- 268
- 1 203 247
TubelineMfg
Canada
Registrace 17. 05. 2010
Tubeline Manufacturing
Tubeline Manufacturing sold their first inline balewrapper in 1995. Today the balewrappers are shipped into 6 continents and continues to be the flagship product of Tubeline's hay equipment. Numerous hay handling and processing machines have been added over the years, including the addition of Nitro Spreaders.
Our Mission
Our mission is to provide innovative equipment and value to our customer, by being founded on Christian principles and Honoring God in all we do.
6455 Reid Woods Drive RR#4
Elmira, ON, Canada
Toll-free (North America): 1.888.856.6613
Phone: 519.669.9488
Fax: 519.669.5808
Email: sales@tubeline.ca
Tubeline Manufacturing sold their first inline balewrapper in 1995. Today the balewrappers are shipped into 6 continents and continues to be the flagship product of Tubeline's hay equipment. Numerous hay handling and processing machines have been added over the years, including the addition of Nitro Spreaders.
Our Mission
Our mission is to provide innovative equipment and value to our customer, by being founded on Christian principles and Honoring God in all we do.
6455 Reid Woods Drive RR#4
Elmira, ON, Canada
Toll-free (North America): 1.888.856.6613
Phone: 519.669.9488
Fax: 519.669.5808
Email: sales@tubeline.ca
Video
Tubeline - TL360 Full Unit Overview Tutorial
zhlédnutí 323Před rokem
Tubeline - TL360 Full Unit Overview Tutorial
Tubeline - TL360 Tongue Overview Tutorial
zhlédnutí 64Před rokem
Tubeline - TL360 Tongue Overview Tutorial
Tubeline - TL360 Hoop Overview Tutorial
zhlédnutí 151Před rokem
Tubeline - TL360 Hoop Overview Tutorial
Tubeline - TL360 Converting Unit for 5ft Bales Tutorial
zhlédnutí 74Před rokem
Tubeline - TL360 Converting Unit for 5ft Bales Tutorial
Tubeline - TL360 Sensor Overview Tutorial
zhlédnutí 50Před rokem
Tubeline - TL360 Sensor Overview Tutorial
Tubeline - TL360 Bumper Tail Overview Tutorial
zhlédnutí 75Před rokem
Tubeline - TL360 Bumper Tail Overview Tutorial
Tubeline - TL360 Display Panel Overview Tutorial
zhlédnutí 50Před rokem
Tubeline - TL360 Display Panel Overview Tutorial
Tubeline - TL360 Cut & Hold Overview Tutorial
zhlédnutí 73Před rokem
Tubeline - TL360 Cut & Hold Overview Tutorial
Tubeline - TL360 Control Panel Overview Tutorial
zhlédnutí 64Před rokem
Tubeline - TL360 Control Panel Overview Tutorial
Tubeline - TL360 Arm & Finger Overview Tutorial
zhlédnutí 85Před rokem
Tubeline - TL360 Arm & Finger Overview Tutorial
Tubeline - BF8000 Removing Netting Tutorial
zhlédnutí 186Před rokem
Tubeline - BF8000 Removing Netting Tutorial
Tubeline - BF8000 Dispatching Bale From Table Tutorial
zhlédnutí 140Před rokem
Tubeline - BF8000 Dispatching Bale From Table Tutorial
Tubeline - BF8000 Proper Loading Arm Height & Adjusting Bale Position Tutorial
zhlédnutí 223Před rokem
Tubeline - BF8000 Proper Loading Arm Height & Adjusting Bale Position Tutorial
Tubeline - BF8000 Tightening Bed Chain Tutorial
zhlédnutí 58Před rokem
Tubeline - BF8000 Tightening Bed Chain Tutorial
Tubeline - BF8000 Replacing Fingers Tutorial
zhlédnutí 135Před rokem
Tubeline - BF8000 Replacing Fingers Tutorial
Tubeline - BF8000 Mechanical Diverter Valve Pad Tutorial
zhlédnutí 119Před rokem
Tubeline - BF8000 Mechanical Diverter Valve Pad Tutorial
Tubeline - BF8000 Best Practices Tutorial
zhlédnutí 333Před rokem
Tubeline - BF8000 Best Practices Tutorial
Tubeline - TL1100R Automatic Wrapper Tutorial
zhlédnutí 2,3KPřed rokem
Tubeline - TL1100R Automatic Wrapper Tutorial
Silage How and Why (Bernard Adams 2013)
zhlédnutí 509Před 2 lety
Silage How and Why (Bernard Adams 2013)
Tubeline Inline 5000 Instructional Video
zhlédnutí 7KPřed 3 lety
Tubeline Inline 5000 Instructional Video
Tubeline Wrappers - Laser Guide System
zhlédnutí 1,3KPřed 4 lety
Tubeline Wrappers - Laser Guide System
I’ve tried rebaling those big squares into small squares. Can never make a nice bale, and the small baler doesn’t like the flakes.
Does this machine do round bales?
More talk about how it works,and cut music out ,it may be a good selling machine,please talk in next video.
Hello, Unfortunately the BaleLiner is currently discontinued.
Looks good
How much can it carry in tons ?
