- 49
- 36 741
RC Hammer
Registrace 3. 02. 2014
U Can't Touch This!
Karting Through the Shops - ‘Straight Outta Specsavers’
Go Karting through the shopping centre with my boy!
zhlédnutí: 81
Video
6ft Radio Control Titanic - Maiden Voyage
zhlédnutí 2,8KPřed 10 měsíci
Our homemade Titanic’s maiden voyage. Powered by my Hobbyking Apparition on 3s.
Minimoto starter motor made from Makita 18v drill.
zhlédnutí 57Před rokem
Using my old Makita 18 volt cordless drill as a chaindrive minimoto starter motor.
Starship SN5 water rocket
zhlédnutí 312Před 4 lety
Starship bottle rocket with Robin, Woody and Catboy. Laura is playing Tim Dodd.
UMX T-28 Trojan with flight control modes....
zhlédnutí 54Před 5 lety
Switching between full flight levelling control (SAFE) and AS3X. Yes, I do film with an iphone rubber banded to my head.
UMX F-16 DF Time to get a trainer.......
zhlédnutí 31Před 5 lety
If at first you don't succeed, fly, fly and fly again. Then get something I can fly......
UMX MIG 15 DF learning to fly.
zhlédnutí 94Před 5 lety
UMX Mig 15 Flight with Co-pilot Robin. Nearly didn't crash............
Traxxxas E-Maxx Owners Honest Review
zhlédnutí 4,3KPřed 6 lety
In this vid i clarify some out of the box issues with the Traxxas 6s Emaxx and some ways to solve them.
Accucell S60 - How to Charge a LiPo 2s 4000mah
zhlédnutí 8KPřed 7 lety
Accucell S60 - How to Charge a LiPo 2s 4000mah
Boys day out - ProBoat Blackjack 29 plus experimental rescue boats, Lassie & The Badger.
zhlédnutí 148Před 7 lety
We took each of our sons to an Oxford river to test kits modified rescue catamaran (Lassie). Also a questionable plastic v hull (The Badger) which featured in a previous video called Boats and bagpipes as an fpv boat. A good day was had by all and the newly adapted rescue catamaran served its purpose.
Proboat Blackjack 29 v3 and Apparition 29, Oxford bridge, raw footage.
zhlédnutí 205Před 7 lety
Messing around at Donnington bridge in oxford with 2 catamarans.
TBS Caipirinha - FPV Maiden flight from Hell
zhlédnutí 43Před 7 lety
TBS Caipirinha - FPV Maiden flight from Hell
Scalextric Mini with Radio Control System and 550 Motor
zhlédnutí 171Před 7 lety
Brushed 30 amp ESC powering Scalextric with 550 can in a Mini
Dishwashing Scalextric Track at 50*C
zhlédnutí 316Před 7 lety
Dishwashing Scalextric at 50 degrees C Plastic came out well but metal not improved.
Scalextric Mini with 550 motor test
zhlédnutí 989Před 7 lety
Big 1:10 scale 4 x 4 Motor in small Scalextric car. 20 tooth pinion, bigger wheels, 550 motor, extra magnet, and widened wheel-arches. Needs more juice............ Music by Dizzee Rascal - Bonkers
Night dig with the Huina Excavator and dump truck
zhlédnutí 206Před 7 lety
Night dig with the Huina Excavator and dump truck
Setting max speed on Garmin Forerunner.
zhlédnutí 7KPřed 7 lety
Setting max speed on Garmin Forerunner.
Apparition II Full Speed - We're Gonna Need A Bigger Lake
zhlédnutí 132Před 7 lety
Apparition II Full Speed - We're Gonna Need A Bigger Lake
Crashed Lost DJI F450 - Tracking with 433Mhz Locator Beacon. PMB New Zealand. rcbeacon.com
zhlédnutí 2,7KPřed 9 lety
Crashed Lost DJI F450 - Tracking with 433Mhz Locator Beacon. PMB New Zealand. rcbeacon.com
DJI Motor, FPV Hydroplane Airboat Catamaran - Fail 2
zhlédnutí 223Před 9 lety
DJI Motor, FPV Hydroplane Airboat Catamaran - Fail 2
Quadcopters at a Climbing Wall - 2 DJI F450's - High Sports Brighton - - A Forest - The Cure
zhlédnutí 205Před 9 lety
Quadcopters at a Climbing Wall - 2 DJI F450's - High Sports Brighton - - A Forest - The Cure
hahahaha leo
HI DUDE
What if the charger say connect check?
It means check connections - wires not connecting somewhere between the charger and inside the battery.
What scale is that?
Doesn't sound like there's that much that needs to be done. Good to know. Have you done any further mods or upgrades to the emaxx?
Hybrid diffs with lst2 diffs.
Rpm bulkheads,metal driveshafts,rpm arms,integy shocks,rpm or aluminum shock towers. That will make a huge difference
What is going on with it
Mine is set on max speed but want show max speed
Is the amps what mah battery it is so if my battery is a 1.2 mah I sent the charger to 1.2 amps ?
Nice looking video, nice views from above with the drone. Keep up the flying, thank you for sharing and have a good day!
That's perfect! Can i ask how you made starship?
Thanks! I wrapped some .5mm (ish) plastic sheet around a water bottle, taped up to make a tube, then cut out shapes at the top (concave triangles) so I could tape the top to a point. I made the fins by folding the same plastic and cutting to size (if the fold is the outside edge you can make a couple of 30mm ish flaps to join the fins with) my front fins are SN0 shape! Then I added strips of 50mm foil tape to the fins and to the body to look a bit like the ring sections. I made the ‘cork’ out of an old tube of silicone that had set hard but you can buy kits. The plastic bottle came out more easily after a few launches. Enjoy!
