Video

Yes almost 2 decades

Thank you! Check out the follow up video also.

Coming from the USP have you tried the P30?

It’s a standard T10 head and whatever screw size came with the optic.

@@PrecisionDefensiveSolutions I bought mine second hand, all I know is it’s a factory VP9 optic cut. Wasn’t wanting to order a set of torq tools if I can just order one

Sorry I don’t know the size screws Holosun or Trijicon sends with the optics. You’ll have to contact them.

@@PrecisionDefensiveSolutions I found out that I can use the Holosun scs and won’t have to use a plate. My question was what size torq bit goes in the oem slide plate. It should be the same for every VP9 oem cut plate

Yes the SCS is a nice option. I’ll check the bit size for you this morning.

Will do!

I can understand why you keep going back to the VP9sk

Thanks so much!! Growth always seems to happen each time. Keep it up!

What data are you using to make a claim that gun fights among average concealed carrier holders only occur at 5 yards or less? Also by saying that the average will just point and shoot there is extremely high risk legally there. Also a flash sight picture is used with a dot also.

@@PrecisionDefensiveSolutions Not likely for the average cc person.

You said at conversational distances where normal human conflicts begin. So again where do you get that data?

@PrecisionDefensiveSolutions Are you kidding? Five yards or less, is recorded in the stats. Doesn't take a rocket scientist to figure that the stats at that distance is conversational distance. Keep digging your hole, cuz the dirt is now falling on top of you. Geez.

You can get pissed off all you want. I’m just asking where you got the data from. But, since you’re refusing to provide a source I have to assume that it is just your assumption.

I had a stock LEM & DA/SA version and I greatly prefer the LTT version. The reset means very little to me since I don’t pin the trigger and then release to the reset point. I let the trigger all the way out and reset while it’s recoiling. However the reset on the LTT is significantly better. I did the extra light springs yielding about a 3.5lbs trigger pull.

Thanks! The LEM version is simply a precocked hammer spring not a two piece hammer.

Glad he did good for you. I had a train wreck experience with Rick.

I have a P30 LEM that I am quite fond of. Haven’t made the decision to go to it 100% yet but I really enjoy it.

I’m actually considering switching to my P30 LEM LTT from my VP9. I love them both and I am starting to shoot the P30 slightly better but we will see.

​​@@PrecisionDefensiveSolutions Any further thoughts a month on? Could totally see myself giving the P30 a go.

@@PanarchyTheater I love the P30 LEM especially the LTT version. But, I have carried a VP9 for almost 5 years. Straight up I have never kept a carry gun that long. I will stick to my VP9 for years to come. Unless H&K puts out something even more amazing.

went through a few then found HK. I first bought a V3 p30sk but sometimes would forget the DE cocker, not good. Went to a P30L LEM with night sights. Didn't like the night sights, Great pistol. Then bought an HK p30sk LEM LT and am here for good. I don't like striker fire because of the holstering. The LEM you can put your thumb over the hammer. No safety, great trigger, second strike, and love the phosphorescent sights. It's totally stock and it's perfect. 10+1 to 17 +1 mags also.

Fine balance to it bro, I think it’s best that you’re not legally allowed to use/brandish a firearm in anything that is less then life threatening.

Property is replaceable life is not. Insurance is there for a reason.

@@PrecisionDefensiveSolutions why let them go ? Just so they can go do it again to someone else, what if the next person had a kid in the car. Even if they are caught I don’t want my taxes feeding someone like that.

Well I guess you’d rather eat prison food then. Look I don’t like that criminals are doing these things over and over anymore than anyone else. Joining their ranks doesn’t help the situation. If you aren’t LE public safety is NOT your responsibility. The your life and the lives of your loved ones are. You can’t protect your loved ones from behind bars let the cops deal with them over property.

@@PrecisionDefensiveSolutions I’m not saying that’s what the law is right now, I am saying that’s how it should be, it would help clean up the streets finally instead of the catch and release justice system we have.

Chris who?

@@PrecisionDefensiveSolutions Chris Griese

Yep, it’s absolutely one of my favorites

Yes it was very fundamental. It was his first time shooting.

I don’t think it’s the only one that makes sense.

Awesome!

Bwahaha.... Now that's funny.

Thanks! Glad you enjoyed it.

