Amazon.

Thanks! Incredibly helpful! Note to self: next time, buy a dishwasher with a filter that doesn’t require a PhD in mechanical engineering to clean.

I'm going through EXACTLY the same issues on my 2007 Honda Pilot right now! When i'm on the hwy & maintain rpms averaging 1500-1800 for more then 5sec my engine light starts to flash & i'm getting misfire issues. I live on top of a very high mountain & if i try to go up in D it starts to misfire. But if i switch to D3 no misfires. My mechanic replaced all my plugs w/iridiums & all 6 ignition coils roughly 2yrs ago but now the light keeps coming back on & my mechanics reader & Auto Zone reads misfires on #5 (middle front). So what is the exact name of these springs or part# please? I'm going to have these replaced once i get that info from you & i'll let you know the results. Thanks!

Thank you so much!! Super helpful and great instructions

Hi what about time? How many minutes says instructions? Great vid 👍🏻👍🏻👍🏻👍🏻

A surprisingly good video. Step by step instructions, quickly. As good as Bentley!

Very nice video and very well explained.....

Great video my man

Ignition coils should just be changed.

I don’t know what I’ve done wrong, but I can’t get my reassembled at the end. The little thing won’t turn at all.

I don’t know what I’ve done wrong, but I can’t get my reassembled at the end. The little thing won’t turn at all.

Hope you don't make a living doing videos. Horrible job

This is something most shady mechanics would rip you off and sell parts while knowing what the problem is

Thank you, Thank you, Thank you. I had no idea how to do this. Your step by step instructions were so helpful!

With the camera there is a black and red wire you showed the red wire placement where can I place the black wire :))

Whered you buy the springs from

The dishwasher in my apartment is this exact model, and it had been giving me problems. Thank you! Because of your video I didn't have to call management and arrange for a repairperson to visit.

Nice bro good stuff

Possibly saving me 2500 bucks my hats off to you Sir

What a terrible design

Ok question why not hook directly to to reverse wire that’s a triggered 12 v with out having to do a relay

Thanks for the video! My daughter bought the sidekick 4 years ago. Her lid broke - I think the silver part has both ends on it still. The underside of the lid broke right under 1 of the pins so the latch doesn't latch. Crazy, right? $200 for the entire lid assembly?! I bought a new open box sidekick on craigslist for $200 (and 6 hours of round trip driving to get it... I just can't pay or have family pay $200 or even $100 on ebay for that part). We'll take the lid off this on, put it on hers. (I found your video when looking for the right way to take the lid off). And sell parts from the whole unit on ebay / keep it for spare parts for her?! Wondering how your fix has worked out after 4 - 5 months? And yeah, you mention - this IS a common problem? Weasels! I always wonder about whether to get an extended warranty : ) And the plastic weld... from your experience, that's different than the typical 2 part epoxy (gorilla, etc.)?

Didn't stop the leak

The whole assembly doesn't just come straight off after you unbolt the two bolts

It might be springtime for cylinder 2 in my 2006 Element.

My car starts but dies 1 sec after cuz of immobilizer someone help

Did u switch the immobilizer and did u have problems with it

This video misses the most important part which is removing and cleaning the grinder mechanism at the bottom

Ah that first cylinder is number 4 then 5 then 6

Mine had water when i opened it.. does that mean it's clogged further beneath?

Thank you very much, I was straggling so much with this stupid construction!

Mine looks different on a 2016. What year? Having a hard time locating Reverse line to use.

Lol... The kids in back ground sound like my grimmlins..

Thanks for the great video. I just cleaned my dishwasher with ease

THANK YOU! I have a whirlpool but couldn't find a video on my specific one (a few differences that were not helpful) and couldn't find anything for removing the filter thing in mine but your was so close to mine I could follow you! THANK YOU!

How did you get the struts back in? The suspension springs up when shock is removed. You need to pull the wheel down and push the shock up. So far no joy on my 2014 Q7.

I have a question. I have a 2006 Jetta and it really needs a sensor replacement because I am not able to pass vehicle inspection tests. Even though the video you showed looked simple, would you still recommend me to let a mechanic replace it? I'm just curious if I done it myself I can mess up the computer.

Thanks Cameron. You just saved me from having to purchase another dishwasher.

thanks so much! very helpful

I used different bolts, next time no drilling

Wait where was the filter? I didn’t see it

Thank you so much it was very clear. It was very helpful when we needed to clean our drain at 9PM because the dishwasher wasn't draining anymore :)

This was insanely helpful. Mine had a couple pieces of broken glass down inside the spindle area, keeping the bottom wash bar from spinning. Easy fix once I understood the disassembly. Thank you.

It didn't fix my problem what else can I do...

Yep my check engine light even flashes as soon I start the engine

Please please help I'm having the same problem I have a 2003, and my engine is worst every time i installed a fuel pump new spark plugs new coils but don't know what elsr to do... My next target will be fuel pressure regulator ... Please please help