25 Ton
Маловат братан.😂
Do you have a round bale feeder
Hey Glen, we do! It's called the Boss R. You can check it out here: www.tubeline.ca/products/processors/bossr.php
isnt it supposed to move faster? it looks like a lot of foil is wasted
Hey Andrei, so the speed of the hoop actually doesn't have any real impact on the amount of film being used. Ideally you want to have about 5" of offset between film layers to ensure a proper seal for fermentation. This can be dialed in on all our units to any users preference. If you would like to learn more about the process we have a great video that explains the process in 5 mins. czcams.com/video/6BVotJsNpaI/video.htmlsi=8WhwpY7SiQyhT912
czcams.com/video/lSm6hx5L7gc/video.htmlsi=IwntI0Vk6YL8Og0O❤❤
Wow tell me that isn't plastic
I thought hat was supposed to dry before wrapping it so it wouldn’t get moldy
Hey Mardi, so these bales would have dried before being baled. Depending on what you are bailing, its ideal that you wait for a 60% moisture level before you starting to bail. If you would like to learn more, we have a short 3 min booklet explaining all the ins and outs of high moisture hay. tubeline.ca/pdf/how&why.pdf
Very Cool!
Cool👍
Can buy this attacment in italy?
Hi Luca, unfortunately we do not have any dealers located in Italy. We do however have some located in the UK.
The original tubeline wrapper concept was designed and built in Scotland by a company called Gray's. Their machine only wrapped the outside of the bale not the ends. The first bale was bagged or a single wrapped bale. The bales were pushed down a sloping ramp until they made contact with the ground which then in turn moved the wrapper along. The line could be made as long as you had space to allow. If you had the bales ready to load on to the wrapper rates of up to 90 bales per hour could be achieved with 2 loaders. The savings on wrap were great as the ends of the bales didn't get wrapped as they were in contact with the next bale making an air tight seal. To finish a Tubeline you put a wrapped or bagged bale on i Then you pushed the line off and moved the wrapper to start the next line. They were also useful for weather proofing hay or straw that hadn't got undercover storage for it.
👍👍
Impressive, wish I had one‼️👍
Foli
Ile tej roli idzie masakra
I love this one , new design
If you use a mower conditioner is not the best next step a tender???
Sorry Tedder???
that's a fine spreader and very well put together
that's a monster of a muckspreader ,top class
Says can handle bales up to 6ft in length but a standard bale is 8ft long. Can you not fit a 8ft bale in length on this machine?
Donde puedo comprar en Europa?
All you done is copy Hustler feeder made in New Zealand 🇳🇿
Praic is USA Dallr.
This design has been around Ireland and the UK for many decades and in Europe too, great and highly popular way to put up a pile, but its really originally a 3pt hitch tool, not as commonly used on a loader, but if it is, gives the advantage of also used to pack or "tamp" down the slopes and sides. Great to see them catching on here in north America and to see them being built here too. They really excel in heavy crops like alfalfa
mistyped technobale lmao
Looked up techno blade but messed up and found this
Surprised nobody is talking about technoblade
Price
We load 3x3x6 square bales with skid steers with a bale grapple/squeeze. They do no have a lot of reach beyond the front of the skid steers. How should we load a bare bale onto the rotating platform, and on top of the trailing end of wrap, Before I have removed the wrapped bale from where it rests on the ground?
Hi David, when you load with a skid steer we recommend that after you dump the wrapped bale you rotate the table about 30 degrees then actually load over the right rear tire. If you'd like to contact us at the office 1.888.856.6613 then we'd be happy to discuss further if needed or answer any other questions you might have. Thank you!
Has anyone used a flat 10 configuration, is there any trouble turning the back bales in heavy crops traveling slow speed?
That's a beautiful spread
Thinking about getting one do you know how they work with dry hay
Doesn't lubricating the chains allow for additional dust collection in the machine? that sounds like it would bring more harm than good..
I don't have this machine, but I do cut and bale a lot of hay,and there generally isn't a lot of dust at this stage of the game. The hay is still drying, so leaf dust or field dust should be minimal.
Anyone used a 8+4 ? Not one video out there about them
Nice
Great design looks easier to use than Anderson's setup
I bet that thing cost like $50, 000 and that music is horrible
mark richards a lot more than 50, I bet 75, A regular inline wrapper is about 40 now
How do you get that final bale in the cradle without sticking the bail spikes through the end cap?
good question, but there is an easy simple solution. look in the video from 1:28 hehe he put the end platic cap on, right before feeding the last bale out
I have a single wrapper also, so I wrap a few singles for end bales. Starter bale you can spear the end since it will have more bales pushed against it, covering the hole. Final bale I spear from the side, and set it on the wrapper from the side, Then the end is untouched.
Simple , drop it in from the side , preferably not the side with the controller
To be fair if I was a cow I don't think I'd eat black hay😫
Truth be told it was actually perfect double cut clover bales.
😂
Old
Hey I'm curious how much roughly does a tubline 5500 ecv weigh? Thanks
Hi John, the approximate weight of the TL5500 is 5,250lbs. tubeline.ca/products/wrappers/tl5500.php We hope that helps!
TubelineMfg thanks it does!
We own one of these and I would like to know if there is an optional brake that we can install. I've had instances were when I set a tight bale in the cradle and back up I end up dragging the machine even when I have it set all the way on the ground.
Hi Drew. There should be a standard Cam Brake system installed (2:00). If you still have questions or concerns, please feel free to call Tubeline at 1-888-856-6613.
Great video!
Nice
who is an agaent in australia for one of these? Do you need an agent maybe???? :-)
Hi Rod For information on this product please visit www.farmtech.com.au . This is are our dealer for Australia, based in Victoria. For anymore questions or assistance feel free to drop us an email at sales@tubeline.ca Thanks
perfect if your straw is dry , it cant handle anything frozen also its bs about hi flow it wrecks the pump
only thing that can ruin a well buildt hydraulic pump, is to little oil in the system, overheating ore DIRT-SAND IN THE OIL. to small pump just compared to the thing it shall drive, just reduce the speed.