Great to hear!

We recommend Haven Defense Co. havendefenseco.com/?ref=0ym8aijp

I don’t think there’s any reason not to go with the optics ready version. The only reason I think that someone would stick with iron sights in today’s world, is if they can’t afford the optic itself.

Thank you 👍

@@Franziskaner1911 you’re welcome

@@PrecisionDefensiveSolutions Do you recommend the Vp9 to your students or Vp9sk. I’m undecided.

It really depends on what each individual likes what their needs are. Here is the joy of being an HK brand ambassador, I have multiple VP9’s a & VP9sk’s they can shoot and see which they like best. If you are in my area we can make that happen so you can decide. Otherwise I’d suggest trying to find a range that has them for rent. I carry a full size with a comp personally. My wife carries the SK w/ a 15 round mag because of her physical size.

Honestly, I don’t know I’ve never paid any attention to them

Love hearing that

What optic do you have?

Cyelee CT2 Shake Awake Green Dot Micro Mini Reflex Sight 3MOA for RMR/SRO Footprint Pistols @@PrecisionDefensiveSolutions

I’m not at all familiar with those. My best guess is there is something work with the unit.

There are a few

Depends. Contact Langdon tactical for details: langdontactical.com/hk-p30-lem-series-pistols-by-ltt/

I don’t have a duty holster. I train solely from concealment. But, we only recommend the safariland ALS holsters for duty style.

@@PrecisionDefensiveSolutions that's what I have for my old duty weapon. They do not have an exact fit for the VP9 with a Holosun SCS. So I am looking for anything that will work.

@@ATX-oy8bi gotcha sorry I couldn’t be more help.

Thanks I appreciate it

I just got 2 new VP9sk’s and the flush fit mag wasn’t included at all. 13&15 only

That’s how mine came…13 and 15 rounds lol…I had to order some flush fits but I think HK has a special where you get 4 free mags now

@@RepentorPerish77 yes they are running a $200 rebate special

Thank you! So glad it was helpful!

Hi John I’m not quite sure what you’re asking me so if I’m answering this incorrectly I apologize. When, using a dot on a pistol you should not be focused on the dot at all. In fact you should be focusing your vision on the target and super imposing, the dot over the target. I hope that helps you out and answers your question. If not feel free to respond here or reach out my email.

The goal was not to teach you how to operate it. It’s basically the typical Holosun operation.

So glad you are happy with it. What light are you using? That seems to be the issue with most light bearing holsters availability.

@@PrecisionDefensiveSolutions I’m running a TLR 7A.

That shouldn’t be a problem. We use haven defense co. and those are some of the best in our opinion. Use our link from this page: ncpda.us/haven-defense.html and save 10% on it. Brent is great to work with. Or direct: havendefenseco.com/?ref=0ym8aijp

I don’t have a clue where that comment came from. No one I mean NO ONE is a perfect shot. The only assumption being made is by you

I agree on the extended mag. The benefit I see with the SK is with it being a shorter slide / barrel for some people it would be easier to carry AIWB. The extended mag vs. the full size is ever so slightly shorter. But it is negligible in my opinion. But the SK does give you the ability to choose the shorter mag if you need to.

The tool used was a fix it sticks kit. You can get those on Amazon or at Brownells.

No there is a significant difference in the reset between the normal and GG version.

I don’t have a range that I can regularly film at. That’s why you don’t see me shooting on here. Hard to film on a public range. As far as qualifications go visit my website the vast majority of my resume is there. Watching me zero the a gun isn’t going to teach you to do it.

Grayguns triggers are amazing probably the best available. I do wonder if I would have preferred the curved trigger rather than the flat one.

​@PrecisionDefensiveSolutions I think the flat trigger kinda looks weird and might bend so I wondered how it would be with the regular trigger and just the reset

@@LUIZS87it may have a odd look but it is quite strong. It’s not going to bend

​@LUIZS87 You're afraid the metal trigger is going to bend. Not going to happen, and the regular trigger, as you call it, is polymer and definitely flexes when pulled in double action.

But there is an answer for that

Glad it was helpful!

I purchased that block directly from HK. I know they’re out of stock on their website now, but you can contact present arms and see if they have them available.

@@PrecisionDefensiveSolutions thank you! will give it a try