Video

Nice thanks for the info i got it very easy I thought I have to hammer this thing 🎉🎉🎉

Do I need crescent wrench

Thank you!! I'm upgrading my shower head builder used this Moen style but I could NOT get it off! I got a higher ladder positioned it STRAIGHT as you said then used my channel lock voila! You're my Hero

thank you for posting this

Wow. Solved a very specific problem for me. Thank you!

This is a fabulous idea, very ingenious and straightforward. I hate wasting batteries on things that could easily be plugged in. We have a wireless outdoor thermometer and the indoor part chews through batteries like crazy. I’m definitely doing this.

Damn! I’ve been meaning to make a corded vibrator. You’ve saved my life! ❤️🙏

or just solder a wire on directly onto positive and negative terminal instead of using a dowel?

why can you not just use dead battery instead of cutting a dowel and put wires on it?

Not sure but I read you should never use plumber putty on shower head tread . Only plumber tape . Anyone know ?

Very helpful. Thank-you! 😃

All the bulbs are burnt were do u find replacements not all fit ?

Might as well put new string of lights on

Thank you do much!!!

Excellent, thanks!

Just toss that shower head into the trash and buy a new shower head of a different brand

I dropped my stud earring down the overflow drain by accident.

I want to make my pre-ligth Christmas tree to blink can you help me

Excellent and timely video! I'm doing some mods to tweak the water flow and this helped a bunch. It's a blind assembly and learning about the spring loaded/press fit did the trick. I was able to get it back together pretty easily using a vise with plastic jaws which kept the shower head from getting scratched up. Easy peasy!

Very helpful! Thank you!

Moen warrant

This was a big help. The final mile reassembly is quite hard, but I found that if you push the pivot ball in far enough you can flip it over to the shower side and squeeze it together. The wrench did work to push that pivot ball far enough in. Thanks again!

Just what I needed, thanks!

Great job on this video! I would’ve never been able to do this without it!!

Mine is 95% new, but it required more than 10x of the force to open that way. What a terrible design.

Any clue how to get small rubber bands out? My daughter decided to put those small rubber bands in the overflow hole. They are the ones that make those bracelets. Thanks

Thank you. I hoped it would work for my Moen A112.18.1m brass shower head, but while it looked the same, it would not pop out.

Some elaboration on the process: Remove the showerhead as described, then thread a short piece of 1/2" iron pipe into the showerhead. Turn the showerhead face down on two boards, with the white plastic face and rubber nipples clear of the wood and the wood supporting the face of the metal cover. Give the iron pipe solid whacks with a mallet/hammer until the showerhead insides fly out. The ball of the ball-and-socket will stay on the iron pipe. Clean the innards as described in the video. When reassembling, put the showerhead innards face down on the floor or someplace sturdy, slip the metal cover over them, then insert the ball with the iron pipe still attached. SIMULTANEOUSLY push down on the iron pipe (until the ball is pushed deep within the innards of the showerhead) AND force the metal cover down. With enough force, it will snap in place.

Perfect thanks. Just finished doing mine tonight

A serious question and good that you uploaded this 2 years back. Could you please tell me your long-time opinion on these out of the bunch, how many still work OK, and how many died or misbehave? Thanks

0:50-power outlet or power CHARGER??

Thank you for the video. It was very easy to follow. I would have been fighting with this thing for hours and probably would have broken it. Have a great day.

You’re amazing dude!

I am having hard time inserting the swivel thing into the middle shower head, anyone has tips how to do it? I tried following the steps in video but it’s way too hard to insert it.

Hi! I love this video, such a great idea!! Anyone know how I could tackle a device that takes 5 AA batteries? What specs wall adapter should I find? Also in this one he attaches each positive and negative lead to one battery each, how would it work spread across 5? Thank you!! 🙏🏾❤️

You can take out that entire unit -the cylinder with the ball- just by getting a screwdriver and putting it under the lip of the very outside edge & pry up gently. Just buy a new ball clasp at Menards or order on line. Put the new unit back into the hole. It comes in a little package that has the drive-in cylinder and a strike plate with a couple of screws. I didn’t use the strip plate -all I wanted was the drive-in cylinder and it worked beautifully.

Yeah that reassembly didn't work for me at all. That metal ball piece popped out and the rest popped into place, basically ruining the whole unit.

Thanks for the tips!

Solved my issue! Thank you!!

Sir thank you so much! I've been trying to find a video for months to know how to disassemble my shower head and finally you help me!

Put a little hair conditioner on the ball when reassembling and it snaps in much easier.

Very helpful!! Thank you!!

This doesn't work on Moen A112.18.1m shower head. It just won't pop out.

I am trying to di the opposite change from batteries to wall plug . Which is which on a little motherboard that dont have a plus or minus on it ? Can someone help me out here - anyone TIA

Thank you - this helped. I couldn’t figure why this shower head was not coming off but your video helped and now I changed it!!!! Thanks!!!!

Thanks for the tips!

this guy will be responsable, fo r lots o people burning their gadjets bad person ,

Everybody is asking where to buy that little wrench and what’s the name of it. Why don’t you help on that?

Saved me a bunch of time and aggravation. Thank you great help!

Hi thanks for the tips. Disassemble was great. Have a tip for the last step of snapping the ball in place. Turn the assembly upside down from where you have it in the video. Then press down on the white perforated plastic piec until the ball is where you want it inside the plastic (all the way down as far as possible). While continuing to press down on the perforated plastic piece (keeping the ball in place), simply pull up un the brass trumpeted piece snapping it into place. Hope this works for everyone else.