Thanks for the pointers!
Mr hammer , is it possible to run 4s on stock brushed e maxx ...
2s yeah, MAYBE 3s if you watch temps definitely not 4s you’ll burn up the motor and or esc instantly
no heat to dry the track what is the melting point
How long would this take to charge a 3s lipo 5000mah approximately? Also once charge is complete will it automatically shut off or will I have to watch it the whole duration
Thank you so much I can’t find any besides this one I found a months ago and just yesterday A new check it out
Thank you! Just what I was looking for.
I run my emaxc on 3s an still do back flips bit i also habe the metal 15 tmaxx nitro chassis an love it it dont bend am i beat this thing
I have a tmaxx conversion an i take mine to skate park an it last but the shock towers suck stock that is rpm is the way to go i only have rmp center skid plate an rest is stock but 6s is to much for these smaller scale i only run6s om my bigger 1/8 n the emaxx am tmaxx are 1/10 in traxxas eyes but they are bigger then the reg 1/10 lol
Very informative, thank you. I was having that very same issue with mine. I could not record my max speed on my RC cars.
You are going way too fast to follow along and what button to push
Thanks I wouldn't of thought of that. Just brought one second and and been fiddling with it for ages trying to set it up for speed runs.
I have the brushed version ready to upgrade to a brushless motor any recommendations
Hobbywing max 10 or the max 8 is. Bigger but you can still do flips on 3s you dont have to have 6s to do flips my emaxx dose flips on 3s 57 18 gearing
Or Castle sw4
Thank you
Thanks RC Hammer for the video. Does this Forerunner 201 also have a timer function (manual start and stop like with a stopwatch)? I need it for logging in max speeds for my RC car(s). I gave your vid a like.
The end of the flight looks a bit like one of Orville and Wilbur's early efforts, but an RF drone tracker is a great idea.
Thank you it was a great help!!
Thank you very much big help
do you have the plug in the little plug? My zippy 2S has a smaller plug than that 4-pin that the charger comes with.
Only when balance charging.
it will still work, just make sure it is plugged in all the way to the right.
yeah same mine is a 4 pin and the slot is an 8 pin
I wish I could see this video! I need to set mine up!
Dustin Lanier me too mate. I made the vid and I can’t view it either. If I can find another vid explaining I will send it to you.
Sweetest kid on earth! 💖💖💖
Thank you very much sir !
Have you used the discharge function with the batteries? Will it show the voltage as it discharges and then you stop the process when it gets to the voltage you want?
I have not used discharge function, but it does show voltage when charging so i would expect same when discharging.
how can calibrate this charger?
Sorry Bud, no idea!
Thanks mate
lol very similar reactions when we did it except we had the added difficulty of flying a mini quad racer rather than a super stable phantom.
Great video and very informative, would it be possible for you to send me the address for where I can buy one of the tracking devices they look like a really good thing that can help me save my quad in the event of a accident thank you for posting best wishes from Yorkshire
ely mental Hi mate, They are mail order from New Zealand, ---------------- rcbeacon.com ------------------------- All the best from Oxford
Thank you.
The left front rotor had come loose. It was fully uncontrollable. It had landed upside down in grass. If I had fitted a GPS locator it probably would not have had signal. The battery had come off so it was emitting nothing except a tiny beep and a 433MHz pulse. I know I keep going on about it, but I am certain my craft would still be in that field now if I hadn't fitted that lightweight tracker. Up to 15km range with a full receiver aerial - 4 weeks tracking time - Two years standby. Each transmitter is about a fiver, it's less 60 quid all in. I wouldn't leave ground without one!
Good work
Excellent video great location first climbing wall flight that I have seen thanks for sharing
Brilliant :) Will nick this for social media until I have the time to do some editing of all the footage - cheers for coming!
lol you got yourself a sub
I have an X4 (v3) with a mobius cam attached. Both are running on a single 600mah battery and hubsan stops recording when the battery low -lights start flashing on the hubsan. Works nicely!
Did you try to remove all plastic parts to save some weight? And replace battery to something smaller? As I read in tests camera PCB + lens is 17g and standard battery 10g. Total weight is >40g.
Interesting idea. I'm guessing if we wait though Hubsan will do it for us!
Ha... I was just thinking of trying this.. your video saved me some $$.. thanks
Glad to be of service.
I enjoyed your clip. Great stuff! Thanks for posting.
so the hubsan is too weak to lift the mobius? :/
Hi Exacom98, That's true the Hubsan X4 can't lift the Mobius ActionCam.
Manuel Couto It does 'lift' it, just by ground effect. Essentially a hovercraft. You're right it just won't fly tho.
If you are a flying ace AP Mode (the new V2 purple light mode) would feel feel slow, but for me, it's forgiving enough to learn on. The V1 FPV mode (Stability) is really fast, fun at height but too fast for me to enjoy any proximity. You don't loose this with the V2 firmware though, just flick a switch in flight. One day it will will be where I'm at, but today AP Mode was fantastic.
I did that up at a good number of feet lets say a few hundred and I had a hike to find her all intact, glad you did not damage anything
Ow! It was dumb luck that I had nearly landed. How did yours survive the landing? You are one lucky dude!
It is not electrical, even though it looks like so, it is due to how camera records. It is sun glare. First one is sun mirroring in the car window and second one in the rain puddle. Looks cool though, i understand your confusion.
***** I think you have it, good knowledge!
LOL! Good Stuff!