Video

Hello Elvis... greetz from France...i m hoping you are well... i have bad feeling you stop so unexpectedly 😢

Does anybody know if Elvis is ok? It's been a long time since he's been on youtube

Great video

Five different loads out of the same gun. Impressive!

Very helpful and informative video. Thanks Elvis!

When shooting blanks or just primers and a revolver, you actually have to modify the primer pocket-size. Because you don't have the pressures pushing back on the shell casing to reset the primer

Where did you go?

Are you alive?

How much did they pay for your rotten soul fellow gun owner?

Why are you promoting dangerous ammo!?

Slow asffffffffffffffffffffff😂

Watch this video many years ago. It got me into getting a Lee hardness tester. What I learned using this tester is I was wasting resources that were antimony and tin. As I was casting too hard of a bullet unnecessarily.. I was casting around 1516 BHN when realistically I only needed around 12 since I was Powdercoating. Light target loads for 9 mm up to 1000 ft./s. 124 grain up to 150 grain.. I probably could’ve continued casting 15 BHM, but the resources like I said I was wasting was wasteful in the long run.

You still with us brethren? Miss your videos man!

Fe is Iron, dude.

Did you have to flare the brass?

dude i love how quick you did this . i will try this trick myself thanks

Thank you for the thorough tutorial, I’m going to take your suggestion and make my own

What is your b.h.n for the lead

Bullet key chain mr.

Solar and wind won’t run everything the way everything is designed currently. It has been known for DECADES that solar/wind was coming and NOTHING has been done to make it happen… Decades ago it was calculated that a solar array the size of Montana and enough batteries to store the power (years before Lifpo4 batteries) could supply the entire country. It’s an absolutely ridiculous concept, but it was a known concept. If A/C and dryers were made more efficient and usable to solar/wind you could have “free” power and that’s the reason why the utilities are still spreading misinformation. I lived in San Antonio for a time where the power company is owned by the city. They had solar panels banned from being installed within the city limits for YEARS until public pressure and the fact that they wanted to charge a “premium” for wind power and they finally gave in to the pressure of being allowed to install solar panels to allow them to put up wind turbines… Now if a city owned power company can actually make money from installing windmills, why are people still stuck on the idea that it’s not a viable option? Because the only information being put out are the failures from years ago. They have hidden the numbers for the power “buyback” of excess power generation and it’s not public information at all and they don’t even publish those numbers ever. And don’t even try to bring up the 2021 winter storm, most of that was due to trying to supply power to other cities and the equipment infrastructure being useless in snow. They have known for decades that it needed to be “hardened” and chose profits first, let’s not even bring up the fact that the entire state is isolated from the rest of the country’s power grid, once again, profits over usefulness. Power generation is big business and the “little” guy will always lose.

I have been watching Elvis for years, always high production quality, great subject matter, and a guy who puts it to the test, is willing to try new methods, and is easy listening for reloaders like myself. Thanks Elvis ammo

The first primers that I ever bought back in 1977 were called “Sac Mags” and a can of Alcan powder.

Thanks again for another very good video. Great to hear your voice! Hope you are still doing well in this crazy world.

18.8 gr.H4198 @1800 fps w/150gr. fmj hornady(308) Shoots Saweet thru my Romanian w/Wolverine! The Berry's 220gr. with 13gr. CfeBlk Subs are Amazing w/Wolverine Try it they cycle Great , I do have adjustable Gas on all 3 AK's and this load is Perfect!

What has happened to Elvis Ammo? Does anyone know where he is?

The company seems out of business the website does not work anymore. There are reports all over the internet their ammo have issues and causes malfunctions to customers’ firearms and injuries. Rule of thumb, don’t buy ammo from company that uses other manufacturers’ brass or makes re-manufactured ammo. Only buy ammo made by reputable manufacturers.

Awesome job by Elvis exploring the limits with Zinc!

Thank you for your informative video. I am a newbie beginner on solar panel wire connectors. Just the video I needed to watch. Thank you again.

👍🏻👍🏻🎉🎉🎊🎉

Great ammo comparison and test by the great Elvis ammo! One of the original lead bullet men on U tube! I still love to watch these tests years later.

I recently experimented on using spent LARGE PISTOL/ RIFLE PRIMERS AS SUBSTITUTE GAS CHECKS FOR .223 LEE BULLET MOULDS CAST HEADS..😊👍

Still good information all these years later.

Havent seen you in a couple years. Hows things going? Are you ok?

Yr ol heavy duty wilson looks spankin

What happened to your channel.

Hey Elvis, am trying to get the accuracy that I need. The mold is great, producing some awesome rounds. Question: what are you using to size them to .311? Sizing mine to .309 and the accuracy is horrible. My barrel is .311 and the bullets are dropping out at about .312 - .314. Could my accuracy issue be due to the difference in the bullets and the barrel. Would really appreciate some help, Thanks in advance.

So hard to watch this. Very little information. Lots of strained and broken sentences/train of thought although I’m sure you have good knowledge about this.

What is a good all around hardness for a lead bullet

One thing I really want to see is load development with zinc bullets cast in molds that would be ultra heavy for caliber in lead (such as what would be a 450 grain lead bullet mold for .452, but cast in zinc instead)

You’re basically the only or best CZcams channel out there experimenting with cast zinc bullets. I really appreciate your work.

I have one question, this primer material is made with various acids, is the end result corrosive ? Do you know if there's a way of home-making any non-corrosive primers ? I'm all for the home-made (mainly for budgetary reasons mind you, that and the pleasure of shooting something you can proudly say "I made this myself"), but I wouldn't want to fire corrosive ammo in my guns... Thanks for your work, your videos have been among my main sources of info from the start in reloading, bullet casting, and powder coating.

Thank you for the sharing. the only problem I have here to start reloading 7.62x39 is the high cost of the Large Rifle Primers!

I will say I have tried many powders for cast 55 grain and 65 grain 223 reloads and nothing has come close to Accurate 2015 for function and accuracy. Just got an 8lb jug for loading up all my powdercoated 223 ammo. Thanks to Elvis Ammo and this video in particular for the tips on accurate 2015!

I purchased a 5 lb bag of 100% pure citric acid on Amazon. Lemi-shine is only about 85%. All you need is enough to fill a .45 ACP case. You'll have enough citric acid powder to last a long time.

Hey Cat thank you for this Video. I've wondered about this before but had no way to test hardness. You are on the cutting edge of our endeavor to find new and better ways.

Boy you have a great setup. Loving that lead setup.

Where are you Brother?

Happy 4th of July 2024. Thanks for teaching my the 140-4 method. Hope we'll see ya reloading again someday.

Great job man I'm loving it. Hot dam I might have to give some of these loads a try. Thank you, sir.

There are a few factors that play a role with scales, either cheap or expensive : resolution, repeatability, linearity and damping . You should use your cheap scale the way it’s designed to work. An expensive analytic scale will take seconds to stabilize but that’s a different league . The cheap scale work surprisingly well if you make it re-weigh by just touching it . A kernel of powder often ist enough to trigger the scale. If you know this these scales a useable for normal use ( to periodically check a powder load). For trickling loads for f class it’s a different story